Best Hubbell Wiring Device Kellems Motion Activated Switches in 2026

Automatically turns the lights on when you enter the room and off when you leave

Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently

Optional: senses daylight so lights do not turn on when there is enough natural light in the room

Sensor wall switch detects motion to automatically turn lights ON and OFF based on the movement detected in a room

Passive Infrared (PIR) sensor detects motion with 180° field of view; advanced PIR reduces false triggers from unwanted movements; adjustable sensor range includes 25%, 50%, 75%, and 100% options

Motion sensor wall switch features a universal wiring design with interchangeable hot and load wires to make installation easier; no longer second guess which wire goes where

【Not Only A Light Switch】:SOZULAMP illuminated wall light switch is a standard single pole rocker light switches, just a screwdriver is enough to replace any standard switches with ease; Built-in hidden led nightlight protect kids from electrical shock; The hidden night light shines a pool of soft, glare-free lighting down the wall onto the floor that is just bright enough to light a pathway to where you are going in your home, prevent you from stubbing your toes or falls during midnight.

【Widely Applicable】:Just the right amount of light from a row of leds on the bottom edge of the light switch(not super bright like a night light), that doesn’t interfere with sleep; don't need to turn on the ceiling light and hurt eyes in the middle of the night; also helps locate the light switches at night; don’t have to fumble for the light switch; you can use the led night light wall switch for the outside lights and check the led at night to make sure you have turned the outside light off.

【Energy Efficient】:There is a small dot on the rocker switch itself behind which there is a dusk to dawn sensor, it means that the LED’s brightness varies with how bright the light in the room is. turns on as it gets dark and load is "OFF", turns off as brightens; The led night lights are super power-efficient, costs less than 10 cents to run annually, save money on your electricity bill. last about 25 times longer than incandescent.

【PIR Motion Activated】The PIR motion sensor switch can detect human movement through infrared rays emitted by the human body to automatically control lights, etc.

【Easy to Operate and Use】The latest PIR motion sensor can precisely adjust the light intensity, delay time and light sensor with just push of a button.No more adjusting values with a screwdriver to save you the trouble.

【Quick&Accurate Dimmable and Delay Time】Dimmable default setting100%, Adjustable from 15%, 30%, 45%, 60%, 75%, 100% by long press; Delay time default setting 15s(15s,30s,60s,3mins,5mins, 15mins, 30mins adjustable).

【Advanced Motion Detection】Completely hands-free and smart operation of your connected lights. The switch automatically turns lights on when motion is detected and turns off after a preset time. Ideal for areas such as bedrooms, hallways and restrooms where hands-free operation is ideal.

【Daylight Detection】Smart ambient light detection will sense daylight and prevent lights from turning on during the day.

【Smart Mode & Away Mode】Set different light triggers based on your routine for effortless control. Automatically turns devices on and off at different times to give the appearance that someone is home.

Product 1: Light Switch - One (1) Digital Countdown Timer Rocker Light Switch

Product 1: Use - Upgrade your existing switches with this Pass & Seymour lightswitch with an integrated digital countdown timer with four pre-set countdown times of 60, 40, 20 and 10 minutes

Product 1: Convenience - Control lights, fans or heat lamps manually with the paddle switch or use the timer buttons to shut off a light or appliance automatically after a designated period to save on energy costs

✅【Easy to install】 No neutral wire required 【Grounding Wire is Required for Function】 - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.

✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.

✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.

CONVENIENT: automatically turns lights on/off based on motion. Provides 180° Field-of-View, 900 sq. ft. of coverage

EASY TO INSTALL – slim profile fits in most wallboxes. 150W LED/CFL, 250W Incandescent/Halogen, 200VA Magnetic Low Voltage, 250VA Electronic Low Voltage, 2A Resistive

FLEXIBLE – for homes new or old, can be installed with or without a neutral wire. A ground wire is required for installation

SAVE TIME AND MONEY: Tired of replacing an entire lamp or over paying for a quick touch sensor replacement, this easy to install sensor is what your'e looking for! This kit comes complete with an easy wiring diagram and 4 wire nuts to connect each wire.

Wattage Rating: 150W 3 way touch sequence LO-MED-HI-OFF, Compatible with three-way light bulbs, or one-way Light bulbs, LED and Incandescent. NEW 20% Smaller sensor allows for easier installation for existing or non existing touch sensor devices.

Industry Standard: This style touch sensor is UL certified and used everyday for lamp repair by your local professionals, they are reliable and top quality.

✅100% REFUND GUARANTEE: Welcome order ECOELER Sensor Switch products. If you don't absolutely love our product, let us know and receive a full, no questions asked refund. During used, if our Motion sensors is broken, don’t working, please contact us, we will refund or pay a new one to you.

✅NEUTRAL WIRE REQUIRED, The Pir sensor switch requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Please confirm you’re wiring setup before purchase. If you have any doubt, please consult with a licensed electrician.

✅VERSATILE SETTINGS: The Light switch sensor features adjustable settings. Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins, Adjustable sensitivity, Adjustable Light level sensing.

Light Switch - One (1) 15A Nickel Grounded Single Pole Switch

Use - Replace a standard lightswitch in as little as 10 minutes with this Pass & Seymour three-way switch to control lights or an electric appliance from two locations

Smooth Operation - Paddle rocker switch with a low profile makes it easy to control lighting and a subtle white LED light makes it easy to locate the switch

Multi-location, single pole or 3-way

Up to 6-Amps for lighting (120 Volts or 277 Volts) and 3-Amps for fans

Works with incandescent, halogen, magnetic and electronic low-voltage and non-dim LED and non-dim fluorescent bulbs, as well as general purpose fans

✅ PLEASE CHECK WITH A QUALIFIED ELECTRICIAN TO DETERMINE IF YOU HAVE THE PROPER WIRING

✅【3-WAY SWITCH】This occupancy sensor switch is a 3-way switch allowing the lights to turn on from multiple switch locations in the room.

✅【Hands Free】Enjoy the convenience of hands-free lighting control. The motion sensor switch detects your presence and activates the lights, eliminating the need to fumble for switches in the dark.

【PIR Motion Activated】The PIR motion sensor switch can detect human movement through infrared rays emitted by the human body to automatically control lights, etc.

【Easy to Operate and Use】The latest PIR motion sensor can precisely adjust the light intensity, delay time and light sensor with just push of a button.No more adjusting values with a screwdriver to save you the trouble.

【Quick&Accurate Dimmable and Delay Time】Dimmable default setting100%, Adjustable from 15%, 30%, 45%, 60%, 75%, 100% by long press; Delay time default setting 15s(15s,30s,60s,3mins,5mins, 15mins, 30mins adjustable).

Automatic Induction. The light will be activated ON/OFF by auto PIR motion detection

Flexible timing setting from 2s to 360s for how long the light stays on.

0 to 7 meters detecting range and high sensitivity

Manual ON/Automatic OFF, provides 180-Degree field of view and 900 square feet of coverage

600W Incandescent/Halogen, 150W LED/CFL, 600VA Fluorescent, 1/6HP Motor loads. No Neutral wire required for installation

California Title 20/24 Compliant

➤Operating voltage: DC 6V-24V Load current: 5A

➤Detecting range：110 degrees cone angle; Blockade time: 0 seconds

➤Trigger Way: Continuous triggering,Light Sensor: 10LUX

✔Neutral Wire Required: Please review your wiring setup prior to purchase. The PIR infrared motion activated wall switch is need NEUTRAL WIRE (not suitable for 3way). If you have any installation issues, please consult an electrician or contact us through message, we will provide you technical guidance.

✔Easy Custom Modes: Light switch sensor features adjustable settings. Adjustable time delay from 15sec-1min-5mins-15mins-30mins, adjustable sensitivity and adjustable light level sensing. So you can set the switch according to your own needs.

✔Variety Modes Choice: The sensor light switch has three modes, OCCUPANCY (OCC) Mode: auto on & off, VACANCY (VAC) Mode: manual on & auto off and OFF Mode: manual on &off. Make your home smarter with a single switch.

Automatic Induction. The light will be activated ON/OFF by auto PIR motion detection

With light Sensor (Use at night or in dark light); Without light sensor (Used by day and night)

Timing setting from 15s to 360s

Wire: approx 3" long, Voltage: AC 90V-220V; Detection distance: <12m (18 degree); Delay time: 5S - 6mins; Environmental illumination: 2 - 2000LUX

Operating Voltage and Current Rating: the supply voltage of PIR controller is 12 V to 24 V, and the electric current is 6 A; Please confirm the relevant parameters before use to ensure safety

Adjustable Detention Period: the sensing distance of the PIR motion sensor is about 5 m/ 16.4 ft to 8 m/ 26.25 ft, and there is a time setting button at the back of the controller, which can be rotated to set the delay minutes of turning off the switch from 1 to 10 minutes

Operating Principle: the working principle of the PIR sensor, whose sensor sensing angle of view is 120°, that the load switch is controlled by the infrared detecting mode, is simple, and you can install the sensor in the proper environment according to your actual needs

Lighting Control – Conveniently control indoor lamps, lights and seasonal décor with this door activated entry transmitter and plug-in receiver featuring 1 polarized outlet

Wireless Sensor – Transmitter mounts to any door entry with included adhesive tape; can be placed on any door up to 150ft. from receiver – 1 CR2032 battery is included to power transmitter

Door Activated – The sensor will activate connected lights or fixtures as soon as the door is opened; device will turn off when door is closed or up to 20 minutes after turning on

Impact-resistant face and back body

GE Lexan high impact-resistant lens

External screw-pressure-plate back and side wired. Accepts #12 and #14 AWG

✅【Three Working Modes are Available】 The sensor switch has Occupancy sensor switch (Auto turn on/off), Vacancy sensor switch (Manual turn on, auto turn off) and ON/OFF switch (Manual turn on/off). You can set it what you need.

✅【Easy to Operate and Use】 The motion sensor switch is just by pressing button to adjust the value of Delay-time and Light Sensor, don’t need to open the cover and adjust the value with a screwdriver, this save you the hassle.

✅【Quick and Accurate Setting】 You can get the exact Lux value and time delay. Light sensor : Default 25Lux(±10Lux), 15Lux, 35Lux , OFF optional; Time-Delay: Default 1min(15secs, 1min, 3mins, 5mins, 15mins, 30mins adjustable)

SAFE TO TURN ON & OFF FROM A DISTANCE: Infra-red Non Touch Hand Wave Sensor Switches are ideal to avoid catching virus and germs. Unlike any physical switches, these IR sensor switches are contactless, non-invasive, relatively inexpensive and can be used to switch on/off any 12-24VDC LEDs and devices from a distance.

EASY TO INSTALL AND OPERATE - Each IR sensor switch comes with an adhesive tape for mounting to any clean and flat surface. Simply wave your hand over the infrared sensor to light up your LEDs. Wave your hand over again to turn your LEDs off.

POWER UP TO 3 AMPS: Works on any 12-24V LED light. You can always just snip off the power plugs, and wire up directly to a low voltage 12 - 24VDC power source. Then wire in your LEDs, LED strips, LED tubes, LED floods, etc.

Wall switch occupancy sensor

Pir occupancy detection, self-contained relay

Push button programmable; adjustable time delays

Ceiling Mount Sensor - 360° PIR ceiling mount occupancy sensor with automatic light ON/OFF feature. Provides 530 sq. ft. circular coverage and can be mounted up to 10 feet high.

Time-Controlled Lighting - Set your desired time for automatic light shut off. If no motion is detected within a range of 18 seconds to 10 minutes, the light will turn off. Control switches are conveniently located under the included cover plate.

Specifications and Compatibility - Max load incandescent: 1000W @ 120V, 150W Max Load LED, 1/4 HP, No Minimum Load. Compatible with LED, Incandescent, Electronic Ballast Fluorescent, Compact-fluorescent (CFL), Magnetic Low-Voltage (MLV) & Electronic Low-Voltage (ELV).

✅OCCUPANCY LIGHT SWITCH: Passive Infrared (PIR) occupancy detection, uses infrared signals to detect moving objects, to automatically turn ON/OFF lights. PIR motion sensor a bright LED indicator when the activated motion.

✅VERSATILE SETTINGS: Light sensor switch features adjustable settings. Adjustable time delay from 15sec-30min, Adjustable sensitivity from 20-100%, Adjustable Light level sensing.

✅360° DETECTION RANGE: Installed at 10 ft (from 5-15 ft), sensor detector provides 360-degree detection with 20-ft detection range. Ideal for hallways, bathrooms, storage areas, closets, mud rooms, pantries and more.

Includes one LIDER motion sensor switch and one LIDER wall plate LWP-31M-W to form a complete set; for a cohesive look throughout your space, always use LIDER devices and wall plates to ensure a perfect fit and color match

Sensor wall switch detects motion to automatically turn lights ON and OFF based on the occupancy or vacancy in a room

Passive Infrared (PIR) sensor detects motion with 180° field of view; advanced PIR reduces false triggers from unwanted movements; adjustable sensor range includes 25%, 50%, 75%, and 100% options

Motion Sensor Switch working voltage :100-240V ; Load Power :≤40W （the load power must be under 40W）； Best sensing distance:2-6M ;Installation Height:≥3.5m; Recommended Installation Hole:φ20mm

Infrared sensor switch has feature of small size , lightweight,energy-saving and lowheat . Easy to install and operate in room or cabinet, plug and play. The sensor switch can be embedded or surface mounted .It is perfect for using snesors in home corridor stairs basement.

Motion sensors will turns lights ON in the dark when human enter into the induction range and Off after 45S if the motion is undetected .It only work in night or dark .It is suggested that sensor installation height is about 3.5m;Best sensing distance is 2- 6M;Induction angle is front 110°