Best Amprobe Multimeters in 2026

Versatile Digital Multimeter - Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Temperature

Thoughtful Design - Support Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make the process of measurements easier. Professional level is reflected in some features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage

Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately.

SAFETY FIRST: It will send out multiple alarms through sound and light. When the voltage is detected, the tip will send out red light and beep. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the screen will be red or green, red means high voltage and live wire are detected, green means low voltage and null wire are detected.

NON-CONTACT: With NCV inductive probe for AC voltage; Just place the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire. Ideal for breakpoint Test. Handy circuit tester for electricians, homeowners.

DUAL RANGE: Detects standard and low voltage (12-1000V AC / 48-1000V AC) for more sensitive and flexible measurements. Press the S button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring etc.; The NCV sensor automatically recognizes the voltage and displays it on the bar graph.

True-rms for accurate measurements on non-linear loads

safety rated

Large white LED Backlight to work in poorly lit areas

Automatically measures volts ac and volts dc with precise digital resolution

Displays resistance to 1000Ω

Easy and accurate OpenJaw current measurement

Multimeter measures up to 600V AC/DC voltage, 10A AC/DC current and 40 MOhms resistance

Electrical tester measures temperature, capacitance, frequency, duty-cycle, and test diodes and continuity

CAT III 600V safety rating

Basic dc accuracy 0.5%

CAT III 600 V safety rated

Diode and continuity test with buzzer

Aenllosi Storage Case Compatible with Amprobe AM-510/AM-520/AM-530/AM-560/AM-570 TRMS Electrical Contractor Multimeter

Features: Case is made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes

With Internal mesh pocket can store other accessories at your convenience

Automatic AC/DC voltage tester for residential or commercial use; tests receptacles, lights and appliances

Compact, pocket-sized and easy to use. High quality construction for years of service.

Bright neon lights indicates AC and DC voltages even in well-lit rooms

POWERFUL CIRCUIT TRACER: Your Ideal troubleshooting solution. Finds breakers and fuses, splice errors, dead shorts, wires in walls ceilings and floors, and buried conductors. Works on energized or de-energized circuits (0-600V AC/DC).

CLEAR INDICATION: Audible indication intensifies with signal strength. A red LED display indicates a numeric value (0-99), providing a quick and easy way to determine signal strength and proximity to a conductor carrying the signal from the transmitter.

IDEAL SURETRACE TECHNOLOGY: SureTrace Circuit Tracers feature a rotating display in the industry. Regardless of the position the tracer is in, the display will orient itself in 90 degree increments to an easy-to-read vertical position.

VERIFIES VOLTAGE PRESENSE: Verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting (GFI6302 and VD6504)

DURABLE: Hi-Impact Resistant ABS housing with soft over-molded rubber grips with a compact ergonomic design (GFI6302 and VD6504)

QUICKLY READ: Bright color-coded neon lights for easy visual indication (GFI6302)

Pocket sized with 37 measurement ranges including AC/DC voltage up to 600V, AC/DC current up to 400mA, and duty cycle

Large 3-3/4 digit, 4000 count display

Auto-ranging with diode test, continuity test, and data hold

Multi-function Tool: 890Z Multimeter can measure AC/DC current, AC/DC voltage, resistance, frequency, capacitance, continuity, diode, transistor (hFE), and temperature. Suitable for industrial, household, automotive use.

Operational Safety: Double fuse protection against burnout and overload. Silicone cover can protect the multimeter from damage and electric shock. When the battery is low, it will display low battery indicatio

High-end Display: Designed with 6000 counts LCD display, Backlight function helps to see the readings in dimly-lit areas. And the build-in torch will light up the dark places.

【Versatile Multimeter】VENLAB VM500A Digital Multimeter can accurately measure up to 600V AC voltage,600V DC voltage,10A AC/DC current and 60 MOhms resistance,this multimeter tester also tests temperature,capacitance,frequency,duty-cycle,wire on-off,diodes and continuity.Various functions can meet your various needs about circuit detection and maintenance

【Non-contact Type】VENLAB VM500A Digital Multimeter Tester is Equipped with NCV function so you can use this multimeter to detect AC voltage without using test leads,sound flashing warning function for high voltage can remind users to pay attention

【Easely Use】VENLAB VM500A Digital Multimeter has many user-friendly functions,it supports data hold,hanging magnet,rubber sleeve support stand,continuity buzzer,automatic shutdown, it also has the function of measuring the load of 1.5V,9V and 12V batteries,the backlit LCD display and flashlight lighting makes it easy to use in dimly light areas.These convenient functions make automotive vehicle owners, house owners and DIY amateurs to use this digital multimeter very easily

Non-contact voltage tester for detecting A) voltage on cables, circuit breakers, wall sockets, junction boxes, and other electrical wiring

Average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform

Tester illuminates when AC voltage is detected

Socket tester for checking and confirming the proper wiring of AC outlets

Three incandescent lights indicate open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, and correct wiring

Operates on 110 to 125V AC outlets

REMOVE battery INSOLATION beofore use. Auto range pocket size digital multimeter

3 1/2-digit LCD, with a max. Reading of 1999 multi meter digital

Design for measuring DC and AC voltage, DC and AC current, resistance, diode and continuity.

Digital multimeter measures alternating current (AC) voltage and direct current (DC) voltage to 600 volts (V), resistance to 6 megaohms, capacitance to 2,000 microfarads, frequency to 30 kilohertz (kHz), and AC and DC microcurrent to 2,000 microamp

Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform

Non-contact voltage detector senses AC voltage without making contact with the circuit

►Rigid Back Test Pin Set

►2" Long Pins Pass Between The Weather Pack Seal and Wire

►A Sharp Point Ensures Good Contact To the Electrical Connector, and The Pin's

Inductance To 40 H, Frequency To 40 MHz, Capacitance To 400 microF, Logic To 20 MHz

Input Warning Tone When Test Leads Are In Wrong Jack

10,000 Count, 0.1% Accuracy

Display voltage and amps concurrently with large LCD dual display

True-RMS for accurate voltage measurements in noisy environments

Low pass filter for current and voltage measurements on variable frequency drives

VERSATILE DIGITAL MULTIMETER: Suitable for all kinds of household use and industrial use. Can be use at Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc. It is a AC/DC Voltmeter, Ohm Volt Amp Tester, Electric Ohmmeter, Diode, Resistance and Audible Continuity Detector.

Troubleshooting with Speed and accuracy: This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.

Electronic Tester Multimeter with Over-load Protection and Low-Power Reminder: Use the PTC protection circuit for Resistance, and frequency measurement. Over-load indication "1" will be displayed; Low battery indication will be displayed when battery power is low.

Voltage up too 600V AC/DC, AC/DC current, resistance and frequency

True-rms feature to accurately measure voltage and current in all conditions, including noisy environments affected by harmonics

Capacitance for start-up and run capacitors

【True-RMS Digital Clamp Meter】This is a dual impedance true RMS digital multimeter integrating a variety of measurements like 1000 Amp AC/DC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity, Temperature, NCV, VFD, Inrush Current, etc.. And there are more functions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key. Easy to use for labs factories and household.

【Inrush Current Meter】Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting circuit. The measuring time of inrush current is about 100ms. Multi‑purpose clamp meter is made of high quality ABS meterial, with large LCD screen, which can display the measurement results clearly.

【Easy to Operate】The digital clamp tester has multiple functions to use, very simple and convenient, full range overload protection, data retention, undervoltage indication. Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. Convenient LED flashlight illuminates a dimly lit area.

Residential electrical test kit includes AM-420 Digital Multimeter, VP-1000 Non-Contact Voltage Probe, ST-102B Socket Tester with GFCI and all required batteries

Kit contains tools to measure voltage up to 250V AC/DC, DC current and resistance, and battery tests

Check for presence of voltage in receptacles, switches, extension cords and light fixtures

Digital multimeter measures alternating current (AC) voltage and direct current (DC) voltage to 600 volts (V) and resistance to 34 megaohms

Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform

Meter measures 5.1 x 3.1 x 0.6 inches (H x W x D) and can be carried in a pocket

✅【Professional High Precision Multimeter】AP-770D professional multimeter with 40000 Counts display and excellent precision to accurately measure AC/DC voltage, AC/DC current, resistance, capacitance, temperature, frequency, duty cycle, diode test, hFE test, true RMS, relative value and bar graph display.

✅【Gathers All Functions in One DMM】Supports NCV, Max/Min, auto backlight, auto power off, zeroing, continuity buzzer, ℃/℉ unit conversion, one button to lock the data, function switch indicator lamp and low battery indicator, all those functions for bringing you the biggest convenience in measurement.

✅【Mechanical Protection System】This multi tester has a unique mechanical protection function to prevent users from inserting the wrong test lead into the wrong port because of confusion or carelessness. After you choose the measure mode and correctly insert the test leads into the port, please note that DO NOT dial the dash board.

✔【PROFESSIONAL MULTI-TESTER】 6000 Counts Display, Test for AC DC voltage current resistance, Diode continuity capacitance Temperature , Frequency, Duty Cycle, NCV, Ture RMS, hFE, capacitor, Relative Value , Data Hold, Auto Back Light, Auto Power off,

✔【Mechanical Protect System】In the daily usage, user often inserts the test leads into the wrong port because of confusion or carelessness which would burn down the multimeter, cause unnecessary loss.The system blocks the unused ports to prevent misoperation or mis-plug the test leads

✔【Wider Measuring Range】Large Tall Reading, Measure AC Voltage Max 750V, DC Voltage Max 1000V. 20A Current, 60MΩ Resistance, 99.99mF Capacitance, -4 to 1832℉ Temp, 9.999MHz Frequency, 99% Duty Cycle, Sampling rate 3 times/second delivers high precision readings.

True RMS for accurate AC measurements

LoZ prevents false readings caused by ghost voltages

Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals

[1mA Resolution]: Delivers 1mA resolution and sensitivity, which make it a great a tool for measuring such as parasitic draws.

[Dual Line Display]: Dual line display can show both AC voltage/current and frequency or Celsius and Fahrenheit on the screen.

[Low Impedance Mode]: Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.

✅【True-RMS Clamp Meter 】This true RMS digital multimeter can measure accurately with a resolution of up to 1mA, 100 Amp AC/DC Current, 600V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity, Temperature. A perfect troubleshooting tool that will help you solve electrical problems in the car, school, industrial or at home quickly and safely.

✅【Multi-Function】The amp meter has multiple functions to use, it can be used as clamp meter as well as capacitance meter. very simple and convenient. Hold function locks data for easy reading; Low battery indication; Auto power off after 15 minutes inactivity; NCV detection; SEL fuction; Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple.

✅【Advanced Functions】Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage, without touching any wires. The Clamp Meter has ZERO Function,Clear the low number of the DC.When the measured value exceeds the range, "0L" or "-0L" will be displayed on the screen.