Best Hifonics Power Amplifiers in 2026

Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Includes: Amplifier. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Features: Rockville dB45 3200 Watt/800 Watt Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp, Loud!!.

Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 200 Watts x 4 Channel <1% THD+N . - 4 Ohm:135 Watts x 4 Channel <1% THD+N. - 4 Ohm Bridged: 400Watts x 2 Channel<1% THD+N.

Power - 1000 Watts Max x 2 @2-Ohms, 500 Watts Max x 2 @4-Ohms, 2000 Watts Max x 1 Bridged @4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

UPGRADED CHIP WITH 80W+80W : NEW F900S bluetooth receiver amplifier provides 80W+80W dual channel stereo output with the Upgraded chip MA12070, which is more powerful! Impedance: 4~8 Ohm.

THREE INPUT OPTIONAL: Supporting AUX/ USB/ Bluetooth input. But the amp module can be searched and connected via Bluetooth when unplugging audio input line. Insert audio input line, then it will auto switch to wired input mode, Bluetooth function will be lost.

SUPER COMPATIBILITY: Our Bluetooth audio transmitter can be widely applied to various tablet PC, TV, smartphone, Laptop with Bluetooth and etc, versatile and simple to use. But it does not apply to a range of products launched by Amazon such as Echo, Alexa ect. and Bose Speakers.

Class D MOSFET Monoblock Power Amplifier

Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts

Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz

UNMATCHED 3D REALISM FOR YOUR HOME THEATER SYSTEM – Enjoy Immersive surround sound with Auro-3D, IMAX Enhanced, DTS Virtual:X and Dolby Atmos and crisp, clean picture with advanced video processing, 8K/60Hz, and 4K/120Hz pass-through

Enjoy high quality 3D audio & video knowing that AVR-X6700H IS 8K READY WHEN YOU ARE; This high-power amplifier capable of 13.2 channel processing allows to build your choice of speaker configuration; TO MEET YOUR EXCLUSIVE ENTERTAINMENT NEEDS

NEXT GEN GAMING – Enjoy a smooth, lag-free gaming experience with spectacular imaging, reduced lag & frame tearing with 4K/120Hz pass-through, Variable Refresh Rate (VRR), Quick Frame Transport (QFT), and Auto Low Latency Mode (ALLM)

HIGH-POWERED CAR AMPLIFIER: Enjoy serious sound beyond standard car speakers with our 3.5-inch class-D amplifier. This car amp has a max power output of 1,800 W and an input sensitivity of 0.2–5 V, so your car’s stereo can reach your desired volume.

PROFESSIONAL SOUNDS: Our car-audio amplifier’s total harmonic distortion (THD) is less than 0.15% for clearer audio. This loud amp also has a signal noise ratio of 70 dB, a frequency response of 8 Hz–180 kHz, and a crossover range of 5 Hz–50 kHz

ADJUSTABLE AMP: With a full MOSFET circuit design and simple bridging operation, this big amp is also phase, subsonic, level, and low-pass-filter adjustable. The included bass remote and knob aid with quick and easy control of the bass level.

PEAK POWER: Max Power 600 Watts. RMS (50 Watts x 4 @ 4-Ohm or 75W x 4 @ 2-Ohm

RMS POWER: (50 Watts x 4 @ 4-Ohm or 75W x 4 @ 2-Ohm. High Quality KENWOOD sound you can depend on

MARINE CERTIFIED: Conformal coated marine grade circuit board is great for any application including Car, Boat, ATV, UTV etc.

1 x Taramps TS400X4 Full Range Amplifier

Quantity: 1 Amplifier Number of Channels: 04 Max Power at 13.8 VDC 2 Ohms: 400W (4 x 100W RMS) Max Power at: 13.8 VDC 4 Ohms: 252W (4 x 63W RMS) Bridged at 13.8 VDC 4 Ohms: 400W (2 x 200W RMS)

Input Sensitivity: 200mV (Vol=Max) Signal to Noise Ratio: greater than 90dB Frequency Response: (Full Range): 18Hz to 30kHz (-3dB) High Pass Crossover (HPF): 90Hz (-12dB / 8th) Low Pass Crossover (LPF): 90Hz (-12dB / 8th)

Power - 600 Max x 2 @ 2 Ohms, 300 Max x 2 @ 4 Ohms, 1200 Max Bridged x 1 @ 4 Ohms

Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

RMS Power Rating: 4 ohms: 500 watts x 1 chan. / 2 ohms: 800 watts x 1 chan. / 1 ohm: 1200 watts x 1 chan.

Pulse Width Modulated MOSFET power supply Wired remote bass level control included

Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection)

HUGE POWER IN A SMALL PACKAGE - 1,600 Watts gives you all the power you need tucked away and out of sight, keeping your vehicle looking clean and neat.

WIDE RANGE OF APPLICATIONS - Ranging from 2-8 ohms, this amplifier will allow you to use a variety of speakers for your specific application. Never again will you need to worry about having the right amp for the job.

EXTREMELY POWER EFFICIENT AMPLIFIER - Push an amazing amount of power to your system while only drawing minimal power from your vechicle's battery.

📢 PEAK POWER: 1000 Watts

📢 RMS POWER: 【4 ohms: 180W x 1 chan.】【2 ohms: 320W x 1 chan.】【1 ohm: 500W x 1 chan.】

📢 COMPACT: Cutting edge Micro Class D technology allows amplifier to be extremely compact. Dimensions: 6.8"L x 3.3"W x 1.5"H

Maximum power @ 14. 4VDC - 2 x 50W RMS (stereo 2 ohms)

Maximum power consumption: 7. 6 amps (musical: 3. 8 amps)

Channels: 2, topology: class-d

1600W Maximum Power Full-Range Amplifier With Bluetooth

Optimized 150-watt RMS output and a max power output of 1600 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road

This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system

6000 Watt Monoblock Class D Car Amplifier

RMS Power Rating: 1020W x 1 @ 1 Ohm / 720W x 1 @ 2 Ohms / 420W x 1 at 4 Ohms

Frequency Response (+/- 1db): 10Hz - 300Hz

8 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA820 is engineered as a 8 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters.

PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level inputs.

SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions.

60 WATT POWER: The Pyle Dual Channel HiFi Audio Amplifier gives your entertainment or PA system a boost! Offers low distortion and acoustically accurate audio reproduction. Supports speakers w/ 2-8 ohm impedance allows you to enjoy high quality audio

CUSTOMIZABLE SOUND: It features tone and direct switch. It allows adjustment of how much bass and treble get through to be amplified. By switching to direct the filters are removed from circuit and the signal coming in is amplified w/o any filtering

MULTIPLE DEVICES: The professional mini class T amp supports various external devices. Connect smartphone, iPhone, iPad, MP3 to the 3.5mm AUX/RCA input and enjoy surround acoustic audio w/ the speaker. It also has microphone and AUX input for karaoke

4 x 250W RMS @ 4 OHMS - Bass Boost Circuit - Low Pass Filter Controls - S/N Ratio: >90dB - Subwoofer Remote Level Control

4 x 500W Max @ 4 OHMS - Bridgeable at 4 Ohms - High Pass Filter Controls - Channel Separation: >65dB - Fuse: 20A x 2

2 x 1000W Max @ 4 OHMS Bridged - 2 Ohm Stereo Stable - Power and Protection LED Indicators - Freq. Response: 10Hz-45KHz - Dimensions: 14.96''(L) x 2.24''(H) x 8.81''(W)

400-WATT POWER: 400 Watt High Output 4 Channel Amplifier; Max Power @ 2 Ohms: 100 Watts x 4; RMS Power @ 4 Ohms: 38 Watts x 4

4 CHANNEL CLASS A/B: Number of Output Channels: 4; Class A/B circuit design run cooler and more efficiently with low distortion and high reliability

HI/LOW INPUTS: High and Low Level Inputs; Thermal Overload & Speaker's Short Protection

Hifonics ZG-2400.1D Class D Amplifier + Gravity Magnet Phone Holder Bundle

Power Rating: 4 Ohms: 600 Watts x 1 2 Ohms: 1200 Watts x 1 1 Ohms: 2400 Watts x 1

Tone Control/Parametric EQ: Built-in bass control | PWM MOSFET Power Supply

MD 12000.1 - 0.5 ohm amplifier is developed with the highest technology and performance for automotive sound systems, in white color, to make your system more sophisticated, It is mono, with a single channel with a maximum power of 12.000 Watts RMS.

It is a FULL RANGE amplifier, playing all frequencies in the right measure for you, Operation class Class D, Number of Channels 01, Maximum power @ 12.6 VDC - 0.5 OHM: 12,000W RMS @ 12.6 VDC - 1 OHM: 7,200W RMS

Input Sensitivity 220mV, Signal to Noise Ratio >95dB, Frequency Response 10 Hz ~5 kHz (-3dB), Crossover high pass (HPF) 10 Hz ~90 Hz (-12dB/8th) Variable, Crossover low pass (LPF) 90 Hz ~5 kHz (-12dB/8th) Variable, Bass Boost Freq.: 35 Hz ~55 Hz

1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power; 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged

2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply; Series A/B car amplifier; Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion

INPUTS/OUTPUTS: Low level RCA inputs and outputs; Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA)

Operating voltage 9 – 16V RMS power @ 4 ohms 90WRMS power @ 2 ohms 110W RMS bridged power @ 4 ohms 220W Total peak power 880W

Frequency response 20Hz – 20kHz @ -1dB THD + N at rated power (20Hz – 20kHz)<1% Line-in signal-to-noise ratio (reference to 1 watt)>75dB

Maximum high input signal level 12V High input maximum sensitivity 0.5V Maximum line input signal level 5V Line input maximum sensitivity 0.2V

COMPACT DESIGN: Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 8.11″ depth x 8.11″ width x 2.60″ height

POWER: This amplifier is designed to run your stereo system with the power it needs to perform! 1200 Watts maximum dynamic RMS power output of 4x 300 Watts at 2 Ohms per channel. Its high efficiency rate of 84% provides more power with less battery consumption.

BRIDGEABLE: Double the power output to your speakers by bridging two channels. Minimum impedance of 4 Ohms per bridged channel at output power of 2 x 520 Watts RMS

Dimensions (W x H x D): 12-5/8 inch x 2 inch x 6-5/8 inch

Operating Voltage: 14.4V（11-16V allowable）

Current Consumption: 60[A]

Package Includes: (1) Kicker 46CXA4001T CXA400.1 400 Watt Mono Class D Car Audio Amplifier Amp. (1) Kicker 46CXARCT Remote Control For 46CX 45CXA Series Amplifiers Amps

Features of 46CXA4001T: KICKER 46CXA4001T CXA400.1 400 Watt RMS Mono Class D Car Audio Amplifier Amp. Efficient Class-D amplifier. Three-second turn-on/off delay to eliminate unwanted interference. Variable 12dB crossovers provides control to dial in perfect sound. KickEQ 6dB variable bass boost for those additional low frequencies. 24dB subsonic filter for protection from potentially damaging frequencies.

FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio. Accepts up to 40-volt input signal. Small footprint for easier installation. Compatible with CXARC (link to remote) Remote Bass Control. Vertical mounting hardware included for another unique look. Dimension (L x W x H): 12 inch x 9 inch x 4 inch. Weight: 5 lbs

Class-D amplifier design delivers higher efficiency and greater output.

Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.

Conformal coated PCBs provide extra protection from the marine elements.

Powerful and high-quality car audio amplifier with 3000 watts RMS output exclusive for BASS and SUB BASS applications

Built-in EQ Controls including Level, Crossover Subsonic Filter, and Low Pass Filter for customized sound

Bass Boost from 0dB to +10dB for enhanced bass performance. Up to 8 AWG Speakers connectors and up to 4 AWG power and ground connectors for powerful and stable operation