Best Nova Power Lathe Accessories in 2026

Auto-Stop Jaw Slides inhibit the widening of the chuck jaws beyond their optimum clamping range insuring the material is properly secured

Anti-Release Spindle Lock is an exclusive DELTA feature that ensures the chuck will stay securely mounted on the lathe during forward and reverse turning applications

Enhanced jaw gearing provides extra smooth jaw movement and increased clamping pressure for maximum material support

1-inch x 8 TPI to M14-1.5 mounting adapter makes for easy installation and center changes

Three multi-spur drive centers measure in at 5/8-inch, 1-inch and 1-1/2 inch in size

Includes two MT2 live centers: one with crown tip and one without

Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case

Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs. ; pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter

#1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8"; #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4"

1.97" H steel lathe faceplate,resistant to wear and rigid, greatly extend the service life.

4" Steel wood lathe faceplate,the 0.39" thick steel faceplate makes it even more durable. Net weighs 1.87lbs

With 8 screw mounting holes, equipped with 4 sets of screws and 2 wood screws,easy to mount to the workpiece.

✅Product includes: Chuck body, a set of 2" Dovetail Jaw, Tightening Gear Key, T-Allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring-Loaded Center Punch, MAKE SURE check your wood lathe FIT first.

✅Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric coating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life.

✅Powerful and Positive Grip: The Self-Locking system of VINWOX Gear Chuck delivers incredible gripping power after tightening, it will never loosen grip on project. VINWOX offer clients an option at a price that is more affordable than anything of same quality on the market

Scroll chuck perfect for holding bowls, spindles, and other unwieldy lathe projects

Internal jaws tighten around workpieces varying from 1-1/4 to 2-1/2 inches in size

External jaws spread inside of workpieces with pilot holes ranging from 1-3/4 to 3-1/8 inches

The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.

The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy

The working table comes with three T shaped groove, standard size is 15x8x6mm.

This steady rest is compatible with 12" swing lathe. Easy installation, no additional hardware required.

The position of each wheel can be adjusted individually. Which gives it a wide range to easily adapt to any turning pieces from 1/2" to 5.5".

Can be used for turning long spindles like baseball bats, table and chair legs.

Compatible with lathe that use 1”x 8 tpi thread. This set contain 3 frequently used types of jaws so they can handle various shaped blocks

The jaws in this bundle tightly grips from the pens of 1/5” to bowls of 4”, and they can expand to hold the inside of large bowls if you are experienced with turning works thats larger than jaws

This set is easy to install and use. The jaw tightening key allow you to conveniently operate the gripping

【Chuck Clamping Range】The clamping range of the 8 in lathe chuck is between 0.16" / 4 mm - 7.87" / 200 mm, the clamping range of inner jaws (A-A1): 4-85 mm (0.16"-3.35" ) Inner jaw interference range (B-B1): 65-200 mm (2.56"-7.87") Outer jaw clamping range (C-C1): 65-200 mm (2.56"-7.87")

【High Precision Double Jaw Chuck】Model: K11-200A. Jaws: 3 jaws (two tongue and groove reversibly hardened top and bottom jaws) positive L-shaped innernal jaw and inverted L-shaped external jaw allow the chuck to be more stably mounted on the lathe. The alignment accuracy is ≤0.002"/0.05mm, and the higher-precision design guarantees the accuracy of your operation

【High Quality Material】The 3 jaw lathe chuck is made of high-quality precision hardened steel, and the jaws are more compressive and durable than ordinary products.

[PREMIUM QUALITY] The chuck body and bearings are made of high-quality, high-performance steel that is precisely machined to industry standards.

[HIGH-PERFORMANCE JAWS] Multiple jaw sets provide great flexibility to the Aogbra chuck. The self-centering jaws provide superior gripping force, allowing for turning workpieces in a variety of different shapes and sizes.

[PRECISION POLISHED COATING] Premium nickel plating and solid construction greatly reduce rust and maintenance, providing a smooth, accurate and beautiful addition to your lathe.

Premium Material: Diameter: Diameter: 125 mm (4.92 in). The 4-jaw mini lathe chuck body is made of cast iron that has passed rigorous quality tests. So it is rigid and durable.

Reversible Jaw Set: The lathe chuck is equipped with three inward stepped jaws that can be stepped inward or outward to hold raw materials of different shapes.

Enhanced Flexibility: The T chuck key of the lathe part allows the installation of various workpieces. And easy operation reduces changeover time for your convenience.

【Material】Made up of Zinc Alloy material, anticorrosion, not easy to rust, durable and sturdy

【Features】High strength and hardness, small size, comfortable to wear.

【Accurate】With high centering accuracy as well as a large clamping range.

[Parameters]: Fine quality bearing design, using high speed bearing for high accuracy.

[Wide application] Perfect for both wood and metalworking lathe, such as the lathe with a lathe boring tailstock, aim to provide smooth wood turning support.

[Material]: Made of high quality steel, sturdy and durable.

Compatible on mini- to full-size lathes

Can be used as a bowl rest as well as a steady rest

High strength but low weight

Premium nickel plating, minimizes rust and maintenance and is ideal for turning green wood.

Stronger and more versatile 50mm/2” PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.

Precision laser etched jaw numbering allowing ease of jaw and slide alignment, positioning and change out.

PRODUCT INCLUDES: (1) 3.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case

Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with short and long multi-position grip-studs

Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life.

27 PCS Gear Kits: 2 x 80T gears, 1 x 72T gear, 1 x 65T gear, 2 x 60T gears, 1 x 57T gear, 1 x 55T gear, 1 x 54T gear, 2 x 50T gears, 1 x 48T gear, 2 x 45T gears, 1 x 45T gear, 2 x 40T gears, 1 x 35T gear, 1 x 33T gear, 4 x slotless gear, 1 x motor gear, 2 x variable gears, and 1 x belt gear.

High-quality Material: The metal lathe gears are made of #45 steel that features impressive plasticity and hardness. They can stand up to wear and corrosion.

Precise Gear Teeth: The mini lathe gears have been through a deburring process which left clean and precise gear teeth. With these gears, your lathe can work more efficiently.

NICKEL CONSTRUCTION: Premium nickel plating and construction conveniently reduces rust and maintenance

IDEAL FIT: Fits full range of NOVA Chuck lathes for an ideal fit

PRECISE ALIGNMENT: Laser-etched jaw provides precision when adjusting your slide alignment and positioning

powerful clamping (5:1 ratio)

smooth key operation (single hand)

large body doamter (4 1/2 inches),

Premium Quality: The Chuck body is made of quality steel. All guideways and bearing surfaces are precisely machined for better performance. It has high strength and toughness, compression resistance and durability, and long service life.

Self-Centering Chuck: Each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized. Round Claw Clamping Range: 1.5"/38 - 2.4"/62 mm. Round Claw Support Range: 1.9"/48 - 2.9"/74 mm.

Considerate Design: Chuck diameter: 4 inch / 100 mm compact structure is easy for you to carry, store and use. We give a universal adapter as a gift for kinds of countries to use, and the precise thread inside and texture outside make the whole looks more pretty.

- Our steady rest fits midi-sized lathes that are 12-inch swings. Easy setup, worked perfectly.

- This Steady Rest is 100% CNC cut for great accuracy. The wheels are made of Non-marring soft material, and it has a high strength to tightly hold the pieces.

- I used knobs on my steady Rest so you needn’t have used an Allen wrench.

Pro-Tek 23262 Supernova 2 Chuck Kit with 1-1/4" x 8tpi Insert Adapter

Rust resistant nickel plating

Pro-Tek 2″ jaws with dovetail and serrated inner face

PRODUCT INCLUDES: 3.75 Inch Chuck body, , Tightening Gear Key, T-Allen wrench, Screw chuck, Free Automatic Spring-Loaded Center Punch.

INTERNAL JAW CAPACITY: Internal jaws tighten around workpieces varying from 1-1/4 to 2-1/2 inches in size

EXTERNAL JAW CAPACITY: External jaws spread inside of workpieces with pilot holes ranging from 1-3/4 to 3-1/8 inches

Made of heavy cast iron

Machined bed matches the 70-220VSR lathe for easy sliding of the tailstock for long spindles

Both ends of the bed extension ends are machined for adding even more extensions to your lathe

Premium Quality: Chuck body made of quality steel. All guideways and bearing surfaces are precisely machined for better performance.

High Performance Jaws: Each jaw can be adjusted to center with superior gripping force, our set includes a high claw, a small round claw, a swallow tail claw and a tooth type ladder claw, this improves chuck flexibility, clamping most shaped workpieces can also be realized.

Precision Highly Polishing: With smooth surface, the lathe chuck is milled by pricing milling skill for high precision, accuracy and pretty appearance.

HIGH QUALITY: The K72-80 Lathe Chuck is 100% brand new and high quality, hardened and durable in use.

WHOLE SET: The package of this Lathe Chuck includes 1 x 4-Jaw Lathe Chuck, 1 x Hex wrench and 3 x Screws.

FEATURES: Each jaw of 4-Jaw Lathe Chuck is independently adjustable and reversible. The speed is 4000r/min. The chuck diameter is approx. 80mm / 3.15in.

Tapping capacity: M6-M36. Rotation speed:125rpm. Working area: horizontal 1180mm, vertical 400mm

Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials.

Standard equipped tap collet size: ISO standard M6-M8,M10,M12,M14,M16,M18-M20,M22,M24,M27-M30,M33 and M36. 11PCS in total. If you need JIS or DIN standard collet, please make note on the order or message me.

To arrange delivery, the trucking company needs a good phone number. Please ensure you provide a correct phone number at checkout to avoid delays in shipping or a cancellation of your order. This machine ships by freight truck due to its bulk and weight. Typically, truck orders ship 1-3 days after receiving an order, but actual ship date is dependent on freight carrier pick-up. If your delivery location will be difficult for a larger truck/semi-trailer, please let us know.

Overview - A full featured mini lathe with professional capabilities at an incredible price. An indispensable workhouse in workshops for many years and featuring a small footprint suitable for home, commercial and educational use. Ideal for all kinds of precision metal work including: turning, facing, grooving, parting, threading, drilling, boring, knurling, and tapping. A true metalworking tool for professional outcomes vs. a look-a-like toy.

Machine features - The LittleMachineShop.com exclusive version of this machine includes a Full 14" bed length with a cam-lock tailstock for longer work pieces, a 1/2 HP variable speed spindle motor (with spindle speeds from 100 - 3000 RPM) and 2 speed ranges for low speed torque, a digital spindle readout, Zero-settable hand wheels graduated in 0.001" on cross slide and compound rest, 4-way indexing tool post set for 5/16" (8 mm) tools, E-stop safety power switch, Rear apron shield, backsplash, and chuck guard.

Designed to fit Powermatic 4224B Woodworking Lathe

Adds 24" to the diameter of the workpiece when mounted down on the leg

Adds 20" to working distance between centers