Best Fanwayer Pressure Switches in 2026

24 10/100/1000M RJ45 ports

Supports MAC address self-learning and auto MDI/MDIX

Standard 19-inch rack-mountable steel case

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel High Round Pushbutton Switch; Voltage: 250V, 5A. Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Product Name : Water Level Sensor;Stainless steel Material;Contacts : NO+NC;Max Contact Rating : 10W Wire length:12inch, Max Breakdown Voltage: 110V AC/DC;

It does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperture can be used in any environment.

This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device,but need to be used with relay

[Parameter] - Modle: FS-1; Material: Iron; Rated voltage: 250V; Rated current: 10A; Contact: 1NO 1NC; Cable length: 1m

[Features]- The shell is made of flame retardant material, which is not easy to be damaged, the internal switch core is silver contact, anti-corrosion, internal thickened pressure spring, anti-oxidation square steel shaft, corrosion-resistant

[Function]- This foot switch is an instantaneous action, can be connected to push or push, can be used in industrial equipment and other fields that require foot switches. Keep pressing the pedal to turn on the device, and release the pedal to turn off the device

[Parameter] - Modle: FS-1; Material: Plastic; Rated voltage: 220V; Rated current: 10A; Contact: 1NO 1NC; Cable length: 0.1m

[Features]- The shell is made of flame retardant material, which is not easy to be damaged, the internal switch core is silver contact, anti-corrosion, internal thickened pressure spring, anti-oxidation square steel shaft, corrosion-resistant

[Function]- This foot switch is an instantaneous action, can be connected to push or push, can be used in industrial equipment and other fields that require foot switches. Keep pressing the pedal to turn on the device, and release the pedal to turn off the device

Light weight, small size, easy to install.Hall element is imported, water-proof design to prevent water ingress,The inside of the impeller is inlaid with a stainless steel shaft and is always wear-resistant.

All materials are in line with SGS testing standards.

Three wire connection: Red for positive, black for negative, yellow for pulse signal.

Light weight, small size, easy to install.Hall element is imported, water-proof design to prevent water ingress,The inside of the impeller is inlaid with a stainless steel shaft and is always wear-resistant.

All materials are in line with SGS testing standards.

Three wire connection: Red for positive, black for negative, yellow for pulse signal.

All-steel case and cover provides long lasting, rugged protection for internal components

Sight-set calibrated pressure adjustment displays a visible pressure scale, fully adjustable through the range without removing the cover (on NEMA 1 enclosure models)

Manual reset lockout option provides trip-free lockout that cannot be overridden or reset until pressure returns to specified level

Application: For industrial pressure control, pressure switch for most of industries, it is suitable for air, liquid, oil and any media which is not corrosive to stainless steel. Typical use including water pump, air compressor, automatic etc

3-1/8" Dial size, 1/4"NPT male, lower mount

Range: 0-230psi/16bar/1.6Mpa, cycle switch reading, LED display easy to read from distance

Applicable Scene: industrial equipment, home appliance switch, car modification, motorcycle modification, access control system.

The Working Pressure: between 5~14N,suitable for a large range of scenarios.

Two Type: 3 Pin And 2 Level:1 Normally On+1 Normally Off; 6 Pin And 3 Level:2 Normally On+2 Normally Off.

High-quality material: Made of high quality material, which is sturdy and has a long service life. A great choice for you

Easy to use: Adopting adjustable pressure working form, the pressure range is 0.1‑1.0 MPA, the operation is simple and convenient. You can use it with confidence

Stable connection: The male thread is clear, and the connection is stable and not easy to slip off. Bring you a new and different using feeling

【Fitment】1-1/2 to 3 hp rating for a compressor without a magnetic starter.

【Specs】The pre-set cut-in pressure is 95 psi and the cut-off pressure is 125 psi providing a 30 to 40 psi pressure differential.

【Premium Quality】This PRESSURE SWITCH is made from premium steel, rugged and high temperature resistant. Designed using state-of-the-art technology with the client in mind. It will meet your needs and provide excellent quality at an affordable cost. Easy Installation:

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 7/8''/22mm

22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

Max Switching Voltage : AC/DC220V; Max Switching Power : 50W; Float Ball Size : 26x26mm; Wire Length : 320mm; Screw : M11

The float switch can be installed at the top or bottom of the tank, depending on whether you want to detect water rising or falling.

Floating ball switch is a kind of liquid level control device with simple structure and convenient use. It has the advantages of small volume and long working life compared with general mechanical switch. When selecting the right material, any kind of liquid, pressure and temperature can be used.