Best Plastic Scroll Saws in 2026

2-1/2-inch cut capacity of the metal band saw cuts up to 2-inch SCH 40 pipe

Centered handle position of the portable band saw provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue

LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting of DEWALT band saw.

Powerful 6.5 amp motor of the jigsaw tool delivers the cutting power needed for the most demanding materials

Variable speed of the jig saw delivers 500 - 3,100 strokes per minute for optimal cutting speed for a variety of applications

Keyless, lever-action blade clamp for quick and easy blade changes

Portability: Compact size for ease of transportation and storage

Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate

Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets

[2 SAWS IN 1] Pivoting, push-button head turns your jigsaw into a reciprocating saw and back again in just seconds

[ORBITAL CUTTING] The slight circular motion is more efficient for most materials than the traditional back and forth stroke. Get the job done quicker, with less strain on your hands

[DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products

Huge cutting capacity makes cuts up to 5 inches wide and 5 inches deep

Variable speed operation adjusts the blade speed anywhere from 60 to 420 feet per minute

Powerful 10-amp motor glides through metal, plastics, and more

[SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

[CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts

[TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal

For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood

Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned

Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals

Huge Cutting Capacity: The cutting capacity of the band saw: without base: 4.7"x4.7" deep-cut capacity for rectangular stock, 5" capacity for round stock. With base: 3.9"x3.2" deep-cut for rectangular stock, 3.93" for round stock.

Powerful Motor: 1100W 10 amp powerful, pure copper motor, designed with controlled power to withstand any jobsite application. Cutting Speed: 137.8-472.4ft/min, provides quick and smooth cutting with no sparks and burrs.

Ergonomics Design: Superior balance allows for more accurate cuts. Ergonomic soft grip back handle provides comfort during use. The saw blade guard can be adjusted to avoid the saw blade from jamming and is safer without hurting your hands.

🚀±45⁰ Bevel Cutting & 4 Orbital Setting🚀: 45⁰ adjustment with 4 Orbital settings, fit into different angle and material cutting. More flexible and accurate for working.

🚀3000 SPM Power & 6 Various Speeds🚀:Powerful 4.5 Amp motor of jigsaw tool generates up to 3,000 spm of cutting power needed for the most materials. 6-bit variable speed allows you to control the cutting speed and accuracy, and handle various applications and materials with higher accuracy.

🚀Tool-free Blade Change & Dust Extraction🚀: Replace saw blades in a matter of seconds with the tool-free blade Clamp. This jig saw kit options to connect with vacuum cleaner. Clear sawdust by using the dust blower or connecting the dust port to a vacuum cleaner for clear sight of cutting line and neat working environment.

[GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts

[TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site

[ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, Carbon and Aluminum arrow shafts, and mini model making

High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel- no sanding required!

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, arrow shafts, and mini model making

✅RUSTPROOF AND DURABLE --- This product is an emergency wire saw, Mini stainless steel wire saw is made of quality stainless steel, which is anti-rust and durable.

✅RUSTPROOF AND DURABLE --- This product is an emergency wire saw, Mini stainless steel wire saw is made of quality stainless steel, which is anti-rust and durable.

✅EASY TO OPERATE --- With a chain saw and two ring handles, can easily cut object by holding the two handles and pull the saw forth and back.

This Mini Table Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, wood, plastic and other light materials.

This Benchtop Cut Off Miter Saw has adjustable miter gauge, perfect for all your DIY projects.

This precision bench saw makes perfect cuts in soft metals, wood and plastic in 1/10th the time it takes by hand.

【Adjustable Cut Depth】The height of the saw blade from the table top is adjustable, with a range of 0-0.59 inch. And this small table saw with a cut depth of 0-1/2 inch. We provide 4 commonly used circular saw blades, which can meet your basic cutting needs!

【Application】Suitable for PCB, Small wooden stick, Acrylic, Thin wood, Plastic, Model material cutting, Aluminum alloy, Iron and Stainless steel cutting, etc. With this small table saw you can easily make some small crafts, small woodworking projects!

【Convenient】It is a very tiny table saw, please check the machine size in the third picture (L x W x H) 7x5.5x3", weight 4.2 lbs, compact size, easy to carry and small space. Equipped with a transparent safety baffle, does not block your sight. It can perform 90° right-angle cutting and 45° bevel cutting.

Universal for both home and small business use band saw for cutting metal

1.5 horsepower motor pre-wired for 115V, can be rewired for 230V

Quick clamp vise can be rotated 0-45 degree

1. Light duty, easy to carry to any workplace

2. Angle cutting, 0-45°swivel bow head

3. Variable speed

Product 1: [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

Product 1: [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts

Product 1: [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal

【ADJUSTABLE CUT DEPTH】The height of the saw blade from the table top is adjustable, with a range of 0-0.55 inch. And this small table saw with a cut depth of 0-1/2 inch. We provide 3 commonly used circular saw blades, which can meet your basic cutting needs!

【APPLICATION】This mini hobby table saw is suitable for cutting DIY handicrafts, PCB board, basswood board, Plastic, Copper Clad Laminate, Acrylic, Thin wood board, Bamboo slice, wood chips, Chopsticks, small wooden sticks, etc. With this small portable table saw you can easily make some small crafts, small woodworking projects!

【PORTABLE】It is a very tiny table saw, please check the machine size in the second picture (L x W x H) 7.9x6.3x3.1", weight 5.5 lbs, compact size, easy to carry and small space. Equipped with a transparent safety baffle, does not block your sight. It can perform 90° right-angle cutting and 45° bevel cutting.

Rustproof and Durable: This is an emergency wire saw made of high-quality stainless steel, which is rustproof and durable.

Easy Cutting: Using a chain saw and two circular handles, you can easily cut objects by holding the two handles and pulling the saw back and forth.

Applicable Materials: Can be used to cut wood, plastic, bones, rubber and soft metals.

Same tools. New name. Hitachi power tools has renamed to Metabo HPT

Powerful motor- 15 Amps and 2, 000 watts to power through the toughest jobs

Portable and lightweight design facilitates maneuverability and ease of use of any worksite

ANTI RUST AND DURABLE: This emergency wire saw adopts anti rust and durable.stainless steel. Could use vegetable oil for maintenance.

FINGER HOLES FOR EASY HANDLING: This outdoor survival wire with finger holes for easy handling can easily cut object by holding the holes.

WIDE APPLICATION: Can be used for cutting wood, plastic, bone, rubber and soft metal. Easily cuts down small trees or branches

CIRC SAW 9" NXT

CIRC SAW 9" NXT

CIRC SAW 9" NXT

[High-quality materials] This product is an emergency wire saw, made of high-quality stainless steel, rust-proof and durable, and has a long service life.

[Simple to use] This stainless steel wire saw has a chain saw and two ring handles. When using it, you can easily cut objects by holding the two handles and pulling the saw back and forth.

[Has many uses] This stainless steel wire saw has sharp teeth and can be used to cut wood, plastic, bone, rubber and soft metals.

Micro-Make Super Value Packages Are An Economical Way To Expand Your Workshop Or Get Involved In A New Hobby.

Take our best-selling saw, add some of our most popular accessories for it, and what do you get? A versatile mini woodworking and metal cutting workstation like no other.

Package includes: MicroLux Tilt Arbor Table Saw, 40 Tooth Carbide Tip Saw, Taper Jig, Ripping Gauge Set, Featherboard and Fence Set Blade, Angle Setter/Protractor, Ferrous Cut-Off Disk, and Blank Blade Plates

Angle Cut: There are 0-90 degree cuts to help you work more conveniently. The machine adopts acrylic baffle, which does not block the line of sight and ensures easy operation under safe conditions.

Versatile functions: Our mini table saw is versatile and can be used for small wooden stick cutting, acrylic cutting, aluminum alloy cutting, model material cutting, plastic cutting, etc. Suitable for DIY craft workshop, creative research and development.

Precision Scale: The mini precision table saw adopts steel frame structure, which is of high quality and more durable. Maximum depth of cut is 1.3"/33 mm. Precise cuts ensure no fading and meet your high standards.

Powerful motor delivers fast, high speed up to 6000rpm/min, 16mm cutting depth, for efficient, easy cutting job.

0°-90° cutting angle adjustable, 7 rotating speeds adjustment, benefit to achieve precise and quick cut.

Backer and scale of tablesaw, used for safe, stable, accurate and straight cuts.

[Specifications] Equipped with high-speed motors. Motor speed: 10000RPM. Output speed: 1600-3300RPM. Stepless speed regulation power supply. Maximum diameter of saw blade: 110MM. Cutting depth: 30MM. Chuck range: 1.5-10MM. Flexible shaft chuck range: 0.3-4MM.

[Multifunctional] The three processing methods of cutting, engraving and polishing are combined, effective and easy to use. The package contains all the accessories in the picture!The English manual is in the last picture of lisiting, please contact our Amazon mailbox if you can’t read it clearly.

[High precision] In order to accommodate the different inner holes of the saw blade, the diameter of one side of the saw blade clamp is 0.79 inches, and the diameter of the other side is 0.63 inches. The jade cutting, engraving and polishing machine is equipped with a precise angle ruler and length measuring ruler. The operator can operate the machine according to the size requirements, and can clearly grasp the processing size.

Impeccable Cutting Proficiency: Are you ready to cut into an unbelievable experience? The woodworking bandsaw can cut wood with a maximum cutting height of 6 inches. Max. Throat Width: 9.65 in / 245 mm, Sawblade Length: 72.13 in / 1832 mm, Max.Sawblade Speed: 890 m/min±10%.

Two-speed Adjustable: The benchtop band saw comes with a high-performance motor that can deliver a powerful 1/2 HP 370W output while providing overheat protection for added security. The benchtop band saw features an 1100 RPM maximum speed and 560 RPM minimum speed, accommodating their specific needs.

Multi-angle Cutting: The wood bandsaw features a tilting table that can be adjusted from 0 to 45°, allowing for more flexibility when cutting. The sawtable size is 13.39 x 13.19 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease.

Product 1: Parallel-arm design combined with heavy duty steel construction limit vibration and reduces noise

Product 1: Spacious 25-5/8-by-16-inch steel table bevels up to 45 degrees to the left and 30 degrees to the right

Product 1: Dual side panels flip open for easy-access tool-free blade changes