Best A Abigail Sensors in 2026

Type: K Type; Measuring Range: 32~1112°F (0~600°C)

Probe Material:304 Stainless steel; Terminal: 2 Insulated forks; Thread: 2 Meters

Probe size：6mmx100mm/0.23“x3.9“（D * L），Thread ：NPT 1/2"

Grounded thermocouple thermistor . The K thermocouple temperature sensor is waterproof . This is a water tight sensor probe

The K type temperature sensor probe temperature range is 0~500℃ ( 932 Fahrenheit ) . Accuracy : 0.2 .

This K temperature sensor is rustproof , it is made from stainless steel . Water proof Insulation Lead

High Temperature K-type Thermocouple with ceramic tube insulation

Continuous use up to 2372 °F or 1300 °C, NOTE: Thermometer displays only up to 1999 degreeF, but 1300 °C

Total length 8.5 inch, insulated length 6.5 inch

Type K Pipe Clamp Temperature Lead Probe

Operating temperature: -40°C to 200°C / 392°F

Clamp Jaw Opening: 1 3/8-Inch (6.5 cm) , Length of Cord: 40-Inch (102 cm)

100PSI PRESSURE TRANSDUCER - Convert the physical parameters of the gas , liquid and other physical parameters of the pressure sensor into a standard electrical signal.

WIDE APPLICATION - Plug and play for fuel, oil, air, water pressure inputs, can be used in oil tank, gas tank, etc.

PREMIUM MATERIAL - Made from top grade 316 stainless steel & high temperature resistant plastic, endure all kinds of working environment.

♥This is a high quality temperature sensor.The proble is solid,and can not be bent easily.

♥Durable wire can withstand high temperature

♥The high quality material Platinum is rustproof . Cable: 78.7 inch ( 2m ) metal braided line . The wire is made of shielded fiber glass wire ,thr wire can withstand 600℃ high temperature . It is compesation wire with shield feature . Much better than Teflon .

High Temperature K-type Thermocouple Pyrometer with ceramic tube insulation

Continuous use up to 2498 °F or 1370 °C, NOTE: Thermometer displays the full range to 2500 degreeF and 1370 °C

Total length 8.5 inch, insulated length 6.5 inch

High Temperature K-type Thermocouple with ceramic tube insulation

Temperature Range: -328 to 2498 °F (-200 to 1370 °C), Class 1 or Select Grade K-type Thermocouple wire

Very thick AWG8 (3.2 mm) Thermocouple Wire, Total length 18.5 inch, insulated length 16.5 inch

Parameter information: power supply: 3.0V - 5.5V; Adjustable resolution: 9 - 12 bit; Temperature range: -55 ℃ to +125 ℃; Output : red (VCC), yellow (DATA), black (GND)

What you get: you will get 4 DS18B20 temperature sensors, 4 adapter modules and 4 female to female jumper wires; The adapter module has a pull-up resistor, which can be directly connected to the GPIO for Raspberry Pi without an external resistor

DS18B20 temperature sensor: the size of stainless steel housing is approx. 6 x 50 mm/ 0.2 x 2 inch, and the digital temperature thermal cable has a total length of approx. 1 m/ 39.4 inch, which is long enough to meet your needs

the external diameter of the pipe is 7mm

What You Will Get: the package contains 3 pieces of k type thermocouple sensors, sufficient quantities to meet your daily needs and replacements

Measurement Range: the temperature sensing line of the thermocouple sensor with a measurement range of 32-932 °F (0 - 500 °C); Probe sensor can be activated in 5 seconds, and the interface form is a flat plug in (also flat male connector); Up to 4 thermocouples can be connected, and you can take readings from 4 points concurrently

Versatile Uses: the temperature probes sensors can be applied for general purpose temperature applications, fast responding and suitable for contacting point and solid object temperature measurements; They allow thermocouples to be formed and bent, so you don't have to worry about the risk of cracking; Made of glass fiber, the type K probe sensors feature good insulation and heat resistance

J-Type Wire Thermocouple - Temperature Sensor Probe

Reads -292 to 752 degree Fahrenheit F or -180 to 400 degree Celsius

Length: 6 ft ( 74 inch), 190 cm, braided fiberglass insulation

500mm length（about 20 inches ）

0.25%FS linearity,0-5K ohm Output

position sensor with 24DC supply

K-Type Thermocouple Wire - Temperature Sensor Probe , Set of 5

Temperature Range: -58 to 500°F / -50 to 260°C

Length 37 inch, 96 cm, brown high temperature plastic insulation

FSR402 single-zone fore sensoring resistor with 0-10kg force measuring range

Force sensing resistor can sense applied force on sensing area in the range of 0g-10kg

Varies its resistance depending on how much pressure is being applied to the sensing area, the larger the force, the lower the resistance

[Parameter]: Working voltage: 3.3V;Humidity 0%-100%;Air pressure 300-1100hPa (hPa);Temperature -40°C-85°C; Current consumption 1.8uA @1Hz humidity and temperature;2.8uA @1Hz pressure and temperature;3.6uA @1Hz humidity, pressure and temperature; 0.1uA in sleep mode

[Highlight]: Work with Adafruit BME280 library perfectly; If accuracy is a priority, don't waste time with DHTxx series; with BME280, you get incredibly accurate temperature and humidity and pressure, please keep the cable very short to get accurate readings (as in inches not feet); with a low altitude noise of 0.25m

[Interface]: Digital interface I2C (up to 3.4MHz) and SPI (3 and 4 wire, up to 10MHz); For simple easy wiring, go with I2C

4-in-1 BME680 gas sensor. Monitor indoor air quality. Qwiic enabled for easy prototyping. No soldering required. I2C Addresses: 0x77 (Default) or 0x76

Operating voltage range: 1.71V - 3.6V. Typically 3.3V if using the Qwiic cable. Typical current consumption (varies based on mode and active sensor). Base: 2.1µA to 18mA. 0.15 µA (sleep mode)

Relative humidity: Operating range: 0% to 100%. Absolute Accuracy: ±3%RH. Resolution: ±0.008%RH.

K-type Thermocouple Surface Temperature Probe

90 Degree-Angle Surface Probe, 6 inch long

Temperature range: -310 to 932°F (-190 to 500°C)

High Temperature K-type thermocouple probe, stainless steel

19 inch (50 cm) long insertion probe, 0.14 inch (3.5 mm) diameter

Miniature k-type connector works with most k type thermometers

Thermocouple is commonly used in temperature measuring instruments. It can directly measure temperature and convert the temperature signal into thermal electromotive force signal. It is usually used in conjunction with display instruments, recording instruments and electronic regulators.

Wire Length: 1.5M / 5ft; Pitch: 1.25mm / 0.05 inch; Probe Size: M8 x 5 x 100mm; Temperature Range: 0-600 °C; In the package of: 1 x K Type Thermocouple

Made of stainless steel, it will not rust easily, and it can withstand high temperature and corrosion. Durable enough to be an assisting tool for your temperature measurement project. It has simple structure, wide measurement range, high precision and is very convenient to use.

Thermocouple is commonly used in temperature measuring instruments. It can directly measure temperature and convert the temperature signal into thermal electromotive force signal. It is usually used in conjunction with display instruments, recording instruments and electronic regulators.

Wire Length: 300cm / 10ft; Pitch: 1.25mm / 0.05 inch; Probe Size: M8 x 5 x 50mm; Temperature Range: 0-600 °C; In the package of: 1 x K Type Thermocouple

Made of stainless steel, it will not rust easily, and it can withstand high temperature and corrosion. Durable enough to be an assisting tool for your temperature measurement project. It has simple structure, wide measurement range, high precision and is very convenient to use.

【Stable performance】 The probe adopts DS18B20 sensor chip, and the collected temperature signal can be directly converted into digital signal for equipment processing

【Good sealing performance】: Sealant with high thermal conductivity is used to encapsulate, ensuring the high sensitivity of the temperature sensor. The cable has strong anti-interference, and is suitable for on-site temperature measurement in harsh environments. (Lead can only withstand a temperature of about 85 ℃. Please pay attention when using)

【DS18B20 temperature sensor]】: The total length of this digital temperature thermal cable is 5m/197 inches, the stainless steel shell is 6 x 50 mm, and the length is long enough for you to use