Best Dewalt Table Saw Blades in 2026

For fast rip cuts on soft/hardwood thanks to the thin kerf design.

To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. Good on plywood.

0.102 kerf thickness, 0.071 plate thickness, 10° Hook Angle, alternate teeth Grind.

For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance.

Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws.

0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 4/20° alternate teeth Grind.

For fast crosscuts on wood and plywood. Good rip cut on wood.

To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood.

0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind.

10" diameter, 5/8" bore

Teeth: 24 FLAT Kerf: 0.126”

Machine Use: Chop Miter & Table Saw

For making clean edges, square shoulders & flat bottoms. Splinter-resistant cuts in all wood.

Ideal for underpowered saws.

0.125 kerf thickness, 0.098 plate thickness, -12° hook angle, Flat Tooth + Alternate Tooth.

3-Inch Diameter, 5/8-Inch Bore, suitable for 8-Inch saw blades.

2 stabilizers that virtually eliminates rim vibration to make cleaner, straighter cuts.

They also reduce noise caused by vibrations and extend your saw blade life.

Delivers splinter-resistant cuts in all wood, plywood and wood composites.

Ideal for underpowered saws.

0.125 kerf thickness, 0.098 plate thickness, -5° hook angle, Flat Tooth + Alternate Tooth Grind.

Heavy-duty cutting, smooth finish with no melting. For radial arm saws, miter/table, special saws.

Cut thin plastic, phenolic, plexiglass, vinyl, laminate flooring and plywood.

0.110 kerf thickness, 0.087 plate thickness, -3° hook angle, Alternate top bevel with chamfer grind.

For fast rip and crosscuts. Excellent cut on plywood, soft and hardwood.

To be used on radial arm saws, miter saws, table saws.

0.102 kerf thickness, 0.071 plate thickness, 18° cutting angle, 10° ATB+Shear grind.

For fast extra-clean crosscuts & occasional rip cuts. Excellent cut on plywood, great cut on wood.

Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood.

0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 10° ATB+Shear grind.

Legend: D = Diameter (inches and/or mm) T = Tooth Count B = Bore (inches or mm) K = Tooth Thickness (inches) P = Blade Thickness (inches)

High Quality Saw Blades for Accurate and Precise Cuts

Steel Plate of Blades are Laser Cut then Polished and Tensioned

For heavy-duty cutting on aluminum, brass, copper, PVC and non-ferrous metals. Excellent on thin-walled, good on thick-walled extrusions.

To be used on radial arm saws, miter saws, table and special saws.

Micrograin carbide cutting edges to guarantee high performance on non-ferrous metals, PVC and melamine.

Model number: 285.650.10

Applications: rip and crosscuts with large gullets allowing deep cuts and effective chip clearance Machines: radial arm saw, miter saw, table and special saws Material: soft and hardwoods plywood and chipboard

Finish quality: “Excellent” for ripping and crosscutting wood and plywood

For fine finishing crosscuts & occasional rip cuts. To be used on portable benchtop and table saws.

Heavy duty steel plate & thin-kerf blade for faster and precise cuts on softwood/hardwood, plywood.

0.084 kerf thickness, 0.063 plate thickness, 15° hook angle,10° ATB grind.

For fast cutting through iron, steel pipe, metal rods and sheet metal. Suggested RPM: 3000~5900

For low RPM metal chop saws, such as Jepson. Cut iron, steel pipes, metal rods, sheet metals.

0.087 kerf thickness, 0.071 plate thickness, 0° hook angle, 8° Flat teeth & alternate chamfer Grind.

For rip and crosscuts with exceptional finish. Excellent rip and crosscut on wood. Good on plywood.

To be used on adial arm saws, miter saws, table and special saws.

0.126 kerf thickness, 0.098 plate thickness, 18° hook angle, 20° Alternate Top Bevel Grind.