Best Spst Toggle Switches in 2026

Heavy Duty 2 HP 20/15A 125/277V AC

Lead Wires up to 12” in Length !

Sturdily Constructed Body, ½” Panel Opening

Perfect for industrial equipment or emergency lighting

Specifications: 10 A 277 V AC / 20 A 125 V AC

75°C max. temperature rating

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

【SPST 2 Pin ON/OFF Switch】 - You can toggle the handle manually to ON or OFF position, very flexible to handle.

【Waterproof Boot Cap】 - Bonus weather resistant rubber cap included, no worry about moisture and dust entering in.

【Easy to Use】 - Simply put the rubber cap into the handle, turn clockwise, all done. 2 pole switch, red positive, the standard "hot" wire, black is negative. Perfect for a boat, yacht, vessels and other marine.

Designed to connect and disconnect an DC12V 20A electrical circuit at will,SPST:ON-OFF 2 pole；LED Color：Blue，Red，Yellow，Green；Type:2 Pins (3 Pins with LED)

When the switch is on, The LED lights will come on；Hole diameter：20mm/0.8"；And it comes with a keyhole slot to prevent unwanted rotation；Pre-wired design:Easy to install, and saves unnecessary cost. Wire length: 200mm/ 7.8"

Coppery pin is connected to the battery negative pole,the next pin is connected to the battery positive pole,the last one is connected to the equipment positive pole

★Product Name: Toggle Switch

★Pin Number : 3 pins; position: 2 position(on/on)

★Mounting aperture: 6mm. Total Size (Approx.): 3.5 x 1.2 x 0.7cm / 1.4" x 0.5" x 0.3"

Package Content: 8Pcs x SPST Mini Miniature Toggle Switch; 2 terminals made of high quality industrial materials, Wear-resistant and durable, very easy to be soldered; Every nut and thread are meticulously crafted;

Mounting hole diameter: 6mm / 0.23" ; Total Size(Approx) : 13 x 7 x 32mm/0.5" x 0.3" x1.3"(L*W*H);

Pin Number : 2 Pins; Position : 2 Positions(ON/OFF);Type : SPST(Single Pole Single Throw);Power: 6A 125VAC / 3A 250VAC

Connector type: SPST, 2 terminal pin on/off. Rating: 12V-20A/2 Pole

Safety cover: Red "aircraft" safety cover prevents accidental start

Easy to use and install: Open the red cover, toggle the switch to "on". Close the red cover to off the switch directly. Mounting hole diameter: 12mm. Each of the terminals has a machine screw for quick connections, but also easy to be soldered.

Features: This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety. Equipped with output short circuit, overload & polarity reverse protection. Up to 10000 times of ON/OFF operating life span

Perfect Design: Designed to connect and disconnect a DC 12V 30A electrical circuit at will, SPST:(single pole single throw), ON-OFF control; 2 pole design (On/Off), 3rd poles with LED to be connected to earth. LED on the switch will illuminate when the switch is turned on.

Widely Used: The 12v rocker switch mainly be used in car, ATV, UTV, SUV, wrangler, RV, off road vehicle, truck, boat, yacht & electronics modification, etc. Available for upgrading most wiring harnesses to control LED light bar, LED work lights, fog lamps, headlights, taillights & auxiliary lamps, etc

Product Name: Toggle switch; Country of Manufacture: CHINA;The rocker toggle switch panel is made of high quality aluminum panel and ABS material, which is durable and waterproof

Type: ON/OFF ; Connector type: SPST, 2 terminal pin ; Rated Voltage & Current : 16A 250V AC

Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles,Total Size(Approx) : 30x15x52mm/ 1.2" x 0.58" x2"(L*W*H)；Metal panel size：95x65mm//3.7"x2.5"

[Round Rocker Switch]: "IO" marked on black button 12V Rocker Switch, it uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety.

[Mounting Hole Size]: Our mounting hole size of this 12V Rocker Switch on off is 20mm/0.79 inch. Wire length: 200mm/ 7.85 inch.

[Product Features]: Poles: SPST, Terminals: 2 Pins, Position: 2 Position(On/Off), (This switch can use 12V) Pre-wired design: Easy to install, and saves unnecessary cost.