Best Malida Tube Fittings in 2026

【Package Includes】: Pex Fittings Set includes 25pcs 1/2" PEX Elbows

【Non-Pollution】: Lead free brass pex fittings, comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified

【Extra-Long Service Life】: High-quality brass pex 90 degree elbow set resists corrosion, rust and high temperature (32℉—200℉).

90-degree elbow for connecting flexible polyethylene tubing to pipe at an angle

Barbed male insert on one end and male NPT threads on the other end for connecting flexible tubing to female NPT threaded pipe

PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal

90-degree elbow for connecting flexible polyethylene tubing to pipe at an angle

Barbed male insert on one end and male NPT threads on the other end for connecting flexible tubing to female NPT threaded pipe

PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal

90-degree elbow for connecting two pipes or tubes at an angle

45-degree flare connection on one end and an NPT female connection on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Material: Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability

Widely Used: Widely Used In The Fuel/Air/Lquid/Oil/Gas/Vacuum Lines

Features: Good Airtightness, Pressure Resistance, Not Easy To Trip,NPT thread size does not actual diameter, it is only nominal pipe size.

EZ-FLUID Plumbing Lead Free Copper 90 Degree Elbow C x C Copper Fittings

Copper 90 Degree Elbow Copper Fitting with Sweat X Sweat connection Works on Type M,L or K Copper Tubing

Copper Pipe Elbow Fittings Made of Lead Free Copper

Adapter for connecting pipes or fittings of different types

Connects to a hose on both ends

Sanitary 90 degree elbow hose barb pipe fitting for a tight seal on hoses when used with a hose clamp (not included)

Made of high-quality plastics and nickel-plated copper for durable use

Type: Quick Connect Fitting Connector

Advantages: Easy installation and disassembly, good sealing performance

90-degree elbow for connecting two tubes at an angle

Female compression tube fitting for connecting to male threaded pipes

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Three piece construction - nut, sleeve and body.

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Stainless steel 316 marine grade material

90 degree elbow

Works with 2-inch OD [16 Gauge] foot rail tubing

👉【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use.

👉【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4".

👉【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on.

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Package Weight : 0.2 Pounds

Package Dimensions :0.5 Cm L X 6.4 Cm W X 7.4 Cm H

Unit Count: 1.0

Three piece construction - nut, sleeve and body.

USE WITH COPPER TUBING, BRASS TUBING, ALUMINUM TUBING AND PLASTIC TUBING ONLY. Not for use on pipe.

Standard fittings use short nuts

Three piece construction - nut, sleeve and body with attached insert

Use with copper, brass, aluminum, or plastic tubing

Standard fittings use short nuts

Joins 1/2" NPT male pipe or fittings at a 90-degree angle

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

90-degree elbow for connecting tubing to threaded pipe at an angle

Working Pressure: 2900psi / 20MPa;Temperature Range: -50-450℃ / -58℉ -842℉

Type 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation

TOP QUALITY: The water line barbed hose connector fittings are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability

MEASUREMENTS: 3/4 Inch Barbed Insert x 3/4 Inch FNPT thread. The Pipe Fitting Length is 2.94 inch. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max. pressure 280 psi @73 Degrees FHose Fitting Connection Type is Insert x FNPT

WIDE APPLICATION: PVC 90 degree elbow barb fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems

Size: Tube OD 1/4"; Ferrule Inner Dia : 1/4".

90-degree elbow for connecting tubing to threaded pipe at an angle.

Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications.

Color: Golden; Material: Brass; Thread: G1/2 Male x M14*1.5 Male; Hole Dia: 8mmx14mm/0.31x0.55inch(ID*OD), suitable for connecting 8mm(OD) copper pipe; Total Size: 39x30x21mm/1.54x1.18x0.83inch(L*W); Packing List: 2 x Brass Pipe Tube Adapter

Advantage:The tube coupler is made of brass, it is durable and reusable.; tube fitting comes with brass connector, brass sleeve, and nuts in one set, which allows you to connect pipe easily.

Instruction:1. Insert the copper pipe with the corresponding diameter into the brass nut, and slide the brass sleeve up to the nut on its threaded side. ; 2. Put the tubing into the connector, and install and fix the pipe to the brass connector with a spanner.

Color: Golden; Material: Brass; Thread: G1/2 Male x M18*1.5 Male; Hole Dia: 12mmx18mm/0.47x0.71inch(ID*OD), suitable for connecting 12mm(OD) copper pipe; Total Size: 41x35.5x22mm/1.61x1.4x0.87inch(L*W); Packing List: 1 x Brass Pipe Tube Adapter

Advantage:The tube coupler is made of brass, it is durable and reusable.; tube fitting comes with brass connector, brass sleeve, and nuts in one set, which allows you to connect pipe easily.

Instruction:1. Insert the copper pipe with the corresponding diameter into the brass nut, and slide the brass sleeve up to the nut on its threaded side. ; 2. Put the tubing into the connector, and install and fix the pipe to the brass connector with a spanner.

Color: Golden; Material: Brass; Thread: G3/8 Male x M12*1.25 Male; Hole Dia: 6mmx12mm/0.24x0.47inch(ID*OD), suitable for connecting 6mm(OD) copper pipe; Total Size: 35.5x29x17mm/1.4x1.14x0.67inch(L*W); Packing List: 2 x Brass Pipe Tube Adapter

Advantage:The tube coupler is made of brass, it is durable and reusable.; tube fitting comes with brass connector, brass sleeve, and nuts in one set, which allows you to connect pipe easily.

Instruction:1. Insert the copper pipe with the corresponding diameter into the brass nut, and slide the brass sleeve up to the nut on its threaded side. ; 2. Put the tubing into the connector, and install and fix the pipe to the brass connector with a spanner.