Best Malida Tube Fittings in 2026

Adapts 1/4" NPT male end to 1/4" tube size female end at a 90-degree angle

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

【Package Includes】: Pex Fittings Set includes 25pcs 1/2" PEX Elbows

【Non-Pollution】: Lead free brass pex fittings, comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified

【Extra-Long Service Life】: High-quality brass pex 90 degree elbow set resists corrosion, rust and high temperature (32℉—200℉).

PEX Kit includes 10 - 1/2 Inch PEX Elbows 90s, 10 -1/2 PEX Inch Tees, 10 – 1/2 Inch Straights Couplers

Made from Lead Free brass which means you can use on potable domestic water lines (washer, sink, shower, etc..) and for radiant heating applications. Highly dezincification resistant or corrosion due to high quality brass. Universal Plumbing Code compliant with AB1953

Easy to install, only need a Crimp/Cinch tool, PEX ring, PEX fitting and PEX pipe. View video for instructions. No glue, flames, solder or bonding agents. Easy installation for potable and radiant applications.

★ Lead-free Brass,meets California AB-1953, Vermont, and new federal standards for low lead applications. Can gurantee your family health and safe on potable and non-potable water.Applicable in residential and commercial usage.

★ Inlet 3/8" OD female COMP x 3/8" OD COMP outlet x 3/8" OD COMP outlet . Angle stop add-a Tee-type is fit your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, second faucet and Supply Lines.This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways.

★ Resists corrosion and mineral buildup, rust, and freeze damage.Have a longer using life than iron and iron galvanized products.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.

✔️【 Lead Free Non-Pollution Compliant Brass 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Suitable for new or retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【Compatibility & Applications 】: Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube. COMPATIBLE with ONLY Crimp or Cinch Type rings and/or connectors. NOT Compatible with: -Expander Fitting System, Uponor/Wirsbo Expander System. This brass crimp fitting can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

Half union for connecting and disconnecting two tubes more easily than with a coupling

45-degree flare head tube connection on one side and a male NPT connection on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Type: Compression Union

Tube Size:3/8" OD

Materies: BRASS

JIC -6 AN male thread (9/16-18) to 3/8" tube hardline connector with 3/8 ID brass insert

Constructed of 6061 T6 aircraft grade lightweight aluminum material

Black anodized finish

Equipped with a 1/2 inch Crimp PEX inlet and 1/4 inch OD compression outlet connections

The Snap-on faceplate dimensions are 6-1/2 inch x 5 inch; The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch

The box with one-piece box-and-flange design, no additional support framing required

【Package Includes】: 1/2" Pex Fittings Set includes 4pcs PEX 1/2" x 1/2" Female NPT Drop Ear Elbow

【Non-Pollution】: Lead free brass pex drop ear elbow 1/2", comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified.

【Extra-Long Service Life】: High-quality brass pex fittings, resists corrosion, rust and high temperature (32℉—200℉).

Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines; Please confirm the size of the details according to the picture before purchasing

Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance

You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings

What you will receive: there are a total of 2 pieces fitting adapters, and equipped with 2 pieces brass inserts in the package, adequate quantity can meet your daily use and replacement demands, which can replace the broken one or old one, and you can share with your close friends, family members, colleagues and people who need them

Sturdy material: these fuel fittings are made of quality aluminium alloy, firm and solid, will not break or deform easily, with metallic luster, can keep bright after long term use, the surface and edge are polished carefully, skillful workmanship makes them smooth to touch, do not worry they will scratch your hands or cars while using, not easy to wear and tear

Size details: this fuel line adapter fitting is measured approx. 1.77 inches in length and 0.59 inch in width, appropriate in size and light in weight, convenient for you to use and store; And which is 6 AN to 3/ 8 inch, the thread size of the 6 AN is 9/ 16 UNF, and it fits to 3/ 8 inch OD hardline, please measure before purchase

Tee – Full slip tee sweats in-line on 1/2" CTS near problem valve or fixture

Tee – Hose tee arresters install on washing machine supply valves or directly to washing machine

Arrester body: 304 stainless steel - Piston: polypropylene with two EPDM o-rings - Tee body: UNS C36000 machined brass

Type:Push In Male Connector. Size:1/4” od tubing 1/4”NPT. Weight:18.5g od tubing air fitting quick release air line fittings

Fluid Admitted:Air, Vacuum, air fittings (No Freezing)

Working Pressure:0-1.0mpa | 0-150psi. Proof Pressure:1.5.Mpa | 150 psi push fittings tube coupler airline quick connect

Made of high-quality plastics and brass for durable use

Type: Quick Connect Fitting Connector

Advantages: Easy installation and disassembly, good sealing performance

【Lead Free Brass】: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet.

【Wildely Used】: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc.

【Durable】: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products.

PACKAGE INCLUDE -Part 1: MuHize upgraded 16 Fittings for 3/16”Brake Line: ① 2 x 3/16” (7/16-24) Inverted Tube Nut; ② 10 x 3/16" (3/8-24) Inverted Tube Nut; ③ 2 x 3/16” (1/2-20) Inverted Tube Nut; ④ 2 x 3/16"(9/16-18) Inverted Tube Nut;

PACKAGE INCLUDE - Part 2: MuHize upgraded 16 Fittings for 1/4”Brake Line: ① 2 x 1/4”(7/16-24) Inverted Tube Nut; ② 10 x 1/4” (7/16-24) Inverted Tube Nut (Long); ③ 2 x 1/4”(9/16-18) Inverted Tube Nut; ④ 2 x 1/4”(1/2-20) Inverted Tube Nut; Note：The nut threads are regular 1/4 inch tube fitting size. Please check before shopping!

HIGHER QUALITY - MuHize brake line fittings are made of durable material with unique rust corrosion proofing technology.

Hex plug with SAE 45-degree flare male end terminates tube size fitting

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

✅MEASUREMENT- The gas ball valve is equipped with a 1/2 inch flare x 1/2 inch female inlet pipe (FIP) threaded connection.

✅QUALITY- The straight-flare gas ball valve is constructed of high-impact, durable brass to provide a strong and long-lasting performance. The working pressure is up to 175 PSI. A working temperature range of 32 degrees Fahrenheit to 125 degrees Fahrenheit is recommended for product safety.

✅FUNCTIONALITY- Designed for use with liquefied petroleum gas, LP gas, and air mixtures.

3/8-24 Threads (standard 3/16" tube fitting size)

702x3 Weatherhead

Includes Mounting Bracket

Type:1/2" Od x 3/8" NPT Male Push to Connect Fittings; Body Style: Male Straight

1/2 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing)

3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

Body Style: Male Straight / Size:3/8"OD x 1/4" NPT Straight Union Connector

Fluid Type:Air Vacuum,water,oil (no freezing)

Working Pressure:0-1.0MPa | 0-145psi/Applicable Tube:PU / PA / PE / PVC

Hex bushing for connecting two pipes with different diameters

Size: Standard 3/8 inch NPT male to 1/4 inch NPT female.

Heavy-duty brass construction with rust proof, Easy to connect.

Tee fitting for connecting and branching pipes in a range of fluid transfer applications

1/2" female NPT threads on each end for connecting pipes with male-threaded ends

CA360 brass for strength and resistance to corrosion

Type:1/4" Od x 1/8" NPT Thread Push to Connect Fittings; Body Style: Female Straight

1/4 inch Air line Fittings Fluid Admitted: Air, Water (No Freezing)

1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

1/4 Union Straight Push to connect fittings Fluid Admitted: Air, Water, Steam ;Pressure: 2MPa | 290psi/ Applicable: Pipe PU/NYLON/Soft PE; Working Temperature:-20°C—120°C | -4°F—248°F

1/4 Push connectors Nickel Plated Brass - corrosion resistance, ductility at high temperatures, and low magnetic permeability; Seal: O-ring FKM(Viton)

These 1/4 quick connect fittings work great ,available in various styles and models ,good to suit your pneumatic piping needs perfectly, easy to connect and disconnect, a quick fix to your leaking problems.

★ 【Material】: Made of premium solid brass with a longer service life, stronger and more durable than iron and iron galvanized pipe fittings.

★ 【Advantage】: The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety.

★ 【Application】: LP and natural gas, flammable liquids (special order), instrumental, refrigeration. power steering, hydraulic and pneumatic systems.Not for use in potable Drinking water applications.

Freeze proof silcock pipe that is frost free

Brass body with chrome plated finish

Large plastic valve for easy to turn operation

Use to transition from iron pipe size PVC pipe to copper tube size copper, pex, or PVC, or pe-rt

White collar fits sch. 40, 80 and 120 PVC pipe and sch. 40 and sch. 80 cvpc

Male pipe thread (mnpt) fits female pipe thread (fnpt) connections

Made of high-quality plastics and nickel-plated copper for durable use

Type: Quick Connect Fitting Connector

Advantages: Easy installation and disassembly, good sealing performance