Best Malida Tube Fittings in 2026

PEX Kit includes 10 - 1/2 Inch PEX Elbows 90s, 10 -1/2 PEX Inch Tees, 10 – 1/2 Inch Straights Couplers

Made from Lead Free brass which means you can use on potable domestic water lines (washer, sink, shower, etc..) and for radiant heating applications. Highly dezincification resistant or corrosion due to high quality brass. Universal Plumbing Code compliant with AB1953

Easy to install, only need a Crimp/Cinch tool, PEX ring, PEX fitting and PEX pipe. View video for instructions. No glue, flames, solder or bonding agents. Easy installation for potable and radiant applications.

No tools required,Push fit fittings

Easy to use,Mini quick connect push tee 1/4-Inch OD

Push fit fittings,Quick Connect Fitting 1/4" RO Water System

Size: 1/4 inch OD Tube , Length: 32 feet (10meters),+ Package contains: straight jion 2pcs,Elbow jions 2pcs,tee 2pcs,Y Type 2pcs, shut off valve 2pcs

Non-toxic ingredients,Odorless and tasteless

Fits all water purifiers systems

★ Lead-free Brass,meets California AB-1953, Vermont, and new federal standards for low lead applications. Can gurantee your family health and safe on potable and non-potable water.Applicable in residential and commercial usage.

★ Inlet 3/8" OD female COMP x 3/8" OD COMP outlet x 3/8" OD COMP outlet . Angle stop add-a Tee-type is fit your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, second faucet and Supply Lines.This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways.

★ Resists corrosion and mineral buildup, rust, and freeze damage.Have a longer using life than iron and iron galvanized products.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.

✔️【 Lead Free Non-Pollution Compliant Brass 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Suitable for new or retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【Compatibility & Applications 】: Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube. COMPATIBLE with ONLY Crimp or Cinch Type rings and/or connectors. NOT Compatible with: -Expander Fitting System, Uponor/Wirsbo Expander System. This brass crimp fitting can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

DIY AIR SYSTEM - Hromee compressed air outlet kit allow you to design and install your own pressurized air system. No more dragging the compressor and reconnecting air hose. It helps you keep the working room clean and ordered.

PU AIR TUBING - Length: 32.8 Feet (10M); Outer Diameter: 1/4” (6.35mm); Inner Diameter: 4.15mm. Max Working Pressure: 120 PSI; Bursting Pressure: 360 PSI. Working Temperature: -4℉- 149℉. PU material provides the high flexible and oil resistant.

CONNECTORS - All the connectors are designed push to connect that is easy to remove and offering good sealing. The kit includes 2 Splitters, 2 Elbows, 2 Tees and 2 Unions. 4 male straight fittings fit 1/4" Tube OD and with 1/4" NPT Thread. The thread need to be seal taped to avoid leakage.

Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8x24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter

Material: SUS304 Stainless Steel

Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application

Tee with three openings for connecting and branching three pipes

Fitting connects to tubing on all three, flared ends

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Tee – Full slip tee sweats in-line on 1/2" CTS near problem valve or fixture

Tee – Hose tee arresters install on washing machine supply valves or directly to washing machine

Arrester body: 304 stainless steel - Piston: polypropylene with two EPDM o-rings - Tee body: UNS C36000 machined brass

No tools required,Push fit fittings

1/4 inch quick connector,valve 2pcs +Tee Union 2pcs +Elbow Union 2pcs +Straight Union 2pcs + Y Type 2pcs.

1/4 inch OD Water Filter Tube, Length 10 Meters.

pneumatic fitting 8mm : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings

Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings

Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly

【Lead Free Brass】: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet.

【Wildely Used】: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc.

【Durable】: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products.

No tools required,Push fit fittings

Easy to use,Mini quick connect push tee 1/4-Inch OD

Push fit fittings,Quick Connect Fitting 1/4" RO Water System

3/8-24 Threads (standard 3/16" tube fitting size)

702x3 Weatherhead

Includes Mounting Bracket

Push fit fittings,Quick Connect Fitting 1/4" RO Water System

Standard fitting for water filter systems using 6mm water filter tubing

No tools required,Push fit fittings

Tee fitting for connecting and branching pipes in a range of fluid transfer applications

1/2" female NPT threads on each end for connecting pipes with male-threaded ends

CA360 brass for strength and resistance to corrosion

What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY); Different styles can suit different pneumatic piping needs

Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection; The sealing element has good sealing performance and is not easy to leak; The pneumatic parts have high strength, which are not easy to burst and ensure long service life

Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove; These push to connect fittings are easy and convenient for you to operate

Can be easily connected to the hose.

Temperatures range from -40 to 160 F.

Connections: Hose Barb x Hose Barb x Hose Barb.

✔Tee Union Adapter: 3/8” male and female compression fittings x 1/4" tube quick connect, and two 1/2" NPT converter fittings.

✔Two Extra Converter Fittings: Fitting A : 1/2" male NPT and 3/8" female NPT threaded connections; Fitting B: 3/8" male NPT and1/2" female NPT threaded connections.Allows to connect both 1/2" and 3/8" water supply.

✔Rough Brass Constructions: Full copper material to prevent leakage, strong and long lasting life time

UNIVERSAL FIT: Features Standard FIP COMP x MIP COMP x MIP COMP Connections to Fit Your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, and Supply Lines.

SPLIT YOUR WATER SUPPLY: This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways. For Example, This Will Allow You To Hook On Your Icemaker Supply Line to Your Kitchen Sink Supply in Minutes! Easy, Cheap, and Safe Solution.

SUPERIOR QUALITY: One-Piece Solid Brass Body Provides Strength, Durability, Performance, and Corrosion Resistance

ALAVENTE push to connect air fittings, wide application range, suitable for air piping, pneumatic tools, etc

High pressure resistance, simple, flexible, space-saving and long service life

Easy to install, available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly

SHOCK PREVENTION: stops pipe banging noise common in the plumbing system

REDUCE STRAIN: mini water hammer arrestor reduces the pressure on plumbing system joints

EASY INSTALL: installation of hammer arrestor only requires simple tools

The product is 1-1/2 WHT Drain Tee

Easy and simple use kit

The product is manufactured in China

1/4 Inch Ball Valve ,2PCS, Check Valve ,2PCS,TEE 2PCS

Package Quantity:12 PCS

Drinks Dispense and water filtration system fittings

Made of high-quality plastics and brass for durable use

Type: Quick Connect Fitting Connector

Advantages: Easy installation and disassembly, good sealing performance

♥【What You Get】The kit includes six types of fittings:ball valve,straight coupling,check valve,elbow union,tee union,two way divider 5 pcs each,30pcs in total.

♥【Superior Quality】Food grade polypropylene PP material, made of real material, strong structure, safe and durable, quality is very guaranteed.

♥【Special Properties】The connector production step is precise, the structure design is unique, and the interface sealing effect is strong.Anti-cracking material, anti-aging corrosion.

Available in many different styles, including elbows, union, and tees

A large variety of tube diameters and pipe sizes available

Conveniently packaged in diverse piece counts to assist with both small and large projects

Help keep pipes that join together from freezing and breaking with this simple application

Easy to use and install on pipes

Package Dimensions: 12.7 L x 5.334H x9.144W(centimeters)

No tools required , Easy to use , quick connect push tee 1/4-Inch OD , Quick Connect Fitting 1/4" RO Water System

Standard fitting for water filter systems using 1/4" OD Water tube

Material: Polypropylene Plastic Tubing,Non-toxic ingredients,Odorless and tasteless

Package content: the package provides you with 24 pieces push to connect tube fittings with 3 different types, including straight push, elbow push and tee push, 3 pieces of each type, such a practical combination that can well meet your daily use, and different types can match different pneumatic piping needs

Long service life: this pneumatic pushes is made of quality plastic and copper, which is solid and firm, not easy to leak or fall off after connection; In addition, it has a good performance of wear resistance, lightweight, pressure resistance, corrosion resistance, which can ensure a long service time

Effortless to operate: the push connect fittings are easy to install and detach; With a push pipe connection at one end and a male thread at the other, it can withstand more pressure without tripping, so you can just push the hose or tube into the fitting without worries, saving your time and energy