Best Malida Tube Fittings in 2026

【Package Includes】: Pex Fittings Set includes 25pcs 1/2" PEX Elbows

【Non-Pollution】: Lead free brass pex fittings, comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified

【Extra-Long Service Life】: High-quality brass pex 90 degree elbow set resists corrosion, rust and high temperature (32℉—200℉).

PEX Kit includes 10 - 1/2 Inch PEX Elbows 90s, 10 -1/2 PEX Inch Tees, 10 – 1/2 Inch Straights Couplers

Made from Lead Free brass which means you can use on potable domestic water lines (washer, sink, shower, etc..) and for radiant heating applications. Highly dezincification resistant or corrosion due to high quality brass. Universal Plumbing Code compliant with AB1953

Easy to install, only need a Crimp/Cinch tool, PEX ring, PEX fitting and PEX pipe. View video for instructions. No glue, flames, solder or bonding agents. Easy installation for potable and radiant applications.

No tools required,Push fit fittings

Easy to use,Mini quick connect push tee 1/4-Inch OD

Push fit fittings,Quick Connect Fitting 1/4" RO Water System

Size: 1/4 inch OD Tube , Length: 32 feet (10meters),+ Package contains: straight jion 2pcs,Elbow jions 2pcs,tee 2pcs,Y Type 2pcs, shut off valve 2pcs

Non-toxic ingredients,Odorless and tasteless

Fits all water purifiers systems

★ Lead-free Brass,meets California AB-1953, Vermont, and new federal standards for low lead applications. Can gurantee your family health and safe on potable and non-potable water.Applicable in residential and commercial usage.

★ Inlet 3/8" OD female COMP x 3/8" OD COMP outlet x 3/8" OD COMP outlet . Angle stop add-a Tee-type is fit your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, second faucet and Supply Lines.This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways.

★ Resists corrosion and mineral buildup, rust, and freeze damage.Have a longer using life than iron and iron galvanized products.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.

✔️【 Lead Free Non-Pollution Compliant Brass 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Suitable for new or retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【Compatibility & Applications 】: Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube. COMPATIBLE with ONLY Crimp or Cinch Type rings and/or connectors. NOT Compatible with: -Expander Fitting System, Uponor/Wirsbo Expander System. This brass crimp fitting can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

【Product Name】Straight Push-in Connect Fittings

【Material】Copper and Plastic

【Size】1/4" Tube OD x 1/8" NPT Thread，Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter

Type: Compression Union

Tube Size:3/8" OD

Materies: BRASS

DIY AIR SYSTEM - Hromee compressed air outlet kit allow you to design and install your own pressurized air system. No more dragging the compressor and reconnecting air hose. It helps you keep the working room clean and ordered.

PU AIR TUBING - Length: 32.8 Feet (10M); Outer Diameter: 1/4” (6.35mm); Inner Diameter: 4.15mm. Max Working Pressure: 120 PSI; Bursting Pressure: 360 PSI. Working Temperature: -4℉- 149℉. PU material provides the high flexible and oil resistant.

CONNECTORS - All the connectors are designed push to connect that is easy to remove and offering good sealing. The kit includes 2 Splitters, 2 Elbows, 2 Tees and 2 Unions. 4 male straight fittings fit 1/4" Tube OD and with 1/4" NPT Thread. The thread need to be seal taped to avoid leakage.

COPPER: Stub-out clamp with Copper Tube Size rating

VERSATILE: Compatible with PEX, CPVC, or copper tubing

IDEAL: For fixture stub-out, lavatory/sink, toilet, tubing isolation, and vertical and horizontal applications

Equipped with a 1/2 inch Crimp PEX inlet and 1/4 inch OD compression outlet connections

The Snap-on faceplate dimensions are 6-1/2 inch x 5 inch; The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch

The box with one-piece box-and-flange design, no additional support framing required

Proven quality and non-corroding

Allows installers to join wet connections, making it the fastest solution for maintenance and repair

Excellent chlorine resistance

【Package Includes】: 1/2" Pex Fittings Set includes 4pcs PEX 1/2" x 1/2" Female NPT Drop Ear Elbow

【Non-Pollution】: Lead free brass pex drop ear elbow 1/2", comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified.

【Extra-Long Service Life】: High-quality brass pex fittings, resists corrosion, rust and high temperature (32℉—200℉).

【RELIABLE PEX MATERIAL】- Amount: 2 rolls; Color: Red / Blue; Nominal Diameter: 1/2"; Total Length: 100ft. Made of excellent PEX material, this non-barrier PEX pipe is non-toxic, maintenance-free, and anti-aging. Fit for potable water or radiant floor water projects and keep quick & uninterrupted hot/cold water flows.

【SUPERB SEALING】- Compatible water temperature:-40℃ to 95℃. This non-broken 1/2" PEX tubing can tackle different weather circumstances, no matter the high temperature or cold days, to ensure the integrity and safe use for longer life expectancy.

【PREMIUM FLEXIBILITY】- Manufactured with min.5" bending radius, this pex tube is easy to bend for different ground situation. Pressure rate: 80 psi @ 200F, 100 psi @ 180F, 160 psi @ 73F. PEX material ensures its crack & leakage-proof features.

Package includes: 4 pieces 6 inch hose clamps

Material: made of 304 stainless steel, corrosion-resistant, will not rust for long-term use

Function: can lock the hose very tightly, leak-proof, and ensure of clamps long lasting, quad lock construction

HIGH QUALITY- The whole hose clamp (including the band, housing and screw) are all made of premium 304 stainless steel material. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable.

WIDE ADJUSTABLE SIZE RANGE- Clamps are flexible and ductile with wide adjustable size 1-1/4'' - 2-1/4'' (33-57mm). Fit for hose outside diameter 1-1/4'' - 2-1/4'' (33-57mm)

WIDELY USED- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor.

Tee – Full slip tee sweats in-line on 1/2" CTS near problem valve or fixture

Tee – Hose tee arresters install on washing machine supply valves or directly to washing machine

Arrester body: 304 stainless steel - Piston: polypropylene with two EPDM o-rings - Tee body: UNS C36000 machined brass

No tools required,Push fit fittings

1/4 inch quick connector,valve 2pcs +Tee Union 2pcs +Elbow Union 2pcs +Straight Union 2pcs + Y Type 2pcs.

1/4 inch OD Water Filter Tube, Length 10 Meters.

Easy to install, quick connection

Can be used with plastic or soft copper tubing,Truly demountable without damage to pipe or fitting

Lead-free, corrosion free, non-toxic, and more chemically resistant than other plastics

【Lead Free Brass】: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet.

【Wildely Used】: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc.

【Durable】: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products.

size: 1/2" NPT male x 1/4" NPT Female ; NPT is an abbreviation of the National (American) Pipe Thread, a U.S. standard 60-degree cone Thread used in North America.pack qty: 2pcs.

Meet NPTF requirement of US, better than NPT thread, could be used as NPT thread, too.

Good raw material brass, high corrosion resistance, low magnetic characteristics and high temperature ductility.

✅MEASUREMENT- The gas ball valve is equipped with a 1/2 inch flare x 1/2 inch female inlet pipe (FIP) threaded connection.

✅QUALITY- The straight-flare gas ball valve is constructed of high-impact, durable brass to provide a strong and long-lasting performance. The working pressure is up to 175 PSI. A working temperature range of 32 degrees Fahrenheit to 125 degrees Fahrenheit is recommended for product safety.

✅FUNCTIONALITY- Designed for use with liquefied petroleum gas, LP gas, and air mixtures.

Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick disconnect plug, 1/8 inch BSPP inner female thread on the other end, Rated to 4000 PSI, Max Pressure: 5000 PSI, Temperature Resistance: 1000 ℃.

Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer, reliable and no leakage.

Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one of the needed items to have in your parts kit.

Type:1/2" Od x 3/8" NPT Male Push to Connect Fittings; Body Style: Male Straight

1/2 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing)

3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

Proven quality and non-corroding

Reduced flow noise

Excellent chlorine resistance

Hex bushing for connecting two pipes with different diameters

Size: Standard 3/8 inch NPT male to 1/4 inch NPT female.

Heavy-duty brass construction with rust proof, Easy to connect.

Female -6 AN (9/16"x18) swivel to 3/8 inch barb fuel line quick disconnect tube adaptor, straight

Made of High Performance Lightweight 6061-T6 CNC Machined Billet Aircraft Aluminium Material

Black Anodized Finish for Durability and Strength

What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY); Different styles can suit different pneumatic piping needs

Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection; The sealing element has good sealing performance and is not easy to leak; The pneumatic parts have high strength, which are not easy to burst and ensure long service life

Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove; These push to connect fittings are easy and convenient for you to operate

Type:1/4" Od x 1/8" NPT Thread Push to Connect Fittings; Body Style: Female Straight

1/4 inch Air line Fittings Fluid Admitted: Air, Water (No Freezing)

1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

1/4 Union Straight Push to connect fittings Fluid Admitted: Air, Water, Steam ;Pressure: 2MPa | 290psi/ Applicable: Pipe PU/NYLON/Soft PE; Working Temperature:-20°C—120°C | -4°F—248°F

1/4 Push connectors Nickel Plated Brass - corrosion resistance, ductility at high temperatures, and low magnetic permeability; Seal: O-ring FKM(Viton)

These 1/4 quick connect fittings work great ,available in various styles and models ,good to suit your pneumatic piping needs perfectly, easy to connect and disconnect, a quick fix to your leaking problems.