Best Cwa Hydraulics in 2026

Bore: 2 1/2"

Stroke: 12"

Retracted: 22 1/4"

Bore: 1 1/2"

Stroke: 4"

Retracted: 12"

Bore: 2"

Stroke: 4"

Retracted: 14 1/4"

Bore: 1 1/2"

Stroke: 4"

Retracted: 11 3/4"

HEAVY DUTY Gas lift cylinder that holds great weights - tall center support column of the chair. Holds up to 450 lbs on most office, executive and computer chairs.Highest End Class 4 gas cylinder on market.

STANDARD CYLINDER DIAMETER: Outer cylinder: 2 inches, Inner cylinder: 1.1 inches. Please confirm the measurement before ordering.

SMOOTH & NOISELESS: Full 360 degree rotation, smooth and noiseless movements to all directions

Bore 3" (OD 3.38"), Stroke 16 inch, Rod 1.5", Retracted 24", Extended 40", Pin holes 1"

Ports SAE 8 (O-ring boss), Pressure 3500 PSI, Column Load 21,000 LBs, welded hydraulic cylinder

This universal cross tube hydraulic cylinder is a perfect replacement for front end loaders

Bore 4" (OD 4.5"), Stroke 36 inch, Rod 2", Retracted 46", Extended 82", Pin holes 1.5"

Ports SAE 8 (O-ring boss), Pressure 3500 PSI, Column Load 26,000 LBs, welded hydraulic cylinder

This universal cross tube hydraulic cylinder is a perfect replacement for front end loaders

Bore 1.5" (OD 1.88"), Stroke 16 inch, Rod 1", Retracted 24", Extended 40", Pin holes 0.75"

Ports SAE 6 (O-ring boss), Pressure 3500 PSI, Column Load 5,300 LBs, welded hydraulic cylinder

This universal cross tube hydraulic cylinder is a perfect replacement for front end loaders

Bore 2" (OD 2.38"), Stroke 24 inch, Rod 1.25", Retracted 34", Extended 58", Pin holes 1"

Ports SAE 6 (O-ring boss), Pressure 3500 PSI, Column Load 8,400 LBs, welded hydraulic cylinder

This Swivel Eye Universal hydraulic cylinder is a perfect replacement for mobile equipment

Heavy Duty Jack: Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Paint spraying at the surface, prevent scratching and corrosion.

Large Lifting Capacity: Our ram hydraulic cylinder is designed to provide reliable support during operation. No stuck when lifting, large 60 T/130000 LBS tonnage, enough stroke(50mm/2 inches).

Convenient Use: Quick connecting head with dust cover, avoid the jack's inside from dust, features the firm connection with no leakage. A portable handle increases flexibility and convenience.

Bore 4" (OD 4.5"), Stroke 24", Rod 2", Retracted 34.25", Extended 58.25", Pins 1" included

Ports SAE 8 (O-ring boss), Pressure 3500 PSI, Column Load 36,000 LBs, welded hydraulic cylinder

This clevis universal hydraulic cylinder is a perfect replacement for any agriculture equipment

Bore 4" (OD 4.5"), Stroke 30", Rod 2", Retracted 40.25", Extended 70.25", Pins 1" included

Ports SAE 8 (O-ring boss), Pressure 3500 PSI, Column Load 33,000 LBs, welded hydraulic cylinder

This clevis universal hydraulic cylinder is a perfect replacement for any agriculture equipment

Bore 3" (OD 3.38"), Stroke 16", Rod 1.5", Retracted 26.25", Extended 42.25", Pins 1" included

Ports SAE 8 (O-ring boss), Pressure 3500 PSI, Column Load 21,200 LBs, welded hydraulic cylinder

This clevis universal hydraulic cylinder is a perfect replacement for any agriculture equipment

Bore 4" (OD 4.5"), Stroke 8", Rod 2", Retracted 20.25", Extended 28.25", Pins 1" included

Ports SAE 8 (O-ring boss), Pressure 3500 PSI, Column Load 37,000 LBs, welded hydraulic cylinder

This clevis universal hydraulic cylinder is a perfect replacement for any agriculture equipment

30 US Ton Capacity. 4" Stroke

Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return.

Hard black oxide plated high carbon steel ram. Proprietary heat-treated steel shell.

[Small & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces.

[Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate.

[Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2); the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP).

▷[IMPORTANT PARAMETERS]---Tonnage: 50T | Total Stroke: 2.56”/65mm | Self height: 2.8” /71mm | Weight: 19.8lbs /9kg |Oil storage: 113cc| Usded with Pump: CP-700 | Connector: ZG 3/8.

▷[TWO-STAGE OIL OUTPUT DESIGN]---This low profile hydraulic pump is designed in two stage of high and low speed for quick oil output.

▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use.

▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable.

▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2.24inches high, but the stroke is up to 1.18 inches. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use.

▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder.

[Low Profile & Portable] - This mini hydraulic cylinder is ultra-thin, portable, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces.

[Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate.

[Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2); the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP).

[Low Profile & Portable] - This mini hydraulic cylinder is ultra-thin, portable, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces.

[Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate.

[Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 5T/10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2); the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP).

▷[IMPORTANT PARAMETERS]---Tonnage: 20T | Stroke: 0.51 inch/13mm | Self height: 2.3 inches/58mm | Outer diameter: 4x3 inches/100x80mm | Internal diameter: 2.6 inches/65mm | Weight: 6 lbs/2.75kg | Effective area: 5.13 square inches/33.16cm2 | Usded with Pump: CP-180(not included).

▷[SMALLER SIZE & GREATER WORKING CAPACITY]---The height of this hydraulic jack is only 2.3inches, which can lift 20T heavy objects. It has the advantages of smaller size and greater working capacity, especially in a small space location, and has the functions of portability, flexibility, and large lifting force.

▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder.

50 US Ton Capacity. 4" Stroke

Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return.

Hard black oxide plated high carbon steel ram. Proprietary heat-treated steel shell.

20 US Ton Capacity. 6" Stroke Hollow Hydraulic Cylinder Ram

Connector Type: 3/8" NPT CR-400 quick hydraulic coupler with dust cap

Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return.

10 US Ton Capacity. 4" Stroke

Connector Type: 3/8" NPT CR-400 quick hydraulic coupler with dust cap

Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return.

Tonnage=50

Stroke=4"

Oil Capacity(in3)=46.86

Tonnage=100

Stroke=2"

Oil Capacity(in3)=47.53

▷[BASIC PARAMETERS]---Tonnage: 10T | Stroke: 2’’/50mm| Self height: 4”/100mm | Outer diameter: 2.36’’/60mm | Internal diameter:1.77’’/45mm | Weight:5.5lbs/2.5kg | Effective area: 2.46sq.in./15.89cm² | Usded with Pump: CP-180(B06XG4HBNT) | Connector: ZG3/8’’ male connectorommended

▷[2INCH STROKE]---With 2’’(50mm) stroke, the hydraulic ram can lift much higher than others. After pressure is released, the jack can retract automatically, super convenient.

▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use.

[Hollow Design] - The hollow design of the cylinder jack allows it to be used for pushing or pulling, which can meet your different needs.

[Split Design] - The porta power ram is portable, small in size and easy to store. But it must be used with a hydraulic/electric pump. For example, they can all be used with CP-700(ASIN: B08QV222RP).

[Automatically Retract]- This hollow ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate.

Tonnage=30

Stroke=4"

Oil Capacity(in3)=29.11

Shaft Diameter: 1-1/4"

Closed Length: 24-1/4"

Extended Length: 38-1/4"