Best Dobstfy in 2026

【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12" x 12" (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want.

【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production.

【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry.

【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC.

【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch.

【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint.

GLOW MULTICOLOR CHANGE - Every 10 Meters color change with Green,Blue,Purple and Pink. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament

UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding

HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm

Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.

Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.

Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.

3D printer filament (1.75mm diameter, red; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)

Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish

Engineered to reduce jamming

Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per Spool; Vacuumed Sealed with Desiccant; Recommended extruder temperature:195 - 230°C; Recommended platform temperature: 40 - 60°C

SainSmart TPU filament is renowned for its high quality and ease of use, offering you a flexible and strong parts with consistency and smooth finish.

Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including SainSmart x Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.

Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly

2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs

Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow

【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.

【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

【Bright and Stunning Colors】: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.

Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.

Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.

Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.

【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.

【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

【Bright and Stunning Colors】: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.

Compatible with ELEGOO Mars 3 and Mars 3 Pro Resin 3D printer.

Film dimensions: 146*195mm, Film thickness: 0.127mm. Note:Please remove the double-sided protective film before use.

Compared with FEP release film, PFA release liner film has higher temperature resistance and printing success rate, and less release tension for easier to remove models.

GREAT VALUE: sharp quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!

Anti-Static, Non-Magnetic CURVED PRECISION TWEEZERS; 3D printing tweezers great for nozzle maintenance and cleaning excess support material

10 pcs of 0.40mm diameter FLEXIBLE stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears

Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying

Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them

Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.

Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro.

Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.

【4K Monochrome LCD】6.6-inch 4K monochrome LCD screen with a replaceable anti-scratch tempered glass with 9H hardness for a better light transmittance at 4098 x 2560 high resolution, protecting the screen while restoring model details to the greatest extent.

【Powerful COB Light Source】Upgraded free-form surface COB lens consists of 36 highly integrated UV LED lights, paired with Fresnel lens to deliver an even beam of 405nm wavelength for a more smooth surface finish and incredible printing quality.

【Large Build Volume】With a large build volume of 143.43×89.6×175 mm³ (5.647×3.52×6.8 in³), you can print one large model or undergo batch printing in a single job, which saves your time and greatly improves your productivity.

Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors.

Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying.

Used for heated bed or hot end.

【10" 8K Monochrome LCD】ELEGOO Saturn 2 Resin 3D Printer adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680x4320 and an ultra-fine XY resolution of 28.5 microns, outputting outstandingly detailed 3D models with a cure time of only 1-3s per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness for better light transmission and protection.

【43% Larger Printing Volume】With a build volume of 219x123x250mm / 8.62x4.84x9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.

【Fresnel Collimating Light Source】Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with free-form surface COB lens and FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength with 92% light uniformity, excellent printing accuracy, and a more smooth surface finish.

【Higher resolution and output】Mars 3 is ELEGOO's first desktop mSLA 3D printer with super-high precision. It adopts a 6.66 inches mono LCD with Ultra 4K HD resolution, which has a 30% higher XY resolution at 35μm and 37% higher build volume than Mars 2, delivering amazing 3D prints.

【The release film 2.0】With less release tension, the small and thin supports added to your model will be well-protected. Mars 3 has a greatly improved success rate when printing 3D models with lots of details.

【Upgraded light source】 36 highly integrated LED lights with a brand new COB lens that has a free-form surface can deliver over 90% uniformity of UV light illumination , making the printing accuracy upgraded to another level.

【Intelligent Time Control】The LED time display enable you to control the curing time conveniently.

【Light Driven Turntable】The light driven turntable is able to absorb UV light to rotate without battery.

【Reflective Sheet】There is reflective sheet inside the cabinet which have the lights focused to get a better curing effect.

Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.

Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.

The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. NOTE: It can't be used to cure liquid resin directly and can't cure filament prints.

The 360° rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can't use batteries for power.Maximum display /rotate weighing less than 500g/1.1Pound which is also suggested size that the light can cure. TIPS: Close to light will help to speed up and rotate heavier.

The resin can be cured in 10-15 seconds from a distance of 5 cm from the light. NOTICE: thicker parts require more time to cure. What's more the dimension of the UV light is 3.35*4.53*3.74" and the turntable diameter is 3.5".

Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm.

Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones.

SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones.

100% Creality Original--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.

Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Very easy to take off the models, NO tools to remove models

Use clips to fix the glass plate on the hot bed.

Higher temperature higher sticky. The models will stick on bed firmly when temperature is high

Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.

High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.

0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.

【6.66” Ultra 4K Mono LCD】Equipped with 6.6” 4K monochrome LCD, Mars 3 Pro can prints out works at 35µm super high XY resolution. Build Volume 143×89×175mm/5.62×3.5×6.8in, 40% larger than Mars 2. A protective film is installed on the LCD to prevent resin leakage from damaging the screen

【High-End COB Light Source】New generation COB light structure is designed with 36 units LED lights, a free-form surface lens and a Fresnel lens, powerful and reliable, resulting in 92% and more uniform UV distribution for higher printing accuracy

【Comfortable Printing Experience】Build-in activated carbon reducing bad odor of resin, offer you a more comfortable and fresh experience. ATTENTION USB port next to the vat is for odor reducing facility ONLY

【300°High-temp Nozzle】Upgraded brass nozzle can stand up to 300°printing temperature and it is compatible with multiple filaments such as PLA, ABS, PVA, Wood, TPU, PRTG and PA which providing more possibilities for creation.

【Sprite Dual-Gear Direct Drive Extruder】Compatible with more filaments, Ender 3 S1 Pro 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

【4.3 inch Touch Screen】The 4.3-inch touch screen supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes.

THERMAL DYNAMIC COATING - Based on science, works like magic; Parts stick at hot and release when cooled; Dries fast and non tacky so it won't clog your nozzle with goo

LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print

LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water

Sufficient content: this package contains 15 pieces extruder wheels in a pack, sufficient quantity to satisfy your various demands and replacements

Check the dimension: each 36 teeth gear measures approx. 11 x 11 mm/ 0.43 x 0.43 inch (L x W), its inner diameter is approx. 5 mm/ 0.2 inch, 36 teeth, fit for most standard 3D printers; Please check whether the size is suitable for your needs before purchasing

Practical function: our 3D printer parts can replace your broken one and make your printer work more efficiently, improve the performance and reliability for your 3D printers

42-40 motor for the e-axis of the printer of the Creality Ender series and the CR series, like Ender3 / 3pro / 5 / 5pro / 5plus; CR10 / 10MINI / 10SProV2 / 10S4 / 10S5 / 10MAX / 10V2 / 10V3; The motor 42-40 also fits the Y-axis of Ender5 / 5pro / CR-10V2 / CR-10SProV2.

1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.

Shaft diameter: 5mm （D-shape）