Best Dynex in 2026

Allows older TVs that don't have audio/video jacks to be connected to newer components

Includes an S-video input

Includes channel 3 / 4 switch to not interfere with existing equipment such as a VCR

Wireless to eliminate car clutter

Converts all CD, MiniDisc, MP3, MP4 player or Apple iPod output into crystal-clear sound that emits through your FM car radio

Full-channel frequency ranges between 88MHz and 108MHz

Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits

Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer

Positive distribution bus with #10-32 stud

150A Common BusBar with 10 screws (part number 2301)

Max voltage: 300V AC/ 48V DC, Continuous Rating: 130A AC/ 150A DC

Terminal Screws: 10 x #8-32, Terminal Studs: 2 x 1/4"-20

Can accept bare wire or spades. Can accept 12 to 18 AWG speaker wires.

Color coded Black/red rings for maintaining proper polarity

Secure, positive contact with binding posts

Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block

1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Solid Brass,Gold-Plated for Corrosion Resistance

MADE IN THE USA - This Busbar Measures approximately 1 3/8” Wide x 1 7/8” Tall x 6 5/8” Long

Nickel Plated Brass Contact Plate For Optimal Current Transfer And Weather Resistance. Glass-Filled Nylon Base For Superior Insulation And Strength

Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments - Detachable Cover Included To Protect Connections. WE RECOMMEND A SMALL AMOUNT OF NICKEL ANTI SEIZE BE APPLIED TO THE THREADS TO PREVENT GALLING

【QUICK FIX】 – When the current/voltage exceeds the rated range,the fuse will be automatically blown.It has leds beside each load to indicate if a circuit has shorted or has blown.So you can easily identify it and change it!

【MAKE WIRING CLEAN】– Instead of piling a mess of wires and fuse holders onto your battery posts, WUPP 12 volt fuse block/ground bus kit gives you 6 dedicated fuses and 6 ground locations to keep all of your wires clean, organized, and accessible. Made wiring electronics in your vehicles or boat a breeze!

【UNIVERSAL PROTECTION】– The input rated voltage of the fuse box is 32V,and the input rated current is 100A.Each circuit outputs a maximum current of 30A. All bus bars and fuse pieces are nickel-plated copper, corrosion-resistant and highly conductive.

ON-Q PHONE/ DATA KEYSTONE JACK: Universal design supports either T568A or T568B termination standard. Ideal for streaming TV, Movies, gaming and faster downloads.

EASY TO INSTALL: Easy "1-for-1" installation lets you replace your existing inserts with On-Q phone keystone jack in just minutes. Color-coded wiring label is easy to read.

REAR MOUNT, SNAP-IN KEYSTONE DESIGN fits in your existing electrical box and does not require new wires for typical installation. Innovative assembly and snap-in system make it fast and simple to install.

Connections: 6 Standard 45A power pole connectors. Can compatible 15A, 30A or 45A power pole connectors.

Maximum Voltag: 60VDC.

Maximum Current: 45A.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

Single connections with 5/16" stainless steel studs. Comes with 8AWG 5/16” ring terminals and stainless steel screws

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

High Performance 4 Way Car Audio Power/Ground Distribution Block

1 X 0/2/4 Gauge In, 4 X 4/8 Gauge Out. Forged and Machined Brass Construction for Maximum Power Transfer

Marine-grade Satin Chrome Finish for Superior Corrosion Resistance

1 x 0GA IN, 3 x 4GA OUT: Input accepts 1/0 or 4 gauge wire, Outputs accepts 4 or 8 gauge wire, Come with 2 Pieces car amplifier power distribution, make wiring your system easier with high quality distribution blocks.

3-Way Connection: ideal for multi car amp systems, nickle plated internal materials eliminates the possibility of corrosion, rust, oxidation, or premature wear on speaker wire connection points.

Deep Wire Recesses: VonSom distribution blocks with deep recesses to protect wiring from being left exposed to the elements or other objects that might cause your system to malfuction.

16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections.

Rated current 16 Amp(total input or output), Maximum voltage 48V

A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.

This fuse block both for power and ground,Red LED lights indicator,when the fuse is not working,the light will be on.Then you can clearly know if the fuse block is normal.

Dsitribution ground block for car camper power solar panel battery ATV UTV caravans trailer marine boat and other for Power distribution.

Fuse block Input:2 x 0/4GA Output:4 x 4/8GA ,Battery distribution 2 IN 4 OUT: Input:2 x 0/4GA Output:4 x 4/8GA

Operating voltage: 0 to 32VDC, No-load current: 2mA(for power indicator LED). Input port: maximum input current 40A, fuse 40A. Output port: 8 output ports, fuse 30A*2, 20A*2, 10A*2, 5A*1, 3A*1.

With power indicator LED. High-quality fuse holder, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40A.

Enclosure: High quality aluminum enclosure,thickness 1.5mm/0.06".

WHOLE-HOUSE VOLUME CONTROL: Trimless Decora style impedance-matching volume control kit for whole house audio systems and dedicated audio zones so you can control speaker volume independently within various areas of your home or office.

DECORA STYLE DESIGN: Installs easily and works with almost any audio system, inlclude white trim plate to match your room décor as well as a 12-point linear control knob to adjust volume from high to inaudible.

INCLUDES ADJUSTABLE JUMPERS: Rated at 300 Watts peak with minimal bass roll-off, includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously depending on what type of load your amp can handle.

POWER: The VMS100 is rated at 100 Watts peak, maintaining the full hi-fi audio frequency with minimal bass roll-off. Adjustable jumpers add up to eight pairs of eight ohm speakers simultaneously.

VOLUME CONTROL: The controls allow you to adjust the volume up or down compatible with almost any dedicated audio zone or whole house sound system. It is ideal for dining rooms, saunas, and porches around the house.

IMPEDANCE PROTECTION: This feature of VMS100 assists in stabilizing the ohm load going back to the amp or receiver with parallel connections to avoid overheating and damaging the amplifier.

20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC power jack. Support for multiple module extension connections.

Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp. Maximum voltage 48V DC or AC.

Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug.

Solid COPPER GOLD PLATED-High Performance Copper Car Audio Ground/Power Distribution Block

Solid Construction Durable High Temperature Base and Clear Heat Resistant Housing

1-0/2/4 Gauge AWG In,2-4/6/8 Gauge AWG Out,Easy Installation for Multiuse Combinations

1/0/2/4 Gauge AWG Input 4/8 Gauge AWG Output 3-Way Copper Audio Power/Ground Distribution Block

Solid COPPER GOLD PLATED-High Conductive Finsh,Gold Plated Brass Hardware

Crystal Clear Cover, Heat Resistant Base and Compact Space Saving design

1 x 0GA IN, 5 Way OUT: Input accepts 1/0 or 4 gauge wire, Outputs accepts 2, 4 or 8 gauge wire, include 1 x 2GA, 2 x 4GA, 2 x 8GA Out. Come with 2 pieces car amplifier power distribution, make wiring your system easier with high quality distribution blocks.

5-Way Solid Connection: ideal for multi car amp systems, nickle plated internal materials eliminates the possibility of corrosion, rust, oxidation, or premature wear on speaker wire connection points.

Deep Wire Recesses: VonSom distribution blocks with deep recesses to protect wiring from being left exposed to the elements or other objects that might cause your system to malfuction.

High Performance Copper 2 way Car Audio Power/Ground Distribution Block.

1-0/2/4 Gauge AWG In,2-0/2/4 Gauge AWG Out.

Solid brass,the Interior Is Made Of Copper.

【13-Channels Dual-Pass Power Supply】The PCB power distribution board can distribute 1-channel dual-pass power supply into 13-channels dual-pass power supplies, which is convenient for the power supply of multiple electrical appliances.

【Three Connection Methods】The design of the power distributor can make it have three ways of use. First: directly divide the positive and negative poles of 1 channel power supply into 13 channels. Second: You can connect several PCB power distribution board to expand more power interfaces. Third: You can short-circuit any interface at both ends of the power distribution board to achieve the effect of a multi-point interface of single-pass circuit.

【Built-in Double-Layer Wiring】The double-layer thick wiring is used inside the PCB board, which has a better power flow effect, and there will be no poor power contact or power failure.

6 way fuse block 12volt - 32volt DC,Red LED indicator light lights up immediately when the corresponding fuse is blown

PBT material fuse box, it is mechanically strong,isolated,heat-resistant and flammable.Resistant to high and low temperature.There are hardly any problems such as breaks, deformations, burns and short circuits, including heat shrink tube set, heat-activated adhesive seals the wire ends from the elements

The blade fuses block connections "+" and "-" are M5,100A 32V DC.Max.single circuit current max 30a.The fuse distribution block makes your wire more cleaner and safer

【Product Name】- Marine bus bar 12v, these 12v bus bar terminal blocks will come in pairs, includes one positive bus bar (red one) and one ground bus bar (black one).

【Terminals & Rating】- Each battery bus bar includes - 6 x M6 (1/4") terminal studs. This bus bar 12v marine can handle voltage @ Max 300V AC, 48V DC, and continous amperage @ Max 130A AC, 150A DC.

【Round Corner Base】 - The 12v power distribution block is unique round corner base design, which makes the battery terminal block unique and special, looks more extraordinary compared with others.

Very sleek, small, efficient, and cost effective way to display your RCA/DVD/VCR/Game exclusive devices on regular or older televisions, record with VCR or DVD Recorders, or play in car/boat entertainment systems that use Coax / RF connections

Works straight out of the box, is easy to hook up, and comes with all necessary cables -- just plug and play

Wall-powered, compact and lightweight RF Modulator

Banana Keystone jack with red & black rings to be used with white keystone wall plates or panels.

Screw type audio binding post with adjustable thumb screws can be used with banana plugs or bare speaker wire.

Sturdy snap-in construction of keystone inserts can be easily removed and relocated when upgrading or redecorating.