Best Gme in 2026

【DESIGNED AND ENGINEERED IN THE USA】 GME Professional in Circuit ESR capacitor tester designed and supported in the USA; compare to most other ESR meters on the market that are generic private label import with unknown manufacturer and no support or warranty

【ACCURATE MICROPROCESSOR CONTROLLED】 Microprocessor generated 100 kHz output test frequency and low 15 mVp-p output test voltage that will not turn on any solid state devices during testing, critical for accurate test result in circuitry with active components

【INTELLIGENT DESIGN】 ESR capacitor tester automatically discharges capacitor under test; Audible buzzer announces ESR range during testing allows quick checking of entire PCB in seconds; Intelligent automatic calibration on power up, no manual zero needed unlike many other ESR meters

【5 DECADE CAPACITANCE RANGE】Wide capacitance range from 100pF to 11.111μF in 100pF steps; 5% high accuracy ideal for prototyping, educational, and professional calibration of test equipment

【EASY TO USE】20 slide switches organized in a clean 4 x 5 grid for easy use; each switch displays a visible white dot when in the ON position, two binding posts for easy versatile connection with banana plugs, bare wires, spade lugs, or alligator clips

【PORTABLE AND RUGGED DESIGN】Housed in protective impact resistant rubber holster with tilt-stand

Voltbeat technology and continuous self-test - so you always know it is working

Upon detection, tip glows and beeper sounds

CAT IV 1000 V for added protection

WIDE APPLICATIONS - KAIWEETS HT118A Multimeter measures up to 600V AC/DC voltage, 10A AC/DC current and 60 MOhms resistance, electrical tester also tests temperature, capacitance, frequency, duty-cycle, wire on-off, and test diodes and continuity.

EASY OPERATION - Switch the dial to the function you need, and the LED lights on the jacks will shine accordingly. To plug in the leads is easy. Autoranging saves you the hassle of having to know which range of value. Large 2.9” LCD backlight display, easy-to-read digits offer a 6000-count resolution.

MULTI-FUNCTION - Non-contact voltage testing and Live function with sound and light alarm. Flashlight on the back ensures easy use in dimly lit places. Min/Max/Average to record signal fluctuations. Stable kickstand, Pen slot on the back, Low battery prompt, Data retention, Auto power-off.

Versatile Digital Multimeter - Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Temperature

Thoughtful Design - Support Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make the process of measurements easier. Professional level is reflected in some features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage

Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately.

VERSATILE DIGITAL MULTIMETER - Accurately measures AC/DC Voltage, DC Current, Resistance, and Diode. This Multimeter is a really useful tool for solving industrial and household electrical issues. Suitable for Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc.

TROUBLESHOOTING WITH Accuracy - This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.

ENSURES SAFETY - Double ceramic fuse is anti-burn and protects from overloading.The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks. And low battery indication will be displayed when battery power is low.

SAFETY FIRST: It will send out multiple alarms through sound and light. When the voltage is detected, the tip will send out red light and beep. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the screen will be red or green, red means high voltage and live wire are detected, green means low voltage and null wire are detected.

NON-CONTACT: With NCV inductive probe for AC voltage; Just place the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire. Ideal for breakpoint Test. Handy circuit tester for electricians, homeowners.

DUAL RANGE: Detects standard and low voltage (12-1000V AC / 48-1000V AC) for more sensitive and flexible measurements. Press the S button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring etc.; The NCV sensor automatically recognizes the voltage and displays it on the bar graph.

[Auto-Ranging Clamp Meter]: The meter measures AC Current to 600 amp, AC and DC Voltage to 600 V, Resistance to 40MΩ and Capacitance to 4MF. Does not measure DC Current.

[True-RMS Amp Meter]: The sensing meter accurately measures distorted waveforms and provides true readings when measuring linear or non-linear loads.

[Advanced Functions]: Auto-off of inactivity after 15 minutes, Data Hold, MAX/MIN Reading, Low Battery Indicator and Continuity Loud Buzzer.

Battery Tester For All Batteries - Works with AAA AA C D 9V 1.5V batteries and button type.

Easy to use - quickly identify "good" (green),"low" (yellow),"replace/recharge" (red) battery status

No Battery Needed For Operation - Clear to read. Activated by the battery being checked.

CL120 Clamp Meter measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads

Meter has backlit LCD for ease of viewing in low light and is CAT III 600V, Class 2 Double Insulated

RT210 detects the most common wiring problems in standard and GFCI receptacles

True-rms for accurate measurements on non-linear loads

safety rated

Large white LED Backlight to work in poorly lit areas

Product 1: Calibrated caliper with a measurement range of 0 to 6" (0 to 150mm), resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.001", for measuring inner/outer diameters, depth, and step of items in harsh workshop conditions

Product 1: LCD screen displays in inches and metric units

Product 1: Thumb roller and Absolute electrostatic capacitance type linear encoder for accurate measurements

WIDE APPLICATIONS - The AstroAI M4K0R Multimeter accurately measures AC/DC voltage to 600V, Current to 10A, Resistance to 40MΩ. You can use it for continuity test, diode test, battery test and live wire test. Includes 1.5V, 9V and 12V battery test modes to easily test a wide variety of batteries. Multimeter light turns red for low voltage and green for enough voltage.

NON-CONTACT - Fully safe non-contact voltage testing with sound and light alarms. You can detects AC voltage without the use of test leads. Uses NCV function：When the Meter senses a strong AC signal, the red indicator light will turn on and the buzzer will emit a quick beep.

THOUGHTFUL DESIGN - Support Data Hold, Max, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like Audial and Visual Alarm, LCD Backlit Screen and Flashlight make it easy to use. Two 1.5V AAA batteries are included in the package.

Southwire Pen style voltage tester

AUDIBLE AND VISUAL INDICATION of AC voltage from 100-600V AC

INCREASED BATTERY LIFE: the auto power off feature increases the battery life by powering off after 5 minuets of inactivity

Voltage, resistance, continuity, capacitance

Input terminal for AC and DC current measurements to 10 A and current

Backlit display

[UNIQUE DESIGN- ANTI-LOST NEEDLE GUARD PROTECTION]: Adopt the integrated structure design of the probe protection cover, needle guard function is added to ensure that there will be no stab wounds and the guard will not be lost. Convenient to carry and take it wherever you go.

[LED INDICATION, BIDIRECTIONAL VOLTAGE TESTING]: This upgrade circuit test light is a bidirectional voltage tester. You can attach the alligator clamp either to negative or positive ground, there is also a light emitting diode on the circuit board for polarity indication, red light indicates positive polarity and green light indicates negative polarity.

[WIDER VOLTAGE RANGE] Compared with the auto electrical tester on the market, the maximum voltage measured is only 48V, but the maximum voltage that our technology can measure is upgraded to 60V. AWBLIN circuit test is ideal for checking various vehicles electrical circuits, quickly check automotive headlights, taillights, turn signal circuits, faulty sockets, fuse connections, also for testing other 3-60V DC wirings and circuits.

【100% Safety Assurance】Built-in Double Fuse. Overload Protection on all ranges.

【Auto-ranging Tester】Accurately measure AC/DC voltage, AC/DC current, resistance, frequency, continuity, diode, etc.

【Backlight Display】 Designed with 3 1/2 digit LCD display and 'Backlight', showing the reading clearly in low light areas.

WIDE APPLICATIONS: This AstroAI digital multimeter features 6000 counts auto-ranging for accurate measurement of AC/DC Voltage, Current, Resistance, Continuity, Capacitance, Frequency, Diodes and Temperature. This multimeter is a really useful tool for electrician test, household use, automotive, industrial electrical problems

LED INTELLIGENT JACK: Switch the dial and the LED lights on and the jacks will shine accordingly. Switch the dial to choose the function you need, the corresponding LED light flashes to tell you which jack you should choose. A large LCD backlight display and flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back.

MULTIFUNCTION: Features smart functions, Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging, Backlight and Flashlight. The LCD screen changes to red while detecting live wires, and the backlight turns orange when measuring high voltage.

[Wide Application], professional automotive circuit tester/circuit test light with 6-24V DC voltage testing range, ideal for checking various vehicles electrical circuits, quickly check automotive headlights, taillights, turn signal circuits, faulty sockets, fuse connections, also for testing other 6-24v DC wirings and circuits.

[Quality LED Bulb], high visibility and strictly tested long service life LED test light bulb to indicate circuits’ signal, the brightness of the light will be different with the different measured voltages. Also including 1 PCS REPLACEMENT LED BULB to make it serve you faithfully for years.

[Bidirectional Current Voltage Testing], you can attach the alligator clamp either to negative or positive ground, while use the probe to touch the other side.

Integrated GFCI test button to verify the correct operation of GFCI equipped outlets

Bright LEDs for fast, easy identification of miswired outlets

Compact, rugged design for use at every job

Low cost form, fit and functional replacement board for Lennox BCC1, BCC2 and BCC3 circuit boards

Controls inducer fan motor, blower fan and monitors limit switches

Microprocessor-based design

Versatile Digital Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT)! AC/DC Voltage, Capacitance, Resistance, Diode Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues

Large Jaw Opening: The jaw opening measures AC current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces

Thoughtful Design: Support Data Hold, Max/Min, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like Audial and Visual Alarm, LCD Backlit Screen and Flashlight make it easy to use. Two 1.5V AAA batteries are included in the package

VERSATILE SETTINGS: The AstroAI Digital Multimeter accurately measures AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, and Tests Diodes and Batteries (1.5, 9, 12V Battery Settings)

NON-CONTACT SAFETY: This DMM is designed with safety in mind. The NCV Function minimizes exposure to live wires; the probe works for outlets, sockets, terminals, and more

PRACTICAL FEATURES: When using a Multimeter, the small details like Data Hold, a Large Backlight LCD Screen, Kickstand, and Low Battery Indicator help get the job done better and faster

VERIFIES VOLTAGE PRESENSE: Verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting (GFI6302 and VD6504)

DURABLE: Hi-Impact Resistant ABS housing with soft over-molded rubber grips with a compact ergonomic design (GFI6302 and VD6504)

QUICKLY READ: Bright color-coded neon lights for easy visual indication (GFI6302)

Wide Range of Applications: can measure AC and DC voltage, resistance, and current; can test circuit continuity, battery quality, and diode biases; a must-have addition to all your electrical and electronic tools for industrial and household use

High Quality Display with Backlight Function: features a high quality 3 ½ digits display with maximum display value of 1999 with automatic polarity display; with backlight to conveniently see the values in dimly-lit areas

Features Hold function that retains the last measured value, kick-stand, silicone cover for protection; low battery indicator icon displayed when battery power is low; BATT function to test battery quality; easy to use and operate

Proster LCR meter : inductance, capacitance and resistance measuring meter,it is a Specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2.

High Accuracy : (Inductance) Measuring accuracy up to ±(2%+5); (Capacitance) Measuring accuracy up to ±(2%+5)Forward voltage drop of diode:Displaty forward voltage drop of diode;Forward voltage of DC:Approx.1mA;Reverse DC voltage:Approx.2.8V

Rotatable LCD Display : Multi angle adjustment for easy reading.There is no need to hold tester while measuring, more convenient operation.

Can display 1999 counts and test capacitance from range 200pF~20mF.

With LCD backlight display and data hold,easy to read and record data in dark.

.Handheld capacitance meter,high reliability,high accuracy and portability.

[High Performance] AVID POWER 6000 counts auto-ranging digital multimeter is ideal for accurate measurement of AC/DC voltage, AC/DC current, continuity, frequency, resistance, capacitance, diode, temperature and battery checking. This DMM is a must-have for home improvement, industrial, automotive and household electrical problems.

[Multifunction] Back built-in LED light provides extra workspace illumination. This multimeter features NCV testing and detecting function with sound and light alarm, Backlight, Auto power off, Low battery indication, Data retention, Max/Min data, 6000 counts Auto-Ranging.

[Safety Compliance] Meeting IEC Rated CAT III 1000V, CAT IV 600V, CE standard. High Voltage Protection, Anti-Burn with double ceramic fuse and thermistor protection circuit. Double insulated machine. The silicone protective case provides a comfortable grip and prevents it from falling or bumping damage.

[UNIQUE DESIGN- ANTI-LOST NEEDLE GUARD PROTECTION]: Adopt the integrated structure design of the probe protection cover, needle guard function is added to ensure that there will be no stab wounds and the guard will not be lost. Convenient to carry and take it wherever you go.

[LED INDICATION, BIDIRECTIONAL VOLTAGE TESTING]: This upgrade circuit test light is a bidirectional voltage tester. You can attach the alligator clamp either to negative or positive ground, there is also a light emitting diode on the circuit board for polarity indication, red light indicates positive polarity and green light indicates negative polarity.

[BUZZER WARNING]: The LED light will be on and there will be a buzzing sound during the test.