Best Krida in 2026

AC Light Dimmer Module Controller ARDUINO RASPBERRY Compatible 50/60Hz 80-240VAC

Auto Detect AC LINE frequency - 50Hz or 60Hz. Device can be controlled via variable resistor !

Compatible with any ARDUINO, RASPBERRY and other MCU. PWM input signal up to 10kHz

Create Custom 110V/220V Ac light show for HALLOWEEN surprise your friends.

8CH AC Light Dimmer Module Controller Board ARDUINO RASPBERRY Compatible 50/60Hz

Compatible with any ARDUINO, RASPBERRY boards.Connected LOAD current for each channel 2A long-term and 5A short-term.

I2C 4 Channel AC Dimmer Compatible With Arduino, Raspberry PI

Works Worldwide AC voltages between 80V-240V. 50hz/60hz. Auto detection build in controller.

Engineered with High Efficiency and used high quality chip companenets

Potentiometer cable（about 15CM） can be separated, with running stop brake function

Suitable for long hours of work:Circuit optimization design,stable

Adjust the motor smooth no noise no vibration,with power indication,wide duty cycle adjustment range

Input supply voltage: 1.8V-15VDC;

The maximum output power: 30W

The maximum continuous output current :2A

L298N main driving chip, high drive ability, small heating value, strong anti-interference capability.

Dual H bridge DC stepper module, more stable and higher work efficiency.

Size: 43 * 43 * 27 mm/1.69 * 1.49 * 1.06in

The input power range is dc6-28v; the maximum continuous output current: 3a; the maximum output power: 80W

The switch cable length 15cm/5.9in

Potentiometer with switch function

Pushbutton Control

44.5mm wide

Manufacturer: Schneider Electric (Telemecanique)

Voltage: 24V;

Frequency: 50/60Hz;

Electrical Connections: 6" Leads;

Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion

Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops.

Compact plastic case and wires connect for easy mount.

Product Name: Overload Protection Switch; Country of Manufacture: CHINA; Material: Plastic, Metal; Net Weight: 14g

Package Content: 1 x Overload Protection Switch; Brand: Assisi; Model: HS-R01

Main Color: Black, Red; Voltage: AC 125/250V 50/60Hz; Current: 20A

The maximum matching 5-axis stepper motor driver

The two-stage signal processing, signal transmission smooth, powerful anti-jamming

Relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc

Package included: 1 x Stepper Motor Driver.

✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.

✿The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.

Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor，2-phase hybrid stepper motors (Outer diameter: 42, 57,86mm).

Package: 1piece DM542

More informations, please refer to the last photo in this link.

【Motor Speed Controller】Ultra-low voltage dc motor governor with the chip model: NE555; Potentiometer with switch function; Use a 2A resettable fuse to protect the controller; Power-on indicator.

【High Performance】Input supply voltage DC 1.8V-15V. Maximum continuous output current 2A. Maximum output power 30W. Duty cycle adjustable 0%-100%.

【Secure Enough】The speed controller is equipped with a self-recovery fuse. When the current is too large, the fuse is automatically disconnected. After cooling, the fuse is automatically restored.

Inside Hole Diameter:10-11mm

Aftermarket Parts

For TTR50 110cc 125cc 140cc 150cc 160cc Dirt Bike Pit Bikes Motocross

5 HP, 220/240V, Single Phase.

Best quality starter with built-in overload adjustable from 22-34 amps.

Manual reset button that can be switched to auto reset.

♕【Technical Parameters】 Input supply voltage: DC 10V-55V; Maximum current: 60A; Continuous current: 40A; Speed range: 0%-100% ; Control frequency: 15KHZ; Apply to: DC Brush Motor

♕【Switch Function】The PWM DC motor speed controller come with switch function. High power speed controller switch which is much more adaptable and convenient to change the motor direction.

♕【Excellent Heat Dissipation Performance】 The enclosure of the speed controller for motor is an aluminum enclosure. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation.

Input voltage: 220V(+/-15%); Output voltage: 220VAC; Input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase.

Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!

Spacing 2.54mm bar connector, 5-pin plug. DC cooling fan low noise, large air volume.

Voltage: AC 110- 220V

Maximum Power: 10000W (connected resistive load,220VAC)

Voltage Regulation: AC 10V to 220VAC

The input voltage must be equal to the rated voltage of the motor.Wide Voltage: Wide voltage input 10-55V, maximum output current 60A,Continuous current: 40A.

Digital display :Motor Rotation Speed Percentage 0~100% ,Accurate adjustment speed.Adjust Output Current Control Motor Speed

Speed Control Knob:Stepless speed regulation ,and with Forward-Brake-Reverse Switch.Only Work for Brushed Motor.

This is single phase VFD with 1 phase INPUT and 3 phase OUTPUT,the power is 2.2KW, 220V,10A, VFD Dimension: 130 x 103 x 200 mm (L x W x H). 🔺🔺Please note: The working environment is relatively humid, with water mist, water droplets or metal objects falling in, which will cause a short circuit.

Input voltage: 220V(+/-15%); Output voltage: 220VAC; Input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase.

Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!

★【Feature】: This motor speed controller uses screw terminals for convenient and quick wiring. Comes with a momentary start/stop switch and a speed control potentiometer.

★【Stable Function】: This simple and easy-to-use DC motor speed controller has an stable performance. Speed controller is made with high quality circuit board which ensures a longer service life.

★【Design】: Designed with a digital display that shows the rate in percentage of actual speed to maximum speed.

【Maximum Power】 10000W resistance load limit power, room temperature for a long time is recommended to be used within 5000W

【Voltage Regulation】AC 10V to 230V (Adjust begin 20V). The original chip is specially customized SCR, all high-voltage capacitors

【Dimensions】130*60*47mm (5.12"x2.36"x1.85"). Weight: 210g (0.46lb)

Fit For Router Fan Electric Motor Rheostat Variable Speed Controller AC 1500W / 120 volt / 15 amps

For use with brush type motors only, Will not work with brushless type motor or soft/slow start motors,Use with centrifugal fans only

Pls confirm the item if it matches your car before you purchase

Very easy to install

Small size & light weight

Excellent start-up torque

2.2KW 3HP 10A VFD Input voltage: 220VAC(+/-15%); Output voltage: 220VAC(+/-15%); Input frequency: 50/60 Hz; Output frequency: 0-400 Hz;Output Current:10A, Input phase: 1 phase; Output phase: 3 phase.VFD Dimension: 100 x 117 x 150 mm (L x W x H).

There is enough space for heat dissipation between electronic components, and the shell adopts porous heat dissipation, which has a longer service life.

Adopting user-friendly keyboard design & reasonable layout, easy to operate; digital display, intuitive and clear. The detachable design is convenient for remote control.

This listing is For Router Fan Variable Speed Controller Electric Motor Rheostat AC 120V Newest

Three settings include off, on (full) and variable. Simple use the dial to increase or decrease fan motor speed. 120 volt/15 amps.

For use with brush type motors only.

1️⃣ 7-80V PWM DC Motor Speed Controller Switch 30A,Motor Speed Control Regulator;PWM frequency: 12KHZ.

2️⃣ Wide voltage 7-80V high current 30A Design Wide range of applications, on-board switch with operation Stop brake function, adjustable potentiometer soft cable can be separated Line length 30CM.

3️⃣Circuit optimization design Wide range of duty cycle adjustment, smooth motor without vibration, no vibration, with power indication, stable circuit design for long working hours.

This motor speed controller supports stop and forward and reverse functions, making it more flexible and convenient to use.

The motor speed controller is made of high-quality electronic components with stable and reliable performance

The motor speed controller is compact and easy to install in narrow space.