Best Livisn in 2026

Adopt PWM speed regulation technology, high conversion efficiency and stable circuit performance. The motor governor conveniently provides continuous current to the DC motor. Speed controller for DC motors. Use the controller's DC motor speed.

A great aftermarket part with premium quality.

According to the original factory specifications, perfect fit in.

Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for

12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water

Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors

Potentiometer cable（about 15CM） can be separated, with running stop brake function

Suitable for long hours of work:Circuit optimization design,stable

Adjust the motor smooth no noise no vibration,with power indication,wide duty cycle adjustment range

L298N main driving chip, high drive ability, small heating value, strong anti-interference capability.

Dual H bridge DC stepper module, more stable and higher work efficiency.

Size: 43 * 43 * 27 mm/1.69 * 1.49 * 1.06in

Input supply voltage: 1.8V-15VDC;

The maximum output power: 30W

The maximum continuous output current :2A

Pushbutton Control

44.5mm wide

Manufacturer: Schneider Electric (Telemecanique)

The input power range is dc6-28v; the maximum continuous output current: 3a; the maximum output power: 80W

The switch cable length 15cm/5.9in

Potentiometer with switch function

Voltage: 24V;

Frequency: 50/60Hz;

Electrical Connections: 6" Leads;

Product Name: Overload Protection Switch; Country of Manufacture: CHINA; Material: Plastic, Metal; Net Weight: 14g

Package Content: 1 x Overload Protection Switch; Brand: Assisi; Model: HS-R01

Main Color: Black, Red; Voltage: AC 125/250V 50/60Hz; Current: 20A

Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion

Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops.

Compact plastic case and wires connect for easy mount.

The maximum matching 5-axis stepper motor driver

The two-stage signal processing, signal transmission smooth, powerful anti-jamming

Relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc

Operating Voltage: DC DC 5V--36V; continuous current 15A at normal temperature; power: 400W; The maximum current can reach 30A under auxiliary cooling conditions.

Trigger signal source: digital high and low level (DC3.3V--20V), can be connected to single-chip IO port, PLC interface, DC power supply, etc., can be connected to PWM signal, signal frequency 0--20KHZ support

Adopt imported dual MOS parallel active output, lower internal resistance, large current, strong power, 15A, 400W at room temperature, meeting the needs of most equipment

Package included: 1 x Stepper Motor Driver.

✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.

✿The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.

【Motor Speed Controller】Ultra-low voltage dc motor governor with the chip model: NE555; Potentiometer with switch function; Use a 2A resettable fuse to protect the controller; Power-on indicator.

【High Performance】Input supply voltage DC 1.8V-15V. Maximum continuous output current 2A. Maximum output power 30W. Duty cycle adjustable 0%-100%.

【Secure Enough】The speed controller is equipped with a self-recovery fuse. When the current is too large, the fuse is automatically disconnected. After cooling, the fuse is automatically restored.

Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor，2-phase hybrid stepper motors (Outer diameter: 42, 57,86mm).

Package: 1piece DM542

More informations, please refer to the last photo in this link.

1order = 4 Pieces

Special features: Relay For FUSION F150

Better Performance

Inside Hole Diameter:10-11mm

Aftermarket Parts

For TTR50 110cc 125cc 140cc 150cc 160cc Dirt Bike Pit Bikes Motocross

5 HP, 220/240V, Single Phase.

Best quality starter with built-in overload adjustable from 22-34 amps.

Manual reset button that can be switched to auto reset.

Works on vehicles with an accessible mechanical throttle cable assembly.

Requires a Rostra control switch- sold separately

Manual trans veheicles may need a clutch switch- sold separately

Voltage: AC 110- 220V

Maximum Power: 10000W (connected resistive load,220VAC)

Voltage Regulation: AC 10V to 220VAC

5 Pin SPDT (Single Pole Double Throw) Bosch Style Electrical Relay.

40A/30A High Switching Capability. These relays have a universal application and can be used in a 12 Volt DC power source, such as automotive setups, car sound systems, security systems, and various other applications.

Pin Specifications: 30V DC. Ground (85), Trigger (86), Output N/C (87a), and Output N/O (87).

♕【Technical Parameters】 Input supply voltage: DC 10V-55V; Maximum current: 60A; Continuous current: 40A; Speed range: 0%-100% ; Control frequency: 15KHZ; Apply to: DC Brush Motor

♕【Switch Function】The PWM DC motor speed controller come with switch function. High power speed controller switch which is much more adaptable and convenient to change the motor direction.

♕【Excellent Heat Dissipation Performance】 The enclosure of the speed controller for motor is an aluminum enclosure. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation.

Input voltage: 220V(+/-15%); Output voltage: 220VAC; Input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase.

Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!

Spacing 2.54mm bar connector, 5-pin plug. DC cooling fan low noise, large air volume.

The input voltage must be equal to the rated voltage of the motor.Wide Voltage: Wide voltage input 10-55V, maximum output current 60A,Continuous current: 40A.

Digital display :Motor Rotation Speed Percentage 0~100% ,Accurate adjustment speed.Adjust Output Current Control Motor Speed

Speed Control Knob:Stepless speed regulation ,and with Forward-Brake-Reverse Switch.Only Work for Brushed Motor.

Very easy to install

Small size & light weight

Excellent start-up torque

This is single phase VFD with 1 phase INPUT and 3 phase OUTPUT,the power is 2.2KW, 220V,10A, VFD Dimension: 130 x 103 x 200 mm (L x W x H). 🔺🔺Please note: The working environment is relatively humid, with water mist, water droplets or metal objects falling in, which will cause a short circuit.

Input voltage: 220V(+/-15%); Output voltage: 220VAC; Input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase.

Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!

★【Feature】: This motor speed controller uses screw terminals for convenient and quick wiring. Comes with a momentary start/stop switch and a speed control potentiometer.

★【Stable Function】: This simple and easy-to-use DC motor speed controller has an stable performance. Speed controller is made with high quality circuit board which ensures a longer service life.

★【Design】: Designed with a digital display that shows the rate in percentage of actual speed to maximum speed.

Fit For Router Fan Electric Motor Rheostat Variable Speed Controller AC 1500W / 120 volt / 15 amps

For use with brush type motors only, Will not work with brushless type motor or soft/slow start motors,Use with centrifugal fans only

Pls confirm the item if it matches your car before you purchase

【Maximum Power】 10000W resistance load limit power, room temperature for a long time is recommended to be used within 5000W

【Voltage Regulation】AC 10V to 230V (Adjust begin 20V). The original chip is specially customized SCR, all high-voltage capacitors

【Dimensions】130*60*47mm (5.12"x2.36"x1.85"). Weight: 210g (0.46lb)

2.2KW 3HP 10A VFD Input voltage: 220VAC(+/-15%); Output voltage: 220VAC(+/-15%); Input frequency: 50/60 Hz; Output frequency: 0-400 Hz;Output Current:10A, Input phase: 1 phase; Output phase: 3 phase.VFD Dimension: 100 x 117 x 150 mm (L x W x H).

There is enough space for heat dissipation between electronic components, and the shell adopts porous heat dissipation, which has a longer service life.

Adopting user-friendly keyboard design & reasonable layout, easy to operate; digital display, intuitive and clear. The detachable design is convenient for remote control.