Best Meirui in 2026

1 Pack Low Profile Picatinny Riser Mounts with 1/2'' of Rise Style, 1 Pack of 1 inch Riser Mount and 1 Pack of 0.83 inch Riser Mount. It's Designed to Lift Your Optics Providing A Clear View Over The Front Sight. Perfect for Mounting Various Red Green Dot, Sights, Scope Rings, Optics, Or More Other Accessories.

Top 3 Slots Picatinny Rail Design, Allowing You Add On Any Standard Picatinny or Weaver Accessories, Such As Red Dots, Micro Red Dot, Microdot, Backup Sights, Scopes, Optics, Flashlight and Other Accessorie.

Precision Machining of Aircraft Grade 6061 Aluminum Alloy + Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Build No Wobble or Rattle.

2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditions

MOTAC (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000+ hour battery life

Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 0 Inches (25. 4 mm) from the base. Sold two rings per package.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.92 inches (23.4 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

Mounting rings are pushed forward 2" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Rear ring is pushed forward 1" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Use this cantilever mount for mounting 1-inch telescopic sights

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

Use this cantilever mount for mounting 30 mm telescopic sights.

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.76 inches (19.3 mm) from the base. Will work with Picatinny and Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0. 95 inches (24. 13 mm) from the base. Sold two rings per package.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.

When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.

This Vortex Tactical Ring positions the center of the riflescope tube at a height of 1.18 inches (30.0 mm) from the base.

UTG Super slim Picatinny riser mount, 0.5" saddle height, 3 slots, 1.57" in length

A fresh new look precision CNC Machined from 6061-T6 aircraft grade aluminum and finished in a matte black anodize

Distinctive scalloped Picatinny slots for snag free accessory mounting

Detachable aluminum rifle scope mount rings

.987" high

1 inch tube diameter

UTG Super slim Picatinny riser mount, 0.83" saddle height, 3 slots, 1.57" in length

A fresh new look precision CNC Machined from aircraft grade aluminum and finished in a matte black hard coat anodize

Distinctive scalloped Picatinny slots for snag free accessory mounting

These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.

Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.

Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Quick and easy way to set up a training course

4 red, 4 yellow and 4 blue 18" diameter plastic rings

Includes convenient storage bag for easy transport

45° ANGLED MOUNT; Mounts to standard picatinny / 1913 / weaver rails

Angled mount provides FAST TRANSITION TO BACKUP OPTIC

IDEAL FOR MOUNTING LIGHTS / LASERS without blocking optical sight

Machined from domestic 6061 T6 extruded Aluminum, Matte Black finish only

Center spread - 3.825", overall length of mount - 6.670", Mauser 98 scope mount does not fit the 3000 L

Picatinny cross slots run the full length of the rail; center channel reduces overall mass of mount

Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting

The cantilever ring mount positions the center of the riflescope tube at a height of 1.435” (36.45mm) from the base.

Made with pride in the USA

Use this cantilever mount for mounting 30mm tubes.

These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base.

Model #177095 - Mark scope mount in size 34mm in Matte finish

For receivers with Mil-Spec 1913 Picatinny rails

Rear ring pushed 1" forward for better eye relief

6061 T6 extruded aluminum + anodized black finish

Model #120181 - Mark 4 Rings 34mm High (Aluminum) with a Matte finish

Compatable with Leupold PRW bases or any other Picatinny-style mount rails

Machined from solid steel

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Compatible with most 9mm - 11mm, flat or rounded, airgun/shotgun dovetail rails

Recoil resistant Stop pin aids in additional zero retention against bidirectional recoil force typical of spring Operated airguns

Precision Machined from aircraft grade aluminum and finished in a matte black hard coat anodize

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

Simplest, most effective way to mount any FastFire sight on a rifle

Allows the FastFire to mount at the optimum height, so the red dot can co-witness with flip-up sights

Fits Weaver or Picatinny-style base