Best Mokaou in 2026

3PCS ST7 TIPS+3PCS ST5 TIPS Compatible with WP25, WP30, WP35, WLC100 SP40 soldering iron

SIZE: OD 0.02inch/6.3MM.Total length 0.17inch/54MM.Tip length0.062inch/19MM

High-quality:Tinned with Lead Free alloy

Soldering Iron Tips: Will fit the SP40L / SP40N ,SP40NKUS series weller soldering iron as well as the weller WP25, WP30, WP35, WLC100 series tools

8 different tips In order to adapt to different welding spot .

High-quality:Tinned with Lead Free alloy .Tin is application smooth.Good thermal conductivity.Bottom diameter 6.35mm

【Heat set insert tips】Its long shank tip perfectly matches the Hakko fx-888d ,Hakko T18 ,Hakko 936,Hakko 937,Hakko 907,Weller SP40KNUS ,Aoyue 937 and Weller ST series.Heat set insert tips sizes include M2 M2.5 M3 M4 and M5 .Do not worry that the corners of the 3D printer are too tight, because when installing the thermosetting insert, it is very easy to contact the 3D printer parts to solve the problem without touching the iron and melting plastic.They are good heat set insert tools

【Heat set insert tools】Installation of soldering tip works better than the soldering iron because the conical tip may get stuck on the insert and accidentally pull out the insert when melting plastic and damaging parts.

【Different heat-set insert tips 】Five kinds of heat-set tips, including M2 M2.5 M3 M4 and M5 Check and measure the right size, and fix the exact size on the equipment model when using.

Kester 24-6040-0027 - (1) Spool, 1 Pound per Spool

Diameter: 0.031" Inch (0.80mm)

Alloy: 60% Tin / 40% Lead (Product contains Halogen)

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

ACCURATE AND DETAILED EKG RESULTS. KardiaMobile 6L records a medical-grade, six-lead EKG and provides FDA-cleared determinations of your heart rhythm in just 30 seconds.

SIX LEADS, UP TO SIX DETECTIONS. Six-lead EKGs give you a more detailed view of your heart and more data to share with your doctor. With KardiaMobile 6L, you’ll have the ability to detect up to six of the most common arrhythmias, including AFib, right on your smartphone. KardiaMobile 6L does not check for heart attack.

TRUSTED BY PROFESSIONALS: Recommended by doctors, KardiaMobile 6L is the world’s only FDA-cleared six-lead personal EKG

EKG ON THE GO: Capture unlimited medical-grade EKGs in 30 seconds and get an instant analysis right on your smartphone. KardiaMobile is small enough to fit in your pocket, so you can take it with you anywhere.

EASY TO USE: Simply place your fingers on the sensors to detect Atrial Fibrillation, Bradycardia, Tachycardia and Normal Sinus Rhythm. Additional detections and features available with KardiaCare subscription. KardiaCare is not included with this product.

TRUSTED BY PROFESSIONALS: KardiaMobile is FDA-cleared and the #1 doctor-recommended personal EKG with more than 100 million EKGs recorded.

Easy-To-Use Adjustable Temperature Control Built Into The Handle

Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste

Fast Release Tool For The Quick-Change Nozzle System

The solder sucker has a large capacity cylinder and silicone tube at the tip for improved suction

[Uses] For solder removal of substrates

Nozzle is heat-resistant silicone tube that will not damage the object

RUTHEX SOLDERING TIPS FOR RUTHEX THREAD INSERTS: The ruthex soldering tips make it even easier to retrofit thread inserts into 3D printed parts of 3D printers from e.g. Anycubic or Prusa.

PRACTICAL CHANGE SYSTEM: Due to the thread in the soldering iron adapter, the soldering tips can be changed very easily WITHOUT completely unscrewing the soldering iron.

INSERTION HELP COMPATIBLE for soldering iron heads 900M and T18 for example for soldering stations SREMTCH, Hakko, LONOVO, RHAEGON, WaxRhyed and other brands. Dimensions of the soldering iron adapter can be taken from the drawing.

Size: length 186 x width 84 mm.

Applicable models: FX-600, FX-601, PRESTO, DASH

Weight: 380 g.

This Weller digital station is 40% more powerful than the two models it is replacing to help get your soldering job done faster

Easy to handle high performance 70W soldering iron with a heat-resistant silicon Cable for safe handling

Temperature stability (+/- 4⁰f, 2⁰c) and temperature lock protects tips and components, affording a consistently high quality process with repeatable soldering results

Trigger-start ignition easily ignites the flame

Versatile webbed flame completes a variety of household projects, including small diameter soldering, thawing, melting and heat application

Use only with propane fuel, such as the Bernzomatic 14.1 oz. Propane Hand Torch Cylinder

TRIGGER START - Trigger start torch for ease of lighting, instant on/off trigger increases fuel savings.

DURABLE - Stainless steel burn tube, cast aluminum body, brass burn tip.

HIGH PERFORMANCE - Pressure regulation allows the flame to burn in any direction and ensures consistent performance.

Perfect match:Perfect match WELLER ST7，OD 1/4" (6.3mm), ID 1/6" (2.9mm),Multiple models can be adapted to different welding spot

High quality material:Precision ground copper tips are plated with iron, nickel and chromium .Tinned with Lead Free alloy,make better heat transfer performance, good ability to hang tin, lifetime is no less than 50,000 welding spots, good replacement tips for Weller ST7 tips.

Wide Compatible:Compatible with WP25, WP30, WP35, WLC100 SP40L / SP40N series soldering iron.

4.5 ft of Low melting point alloy for IC removal.

Easily remove ICs without a Hot Air Station or Hot Air Gun.

Comes in convenient 6.5" lengths with instructions.

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the magnetic plate. Clamp a project (circuits, jewelry, hobby model) securely in place so you can solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 4 magnetic, adjustable 16” and 8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Then move, rearrange and position to keep them steady so you work with accuracy.

WEIGHTED BASE: Rubber feet keep the large powder coated steel 6” x 9” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with precision!

This product is made from high quality materials, and it is designed for lasting performance

Use Hakko for all of your hobby soldering needs and experience the difference

This is for use with FX-8801/907/900M/913

WHEN YOU NEED A HAND: Bolt your PanaVise (not included) to the mount then place the flexible, adjustable gooseneck arms anywhere on the magnetic plate. Clamp a project (circuit board) to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Mount the PanaVise (hardware included) then clip the project to the 360° rotating alligator clamps with locking thumb nuts. Connect, move and position 4 magnetic, adjustable arms to the steel base so you work with ease.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 4.6 lb heavy base from sliding and stable. Wherever you stick the arms - the oval base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the XL magnetic plate. Clamp a large project (circuit board, jewelry, drone) securely in place to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 5 magnetic, adjustable 16”/12”/8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Move, rearrange and position to keep them steady so you can work with accuracy.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 8.5” x 11” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

【Multi-Function】Silicone work mat built-in scale ruler (0 ~38 cm/0~15 in), 124 screws position and 3 pcs magnetic parts areas and 18 notches to classify precision parts,which improve your work efficiency and make the maintenance platform cleaner and tidy.

【Heat Insulation】Heat insulation mat can resist the temperature as high as 500℃ and is anti-corrosive also,Its texture is soft, supports high temperature soldering work directly, which can protect maintenance platform from damage.

【Anti-Slip】Both surface and back side are adopting the anti-slip design, it won't slide around on your counter or station, and its attractive design keeps small parts from sliding, which prevent them from losting or misplacing.

T18-D08 - 0.8 x 14.5mm

T18-D12 - 1.2 x 14.5mm

T18-D24 - 2.4 x 14.5mm

Cleans better than conventional sponges

No water required

Will not reduce the tip temperature

Third Hand' workshop handyman vice – Ideal for Soldering station, Soldering iron station, Circuit board holder, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts. Multiple adjustable magnetic metal gooseneck arms and stainless steel precision crocodile/alligator tip clamps, with 360-degree rotation. They are strong to keep a tight grip on your components allowing you to position them wherever you like.

Weighted base and Anti-Split rubber feet - Our soldering stand/soldering tools have solid weighted steel construction, power coated with industrial-grade rubber feet ensure a stable base that does not move. Our rubber feet protect your work surface against scratches and scuffs.

Stainless steel alligator clamps - can be rotated 360 degrees then "locked" into place with knurled thumb nuts. 2lb weighted base prevents tips and turns, holds everything steady.

12 grams each / 10 per pack

Used for cleaning soldering tips

Material Composition: 100% brass

Soldering Gun Tips 7135W

For Models: 8200

Soldering tips

Package Height: 2.54cm

fits 8200 and 9200 solder guns

Package Height: 2.54"

HOW HAVE YOUR SURVIVED WITHOUT THEM: Our third hand/helping hands soldering stand is essential for every workshop, solder station, and craft room. Ideal for soldering, circuit board holding, assembly, repair, fishing lure, hobby, jewelry, and crafts. 4 adjustable metal gooseneck arms and stainless steel precision alligator clamp tips. 360-degree rotation. The tight grips are strong enough for you to position your hard-to-hold items freely.

KOTTO KNOWS WHAT YOU NEED: We are engineers creating high-quality and effective tools because we use them too! That's why our soldering helping hand tools have a weighted base and anti-slip rubber feet, making these soldering tools one of the sturdiest on the market. We engineered it this way to ensure a stable soldering iron station that does not move. The rubber feet protect your work surface from scratches and scuffs.

EVERY DETAIL COVERED: We love tools! You might say we are obsessed. That’s why we engineer quality into all Kotto products right down to the smallest detail. The alligator clamps on this multifunctional helping hands soldering station tool are made of stainless steel. Our thoughtful design allows the alligator clips to be easily rotated 360 degrees and remain strong enough to hold larger projects in place.

Performance: Fast 15-second heat-up time from 212˚F to 650˚F

Easy to Use: Adjust your temperature display (°F or °C), preset temperature or set to standby mode

Precision and Control: Ergonomic molded pencil-grip provides optimal comfort