Best Skouphy in 2026

3D Printer Intelligent Touch Screen: Open UI design software supportsyou to control your 3d printer with a 4.3-inch full-color screen with a user-friendly interface and responsive touch control. It is a good upgrade for your original Ender-3, and Ender-3 Pro 3D printers.

Intelligent UI Create Customized Interface: Create Customized Interface，Open UI design software , support self-defined UI interface, create exclusive and unique UI style by your inspiration,and enjoy interactive 3d printing experience.

Resume Printing: Coming with a filament sensor, stop printing when the filament runs out. Continue printing after power is restored.

Compatible with 500g, 1kg, 3kg, 5kg material racks.

High Stability: The feeding seat is rotated by the bearing to avoid flaming paper jams and entanglement, which makes feeding more smooth.

Exquisite Craftsmanship: The entire frame of the 3D printer paper feed bracket is composed of thin sheets of metal and is integrally cast to ensure long-term durability and the stability of the material rack.

【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC.

【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch.

【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint.

3D printer filament (1.75mm diameter, red; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)

Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish

Engineered to reduce jamming

Compatible with ELEGOO Mars 3 and Mars 3 Pro Resin 3D printer.

Film dimensions: 146*195mm, Film thickness: 0.127mm. Note:Please remove the double-sided protective film before use.

Compared with FEP release film, PFA release liner film has higher temperature resistance and printing success rate, and less release tension for easier to remove models.

Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly

2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs

Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow

GREAT VALUE: sharp quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!

Anti-Static, Non-Magnetic CURVED PRECISION TWEEZERS; 3D printing tweezers great for nozzle maintenance and cleaning excess support material

10 pcs of 0.40mm diameter FLEXIBLE stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears

Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying

Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them

Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per Spool; Vacuumed Sealed with Desiccant; Recommended extruder temperature:195 - 230°C; Recommended platform temperature: 40 - 60°C

SainSmart TPU filament is renowned for its high quality and ease of use, offering you a flexible and strong parts with consistency and smooth finish.

Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including SainSmart x Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.

【4K Monochrome LCD】6.6-inch 4K monochrome LCD screen with a replaceable anti-scratch tempered glass with 9H hardness for a better light transmittance at 4098 x 2560 high resolution, protecting the screen while restoring model details to the greatest extent.

【Powerful COB Light Source】Upgraded free-form surface COB lens consists of 36 highly integrated UV LED lights, paired with Fresnel lens to deliver an even beam of 405nm wavelength for a more smooth surface finish and incredible printing quality.

【Large Build Volume】With a large build volume of 143.43×89.6×175 mm³ (5.647×3.52×6.8 in³), you can print one large model or undergo batch printing in a single job, which saves your time and greatly improves your productivity.

【10" 8K Monochrome LCD】ELEGOO Saturn 2 Resin 3D Printer adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680x4320 and an ultra-fine XY resolution of 28.5 microns, outputting outstandingly detailed 3D models with a cure time of only 1-3s per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness for better light transmission and protection.

【43% Larger Printing Volume】With a build volume of 219x123x250mm / 8.62x4.84x9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.

【Fresnel Collimating Light Source】Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with free-form surface COB lens and FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength with 92% light uniformity, excellent printing accuracy, and a more smooth surface finish.

【Higher resolution and output】Mars 3 is ELEGOO's first desktop mSLA 3D printer with super-high precision. It adopts a 6.66 inches mono LCD with Ultra 4K HD resolution, which has a 30% higher XY resolution at 35μm and 37% higher build volume than Mars 2, delivering amazing 3D prints.

【The release film 2.0】With less release tension, the small and thin supports added to your model will be well-protected. Mars 3 has a greatly improved success rate when printing 3D models with lots of details.

【Upgraded light source】 36 highly integrated LED lights with a brand new COB lens that has a free-form surface can deliver over 90% uniformity of UV light illumination , making the printing accuracy upgraded to another level.

【Intelligent Time Control】The LED time display enable you to control the curing time conveniently.

【Light Driven Turntable】The light driven turntable is able to absorb UV light to rotate without battery.

【Reflective Sheet】There is reflective sheet inside the cabinet which have the lights focused to get a better curing effect.

Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.

Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.

The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. NOTE: It can't be used to cure liquid resin directly and can't cure filament prints.

The 360° rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can't use batteries for power.Maximum display /rotate weighing less than 500g/1.1Pound which is also suggested size that the light can cure. TIPS: Close to light will help to speed up and rotate heavier.

The resin can be cured in 10-15 seconds from a distance of 5 cm from the light. NOTICE: thicker parts require more time to cure. What's more the dimension of the UV light is 3.35*4.53*3.74" and the turntable diameter is 3.5".

Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.

Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro.

Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.

Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm.

Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones.

SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones.

UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.

STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.

EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.

🎈【Quality Assurance】100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.

🎈【Work Better】Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.

🎈【Improved Performance】The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.

Original resin tank used for ELEGOO MARS 3 PRO resin 3D printer, and the PFA release liner is pre-installed.

Made of aluminum alloy, chemical corrosion resistance, not easy to deform, and durable for long-term usage, you don't need to worry about changing your resin vat frequently.

The metal resin vat with screws to fix it in place, and the feet on the bottom to keep the PFA release liner from making contact with your workbench.

WORKS ON MULTIPLE FILAMENTS: works great for ABS, PLA, PETG, HIPS, and TPU

WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton

EASY USE: applying Magigoo is as easy as child's play. Shake, press, apply to an active printing area. Magigoo welds to the 3d build plate bed seamlessly and stops prints from warping. Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled & Magigoo is easily cleaned with water

Made of high quality materials, non-toxic, tasteless and easy to use.

Suitable for 3D printer and engraving machine screw, optical axis, guide rail, and other transmission systems.

Anti-rust, smooth function. Silent work, protection for 3D printer.

Electrifying and intense, solid neon colors inject excitement and inspiration into designs. Enliven your work with these neon color filaments.

Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per spool; Vacuumed sealed with desiccant; Recommended extruder temperature: 200- 220°C; Recommended platform temperature: 40 - 60°C

SainSmart TPU filament is renowned for its high quality and ease of use, offering you flexible and strong parts with consistency and smooth finish.

PC4-M6 Fittings：thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm

PC4-01 Fittings：thread about 1/8, The upper parts can be inserted into 4MM pipe and self locking,the lower screw thread is 1/8 teeth

PC4-01 Fittings:Silver; PC4-M6 Fittings; Gold

100% Creality Original--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.

Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

【300°High-temp Nozzle】Upgraded brass nozzle can stand up to 300°printing temperature and it is compatible with multiple filaments such as PLA, ABS, PVA, Wood, TPU, PRTG and PA which providing more possibilities for creation.

【Sprite Dual-Gear Direct Drive Extruder】Compatible with more filaments, Ender 3 S1 Pro 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

【4.3 inch Touch Screen】The 4.3-inch touch screen supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes.

<b>Great Value: </b>Total 27pcs include: 12pcs 0.4mm stainless steel needles,12pcs 0.35mm copper needles, 2pcs different shape precise tweezers, 1pc plastic bottle, Excellently cleaning 3d printer filament clog

<b>Good Performance Needles:</b> The Needles are flexible, won't break, twist easily, this drill bits will clean your printer nozzles and other small parts: throat, feeder gear perfectly

<b>High Quality Tweezers:</b> It include 2 different shape of precise tweezers, great for nozzle maintenance, cleaning up extruder hot ends and cleaning excess support material (PLA/ABS filament).

Very easy to take off the models, NO tools to remove models

Use clips to fix the glass plate on the hot bed.

Higher temperature higher sticky. The models will stick on bed firmly when temperature is high

Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.

High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.

0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.

WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.

ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.

EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.