Best Tools & Harware in 2026

High activity

Chemically compatible with most solder masks and board laminates

pH Neutral Chemistry

Protect lighting, heating, and other circuits not subject to temporary surges and where available ONE-TIME fuses do not have a time delay feature and thus should not be specified in circuits where For general purpose circuits, size at ampere rating of circuit For motor circuits, size at 300% to 400% UL Listed - 250Vac: Class K5 (0-60A), Std. 248-9

Cooper Bussmann

Kester 24-6040-0027 - (1) Spool, 1 Pound per Spool

Diameter: 0.031" Inch (0.80mm)

Alloy: 60% Tin / 40% Lead (Product contains Halogen)

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

√ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire

√ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37)

√ Flux content 1.8%，electrical soldering wire dia is 0.8mm (0.0315inch)，gross weight 50gram (0.11lbs),good size for pocket

(1) Kester 24-6040-0061 Spool, 1 Pound per Spool

Diameter - 0.062"Inch (1.50mm)

60% Tin / 40% Lead (Product contains Halogen)

Specially repackaged by TekLine Supply

1-Ounce pocket size pack contains approx 27 feet of solder!

67/37 Tin/Lead is most common for electronics work

(1) Kester 24-6337-0027 Spool, 1 Pound per Spool

Diameter - 0.031"Inch (0.80mm)

63% Tin / 37% Lead (Product contains Halogen)

The solder sucker has a large capacity cylinder and silicone tube at the tip for improved suction

[Uses] For solder removal of substrates

Nozzle is heat-resistant silicone tube that will not damage the object

Size: length 186 x width 84 mm.

Applicable models: FX-600, FX-601, PRESTO, DASH

Weight: 380 g.

Easy-To-Use Adjustable Temperature Control Built Into The Handle

Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste

Fast Release Tool For The Quick-Change Nozzle System

Superior fluxing ability

Instant wetting

After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant

TRIGGER START - Trigger start torch for ease of lighting, instant on/off trigger increases fuel savings.

DURABLE - Stainless steel burn tube, cast aluminum body, brass burn tip.

HIGH PERFORMANCE - Pressure regulation allows the flame to burn in any direction and ensures consistent performance.

Novacan Old Masters Flux

All-purpose zinc flux

Cleans up easily with water

EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder

POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate

PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project

Gel eliminates erratic operation with a film that will not clog orifices and threads on MIG nozzles and contact tips

Suitable for use on fixtures of semi and automatic welders

Odorless, non-flammable, non-toxic and silicon free

Wire Diameter: .031"

Alloy: 60% Tin / 40% Lead

Core Size: 66 (3.3% by weight)

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the magnetic plate. Clamp a project (circuits, jewelry, hobby model) securely in place so you can solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 4 magnetic, adjustable 16” and 8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Then move, rearrange and position to keep them steady so you work with accuracy.

WEIGHTED BASE: Rubber feet keep the large powder coated steel 6” x 9” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with precision!

WHEN YOU NEED A HAND: Bolt your PanaVise (not included) to the mount then place the flexible, adjustable gooseneck arms anywhere on the magnetic plate. Clamp a project (circuit board) to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Mount the PanaVise (hardware included) then clip the project to the 360° rotating alligator clamps with locking thumb nuts. Connect, move and position 4 magnetic, adjustable arms to the steel base so you work with ease.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 4.6 lb heavy base from sliding and stable. Wherever you stick the arms - the oval base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the XL magnetic plate. Clamp a large project (circuit board, jewelry, drone) securely in place to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 5 magnetic, adjustable 16”/12”/8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Move, rearrange and position to keep them steady so you can work with accuracy.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 8.5” x 11” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

【Multi-Function】Silicone work mat built-in scale ruler (0 ~38 cm/0~15 in), 124 screws position and 3 pcs magnetic parts areas and 18 notches to classify precision parts,which improve your work efficiency and make the maintenance platform cleaner and tidy.

【Heat Insulation】Heat insulation mat can resist the temperature as high as 500℃ and is anti-corrosive also,Its texture is soft, supports high temperature soldering work directly, which can protect maintenance platform from damage.

【Anti-Slip】Both surface and back side are adopting the anti-slip design, it won't slide around on your counter or station, and its attractive design keeps small parts from sliding, which prevent them from losting or misplacing.

1 Troy Once (31 g), 1/16" Thick

56% Silver, 22% Copper

17% Zinc, 5% Tin

Package Dimensions: 6.223 cms (L) x 6.731 cms (W) x 6.223 cms (H)

Product Type: Electronic Component

Package Quantity: 1

Industry standard for decades

Excellent solderability to a wide variety of metallization's

High activity rosin core formulation

4.5 ft of Low melting point alloy for IC removal.

Easily remove ICs without a Hot Air Station or Hot Air Gun.

Comes in convenient 6.5" lengths with instructions.

The Package Length of the Product is 14.478 centimeters

The Package Width of the Product is 10.921 centimeters

The Package Height of the Product is 3.048 centimeters

All-purpose flux specially formulated for stained glass use

Includes an application brush! Goes on easy without being runny or sloppy.

Completely water-soluble, making clean up quick and easy

Solidly-Built Powerful Soldering Station: the YIHUA 939D+ Soldering System is made for those who solder regularly. It’s so reliable that even industrial-level factories use this soldering station for over 10 hours every day for manufacturing. This station comes with high power performance, flexible temperature from 392°F to 896°F, faster heating up, enhanced temperature stabilization and enhanced performance. Get your soldering projects DONE with this capable & reliable 939D+ system!

Safety and Precision Matter: the professional-grade built-in transformer outputs contact-safe voltage without sacrificing its high power or performance. The system’s exclusive intelligence temperature control program monitors, and compensates in 20 milliseconds to keep the temp. stabilized and give you a consistent soldering experience. This is ideal for professional soldering, industrial & manufacturing, precision electronics, school labs, household & hobby uses, electronic DIYs & repair, etc.

Metallic Build & Heat-Resistant Design: the Yihua 939D+’s control panel is built with Brushed Aluminum so that you won’t leave any burnt marks by accident. The accompanying stand-alone iron stand is also solid metal-alloy. You can put it anywhere and organize your workspace in the way you like.