Best Resume Function 3D Printers in 2026

【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC.

【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch.

【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint.

Improved Structure with Safe Power Supply: The lightweighted new structure made Aquila C2 easier to carry and operation, also it comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.

Resume Printing Function: Aquila 3D printer could automatically resume printing when power comes on. It won’t print from scratch once meeting filament breakage, saving time and avoiding waste.

Semi-Assembled Kit: The easy-to-setup kit comes partially assembled, enabling you to learn about the basic construction of 3D printers as you finish putting it together.

Upgrade Auto Leveling: ANYCUBIC Vyper is one of the very few 3D printers that has auto leveling feature, the intelligent leveling system equipped with 16-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate.

Large Printing Size: ANYCUBIC Vyper 3D Printer comes with a large build volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 24.5 x 24.5 x 26cm, which leaves enough space and freedom to fully realize your fantastic creativity.

Fast and Stable Printing: Compared with ordinary 3D printers, Vyper's max printing speed can reach 7.1 in/s / 18 cm/s, which save more time on waiting. High-precision double screw design makes printers run more stable operation and the patented Z-axis can avoid print layer marks, greatly improving the printing details and precision.

Dual-Gear Direct Drive Extruder: Compatible with more filaments, Ender 3 S1 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed.

Removable Spring Steel Print Sheet: Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet.

✅ 【Large Size & Direct Drive Extruder】Compared with Finder 2, the build volume of Finder 3 is increased by 270%. It increases the success rate of a perfect first layer and offers stronger compatibility and wider application range.

✅ 【260℃ High Temperature Nozzle & Support Various Filament】High filament compatibility. More printing possibilities. Finder 3 3d printer shows great performance on 3d printing PLA/ABS/HIPS/PETG/PETG PRO/TPU 95A and etc.

✅ 【Glass Platform & PEI Magnetic Build Plate】Good adhesion to the printed model and enables fast heating up of the heat bed. The build plates is not only durable but also flexible. Once the printing completes, users can remove the printed model effortlessly.

【Upgraded Dual Blower Kit】Equipped with the dual blower kit, the filament can be cooled quickly after extrusion so that the model is not prone to deformation or wire drawing, which will be better for printing.

【90% Pre-assembled with Stable Triangular Structure】The Upgraded Longer LK5 Pro 3d large printer is 90% Pre-assembled with build size of 300*300*400mm. Plus the reinforced design of diagonal rods form a stable triangular structure, which can effectively reduce vibration and achieve more stable printing.

【Silent and Open source Motherboard】Backed by TMC2208 ultra-silent driver, it demonstrates firm properties as well as reduces noise. With open-source firmware, you can try your fantastic ideas on LK5 Pro by changing the G code. BL touch installation is also provided (not included in the package).

🎄【Fully Assembled】Out of the box, the user-friendly beginner 3D printer is easy to operate with 2.4" LCD Display. Come with a sample PLA filament roll and a Micro SD card that has multiple model files, you can instantly enjoy the world of 3D printing.

🎄【Auto Bed Leveling】WEEFUN mini 3D printers don't need manual adjustments, one-touch auto-leveling for more simple and more precise printing. It's a good choice for beginners and children.

🎄【Pause & Resume Printing】WEEFUN 3D printers with sensor detection can resume printing after suffering power outage or any other unexpected stoppage. Just one click to easily resume from the memorized position.

CR-TOUCH AUTO BED LEVELING: official Creality ender 3 v2 neo equipped with the accurate and reliable CR-Touch, featuring precision, stability and reduced cost. CR-Touch gathers the bed deviation data by touching multiple points in the bed and compensating for them accordingly,allowing for hassle-free bed leveling. Enhanced Accuracy with CR Touch. Self developed 16-point automatic print height's compensation, ensuring the leveling accuracy.

UPGRADE METAL BOWDEN EXTRUDER: Different from ender3, ender 3 pro and ender 3 v2, this new-released 3d printer auto-leveling comes with metal bowden extruder, which is more durable and has more extrusion force than plastic extruders

BRAND NEW 4.3 INCH UI USER INTERFACE: The Upgrade Ender-3 V2 with CR-Touch which upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for customers. Which is convenient for you to know about the model status. Also, it supports nine languages for different customers demand.

【CR Touch Auto-leveling】：The CR touch of Ender-3 neo will take 16-point measurements of the printer build surface and the intelligent leveling system can automatically compensate for the printing height of different points of the heat bed. Accurate and easy to handle.

【Smooth Feeding】: The full-mental Bowden extruder of Creality printer is more durable. The stronger extrusion force enables smooth feeding.The corrugated heat sink enlarges the radiating area. Quick heat dissipation vastly reduces the risk of tube blockage.

【Durable Printer Build Surface】: Alloy steel mold springs of good toughness give better support to the 3D printers platform. Carborundum build surface effectively reduces the warping issue with even heating.Strong adhesion of platform ensures the stability and quality of the print.

【Upgraded Dual Blower Kit】Equipped with the dual blower kit, the filament can be cooled quickly after extrusion so that the model is not prone to deformation or wire drawing, which will be better for printing.

【90% Pre-assembled with Stable Triangular Structure】The Upgraded Longer LK5 Pro 3d large printer is 90% Pre-assembled with build size of 300*300*400mm. Plus the reinforced design of diagonal rods form a stable triangular structure, which can effectively reduce vibration and achieve more stable printing.

【Silent and Open source Motherboard】Backed by TMC2208 ultra-silent driver, it demonstrates firm properties as well as reduces noise. With open-source firmware, you can try your fantastic ideas on LK5 Pro by changing the G code. BL touch installation is also provided (not included in the package).

🎁【Smart APP Wireless Printing】 Fully assembled 3d printer, out of the box. Compact TINA2S 3D printers with self-developed APP "Poloprint Cloud", which has massive models library, realize the smartphone or tablet intellegent online one-click slicing and wifi cloud printing, no tedious operation, an ideal gift for men, women, beginners, teens, kids, etc.

🎁【Fully Open-Source】Tina2S mini 3d printer is compatible with Wiibuilder, Cura, Kiri(Chrome book), PrusaSlicer software, you can diy your own models and fast upload to print on computer, as well as support USB transfer. Fully open source supports command edditing, etc. (Firmwares can be taken from our wiki)

🎁【Quiet-Print Enviroment】WEEFUN Tina2S small 3d printers is built in self-developed motherboard for ultra-quiet printing(40~50dB), faster print speed up to 200mm/s, 8 times CPU running level increase.

<b>200mm/s High Speed Printing & 2800+ mm/s² acceleration & Three Axis Linkage Technology; Equipped 3 x 48W High Power stepper motor and Three axis linkage technology support a normal printing speed of Flsun Super Racer （SR） 3D printer up to 200mm/s and 2800+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 200% faster than industry standard, enable you save more than half of printing time.

<b>Φ260X330mm Large Printing Size; Large printing volume Φ10.2"（Diameter）x 13"(H) / 260 x 260 x 330mm.

<b>Linear Rail Guide; High-precision linear rail guide, providing higher printing accuracy and stability, and lower noise.

Auto Bed Leveling Pre-Installed - You just plug them in and start printing! It can precisely measure the tilt of the Bed surface, offers the automatic compensation for Z-axis for unevenness of the platform plate, easy to solve the printing failure caused by the unevenness of the platform and provid reliable operation with all build surfaces.

Ultra Large Printing Format - Meet more of your printing requirement. Your idea should not be confined. Achieve better print results and a larger print model at a time. Cube FrameBox design with overhead gantry.A plus size and upgraded version of Ender-5 printer.

Solid Cube Frame - Dual Y-axis synchronization and equipped with a 42-48 motor. Strong power support and smoother transmission lexible and reliable. Dual Z-Axis Lead screw drive smoothly and steady.Movement of the build plate will be more stable.

【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the ability to print up to 500x500x500mm in size. Create more impressive models, print larger pieces and upside your designs

【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence Sensor. CR Touch performs multi-point detection on the printing platform and records the height data of each detection point. The system constructs a virtual plane based on the height data of each point and calculates the flatness of the printing platform, and the system automatically compensates for printing at different points.

【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw models.with All-aluminum coupling and a stepper motor, Double Z structure runs smoothly.Easily improve 3D printers with low cost efficiency to Dual Z axis mode.

Smart G-sensor Auto Leveling: Supports gravity sensing conduction leveling. This provides more accurate leveling, higher detection sensitivity, and using software optimization, more precise compensation in printing, making the model more accurate.

Modular Design FDM 3D Printer: Our new generation of 3D printer integrates the functions of 3D printing, laser engraving, suitable for DIY home school. Compatible with PLA/PLA+/ABS flexible filament. When using laser engraving, supports bamboo, ceramic tile, wood, leather, and kraft papers for carving.

Ultra Fast Cooling & Supports Night Mode: LOTMAXX Shark V3 stays cool while printing, thanks to its modular nozzles' unique and signature design. It offers the unique possibility to achieve dual color printing effect by switching filaments. Shark V3 also supports night mode, with LEDs on the print head to light up dark rooms.

【95% Pre-assembled with Upgraded 2 in 1 Out Hotend】 With a full-metal body, stable and durable. 95% preassembled already, just need to install the gantry, filament holder and the touchscreen effortlessly and get ready within 5~10 minutes. Support two-color printing, switch between two filaments when printing, and extrude through a nozzle. Provides high speed and stable print quality. Larger Build volume (mm) 280 x 240 x 300 (one color), 240 x 220 x 300 (two colors).

【External Laser Engraving Module】 Sovol SV01/SV02 3D printer can be used with laser kits (not included) to expand the laser engraving function. Please purchase it according to your needs. Supports engraving with a wide variety of materials like wood, plastic, leather, PVC, paper, resin, etc.

【Silent Motherboard TMC2208 & Meanwell Power Supply】 Works more quietly, provides excellent stability and protection for SV02. Marlin 2.0 firmware and bootloader preinstalled. With safety warning system of Thermal Runaway Protection, against lose control of temperature. A stable and sufficient power supply protects your printer from unexpected voltage peaks. Safer and more reliable.

【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform traditional single-nozzle printing, but also perform ultra-precise dual-color duplication printing, mirror printing, and printing two products at the same time. It can also print water-soluble supports, and the two nozzles can print different consumables!

【Upgrade borosilicate glass bed】：TENLOG's upgraded borosilicate glass bed allows the printed product to adhere better without warping. Even the first layer is super soft, and the model can be picked up by hand after cooling.

【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print with a custom height.

【Smart Auto leveling 】With convenient one-botton auto leveling, the printer can adjust the height of the nozzle and the heating bed to the same level within 5 minutes, which greatly saves leveling time and makes you the first step towards successful model printing.

【Easy and Fast Assembly】With 95% pre-installation and our detailed assembly Video, it takes you only 10 minutes to assemble the printer, which is convenient for users and beginners.

【Ultra-Quiet Running】Equipped with a 32-bit silent motherboard and TMC2208 ultra-quiet driver,which can effectively reduce the noise of the stepper motor, Mizar Pro running sound as low as 47db, just to create a quiet environment for you.

✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents.

✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully

✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .)

CR TOUCH FOR EASIER LEVELING: The auto-leveling 3D printer end 3 Neo is suitable for home use, and the self-developed CR Touch makes leveling easier and more accurate by adjusting the height between the nozzle and the platform to automatically level.

SMOOTH FEED: The more powerful all-metal extruder allows for smooth feed, reducing the risk of nozzle clogging.

ENJOY SILENT PRINTING: The creative 3D printer Ender-3 Neo is suitable for beginners, with a silent motherboard, low decibel impact on learning or working less, creating a comfortable printing atmosphere.

<b>Save More Than Half of Printing Time; Flsun Super Racer 3D Printer normally 200mm/s high speed and high precision and stability printing, 2800+ acceleration.

<b>Large Printing Volume; 10.2"(L) x 10.2"(W) x 13"(H) / 260 x 260 x 330mm.

<b>Linear Rail Guide & Three-Axis Linkage Technology; High-precision linear rail guide and Three-Axis Linkage Technology , providing higher printing accuracy and stability and printing speed, and lower noise.

🎄【Fully Assembled】Out of the box, the user-friendly beginner 3D printer is easy to operate with 2.4" LCD Display. Come with a sample PLA filament roll and a Micro SD card that has multiple model files, you can instantly enjoy the world of 3D printing.

🎄【Auto Bed Leveling】WEEFUN mini 3D printers don't need manual adjustments, one-touch auto-leveling for more simple and more precise printing. It's a good choice for beginners and children.

🎄【WiFi Cloud Printing】Smart Wi-Fi cloud printing can easily control prints by computer or mobile phone with Wiibuilder slicer software or PoloPrint Pro app. This 3D printer machine is fully open-source, compatible with Cura, Simplify3d and Slicr3r slicing software.

【Large Size & Fast Printing】Compared with Adventurer 3, the print volume of Adventurer 4 is increased by 325%, the print speed is increased by 50%. It also adopts dual Y-axis design and Z-axis reinforcement to improve the print quality.

【Leveling-Free & Flexible CNC Platform】Out of the box, with a platform made of CNC mounting base-level and an 8.0mm ultra-flat aluminum plate, Adventurer 4 ensures great print quality and a high success rate. Simply bend the platform to take down models in 5 seconds.

【HEPA13 Air Filter &1Kg Filament Spool Holder】Equipped with HEPA13 air filter that caneffectively eliminates 99% of TVOC powder, and activated carbon filter odor. Built-in 1KG filament spool holder, no need external bracket anymore.

High Race 3D Printer & Superior quality; V400 maximum printing speed is 400mm/s which saving more than 70% of the printing time; Double linear guides ensure unparalleled stability; smoother and more precise

Amazing Build Colume & Direct Drive Extruder; With an extraordinary print size of 300 x 410 mm; The hotend and the extruder housing have been combined, resulting in compact and lightweight system

High Temperature Nozzle & Various Filament; A bi-metallic heatbreak allows you to print up to 300 °C, which ensures widely filament compatibility; such as PLA ABS WOOD TPU PC and etc.

Accuracy - This fifty-five pound machine is the ultimate powerhouse in precision printing; It has 0.05mm layer resolution.

Speed - An acceleration speed of 3000mm/s2, the Pro EVO will have you working on your next project in minutes.

Calibration - Pro EVO calibrates itself under four minutes with 440 touch points. It features an auto-calibration mode that detects the position of the extruder and the print bed for superior accuracy when printing.

Easy Assembly: Assembly is a breeze using our easy to understand, step by step assembly and operating instructions. If you're still having trouble, help from our friendly and knowledgeable Tech Support Associates is just an email or live chat away!

Print Large Or Multiple Models: The large, 220 x 220 x 250 mm build area allows you to print larger objects or to print several smaller objects at the same time.

Easy To Use Menu Interface: Menu navigation and operation is simpler and easier with the color 4.3" LCD touchscreen than with interfaces that buttons or knobs, like those found on many other 3D printers.

【Multi-color Printing】The printer's 4 extruder modules and 4-in-1-out hot end deliver 4 types of printings--single color, double color, four color and mixing color, which will greatly enrich your 3D printing experience. One-button switching mode makes monochrome conversion into multi-color easier.

【Quick Self-Assembly】The 3D printer is 70% pre-assembled, boasts a modular design that makes it easier to assemble, and swapping the wires in and out of the extruders a cinch.

【Breaking-Resume Function】 Its smart sensor can automatically resume the printing job exactly at the same place where it has been stopped after power-off or filament breakage. This function totally drives away the hassle of repetitive and time-consuming printing jobs caused by unexpected power outage.

[Rapid Heating Bed]The carbon crystal silicon glass plate provides a strong adhesion, heating in 5 mins, and the printing model will not easily become warped.

[Resume Printing Function]Aquila can resume printing after power outage or any other unexpected stoppage,save time and filaments.

[Semi-Assembled Kit]This easy-to-setup kit comes partially assembled, also it comes with removable build surface plate.