Best Led Automotive Replacement Pushbutton Switches in 2026

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel High Round Pushbutton Switch; Voltage: 250V, 5A. Hole size required: 0.74''/19mm

19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Features: "O I" marked on black button 12V Rocker Switch with 5 sets of wires(#187 Lock Terminals on end) for switch easy connection.

Material: The KCD1 Small round rocker switch is made of nylon PA66. The terminals are made of brass with silver plated.

Function: The ON/OFF rocker switch is 2 pin SPST design (single pole single throw) ON OFF. The rating is 10A 120V AC and 20A 12V DC.

Operating Current: 6 (A)

Operation : Push-On, Push again-Off, SPST switch

Rectangular Base Measures: 17 x 14mm (0.67" x 0.56")

★ <strong>PERFECT FIT</strong> ★ This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car, simple to install. Gives your vehicle an upgrade with this factory look switch.

<strong>★ HIGH QUALITY ★ </strong>Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that lights up when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/LOWER Letters. Easy for you to know the working status.

<strong>★ STURDY DURABILITY ★ </strong>The switch is made out of heavy duty ABS plastic and they come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles and ensure years of service. Safe and long lasting.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4''/19mm

19mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO

This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car or truck

Etched directly onto the switch face using modern high tech engraving equipment to ensure long image life (This one is Blue. White & Green avaiable)

Black hard surface rocker, made out of heavy duty ABS plastic, surface size 1.54" x 0.83"

1.Feature: This 12 volt push start button is momentary SPST design. The momentary push button switch with a black neoprene cover can prevent water, moisture and dirt.

2.Size: The height of the starter switch is 2.46 inch(without cover), the diameter of the starter button is 1.1 inch. The reqiured mounting hole of the horn button switch is 5/8 inch(0.625 inch).

3.Voltage: The rating of this waterproof engine start button is 50A 12v.

Momentary Switch With Dust Cover

Heavy Duty Waterproof Construction - 12 Volt / 50 Amp

Universal - Starter / Horn Switch

Push Button Switch Dimension: This pushbutton with require 3/4''(19mm) diameter Panel Mounting Hole Size. The 2mm Raised Button for easy operating.

Momentary Push Button Switch rating: 5A 250VAC; 10A 110VAC; 10A 12V DC, with Screw Terminals, easy to contact wires. Durable: More than 50,000 Cycles Long electrical life.

Black Horn Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

★ <strong>PERFECT FIT</strong> ★ This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car, simple to install. Gives your vehicle an upgrade with this factory look switch.

<strong>★ HIGH QUALITY ★ </strong>Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that lights up when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/LOWER Letters. Easy for you to know the working status.

<strong>★ STURDY DURABILITY ★ </strong>The switch is made out of heavy duty ABS plastic and they come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles and ensure years of service. Safe and long lasting.

➤This is a unique SPST ON/OFF Push Button switch developed specifically for the pursuit of individuality and perfection in you.

➤Easy to controll the circuit power on/off，DIY Button Switch Water Drop Shape Paste Type

➤Attached leads (Length: approximately 78.7"IN )

Product name:Push button switch;Color: Black;

Voltage & Current: 9A 12V/24V/110V(Use at less than 100 watts)；

Switch head size:1.66'' X 1.1'' X 1'';Wire Length: 23.6'';

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ16mm, Switch Rating: 3A/250AC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

Heavy Duty (50 amps) push-button momentary switch that is dust and moisture resistant

12V DC, 50A, SPST (single pole, single throw)

Material: Diecast Aluminum & Plastic. Contacts are pure copper for long life . Screw terminals are brass, nickel plated

Operation : Push-On, Push again-Off, SPST switch;

Rectangular Base Measures: 17 x 14mm (0.67" x 0.56")

Operating Current: 3 (A); Rated thermal current: 6 (A); Contact resistance: 50 (Ω); Insulation resistance: 100 (MΩ)

Momentary Type: Push & Hold - ON, Release – OFF.

Mounting Hole Size: Φ16mm, Switch Rating: 2A / 36V DC / AC, Switch Combanation: 1NO.

Head Shape: High Round;Screw clamp type terminals to make fitting very easy.

Size:Waterproof Push Button Switch with Black Rubber Boot features 4 inch wire leads.Button Diameter: 12mm, Mounting Hole Diameter: 12mm

Current& voltage:3 (A）& 250 (V);Constructed with high quality copper switch contacts and is rated for up to a 10 amp usage

Material: plastic,rubber,metal;Perfect for Automotive, Motorcycle, ATV, or UTV electrical applications like lighting and accessories, most DC electrical projects

★ PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your Toyota car. Gives your vehicle upgraded with this factory look switch

★ SUPREME QUALITY - Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status

★ STURDY DURABILITY - The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.28" x 0.87". It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting

There are LASER ETCHED with 2 LEDs - upper and lower. One LED constant backlit, the other LED ON when set to ON position.Rated at 3Amp 12V, comes with connector wire kit, easy to install.

This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car or truck.

Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life (This one is Blue LED).

Push Button Switch: The ON-OFF rocker switch with SPST design (single pole single Throw) is manufactured to fit in the OEM switch blank for your cars. It come with a small pigtail that plugs into the back of the switch for better installation.

Cool LED illumination: built-in two premium LEDs Emits soft light to illuminate the patterns on the switch, easy for you to find the switch in the dark.

Wide Application: The switch is perfect for controlling Fog Lights, Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. The switch is rated for 3 amps, you would need a relay if your lights are rated higher.

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ19mm, Switch Rating: 3A/250AC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

Special attention: this is a mini push button switch with a small size and a diameter of only 12 mm.Momentary Type: Push & Hold - ON, Release – OFF.

Mounting Hole Size: Φ12mm, Switch Rating: 2A / 36V DC / AC, Switch Contacts: 1NO.

Head Shape: High Round；Push start button terminal type: Wiring terminal.

STARELO Latching Push Button Switch adopts SPST design and is made of stainless steel. The compact and high-quality products not only bring you convenience, but also guarantee the service life, which is very suitable for your car.

Product Features: The compact appearance makes more space for your car, and it is easy to install and easy to use. It is worth mentioning that this product has IP65 waterproof protection, which extends the service life to a greater extent.:

How to use: Just press it once, and your switch will be turned on. There will be no button bounce on this self-locking switch; press it again to turn off the switch.

Product name: High Domed Waterproof black stainless steel rear lights blue LED push button switch.

Product parameter: 10A 12V 24VDC, LED voltage: only 12V,Electrical life: 200 thousand times.

Product size: Hole size required: 19mm/0.74''. Plug size: 170mm x 19.6mm x 17.2mm/6.7"*0.77"*0.67"(L*W*H).

✅Operation: Push-On, Push again-Off, SPST switch, material: plastic, rubber, metal, switch is durable, waterproof, dustproof, long service life, head protection grade: IP67

✅Working current: 3A; Working voltage: 250V; Rated thermal current: 6 (A); Contact resistance: 50 (Ω); Insulation resistance: 100 (MΩ), working temperature: -40-105℃

✅Rectangular base size: 17 x 14mm (0.67" x 0.56"); Mounting hole size: 10mm (0.393"); Cord length: 12mm (4.5")

Great for electronmagnetic Starter, relay, Horn Button Switch, PC Power Switch or any circuit controls on over 500,000 cycles.

Mounting Hole Size: Φ12mm, Switch Rating: 2A/36DC, Switch Combanation: 1NO

Momentary Type: Resetable [Push & Hold ON, Release OFF]

★ <strong>PERFECT FIT</strong> ★ This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car, simple to install. Gives your vehicle an upgrade with this factory look switch.

<strong>★ HIGH QUALITY ★ </strong>Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that lights up when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/LOWER Letters. Easy for you to know the working status.

<strong>★ STURDY DURABILITY ★ </strong>The switch is made out of heavy duty ABS plastic and they come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles and ensure years of service. Safe and long lasting.

★ <strong>PERFECT FIT</strong> ★ This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car, simple to install. Gives your vehicle an upgrade with this factory look switch.

<strong>★ HIGH QUALITY ★ </strong>Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that lights up when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/LOWER Letters. Easy for you to know the working status.

<strong>★ STURDY DURABILITY ★ </strong>The switch is made out of heavy duty ABS plastic and they come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles and ensure years of service. Safe and long lasting.

Type: 22mm 7/8" Silver shell Green light Self-Locking Push Button Switch ON/OFF; Connector type: SPDT,2 position 6 pin ; Rated Voltage & Current : 10A 12-24V DC.

Material:Enclosure Stainless Steel; The base adopts flame retardant PA66; Protection level IP65 can be used in wet or dusty enviroment, With jumper terminals for easy installation and modification.

Wide application:Suitable for boats, trucks, cars, electric motorcycles, RVs, Also very suitable for DIY tasks etc.

(1) Key Switch ON/OFF Lock Electronic Turn Key Locking Power SPST Metal Keyed

Key required to turn switch on.

Hole Diameter: 1/2"