Best 90 Degree Elbow Compression Fittings in 2026

INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue; Just push to create a quick watertight union with SharkBite pushfit connectors

VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination

LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines

★WATER&FOOD USE MATERIALS: Our RO Fittings are made from safe,non-toxic materials.They are widely used for Countertop/Undersink RODI system,plumbing or drip irrigation System etc

★SIZE&TUBE COMPATIBLE WITH:1/4" Quick Connect fitting Size;Fits standard 1/4 RO Tubing used on most Water purification systems ( check your tube size carefully before order)

★EASY INSTALLATION: New generation Non-Locking Clip technology offers an easy DIY installation without tools required, Just Push in to Connect.

1/4" x 1/4" Tube push fit straight quick connect

Tube Quick Connect Push Fit Water Filters

Union Elbow Quick Connect

【Product Name】Elbow and Straight Push-in Connect Fittings

【Material】Copper and Plastic

【Size】1/4" Tube OD x 1/4" NPT Thread，Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter

Red brass pipe fitting

90 Degree street elbow

3/4-inches female pipe thread x 3/4-inches male pipe thread connection

Material: Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability

Widely Used: Widely Used In The Fuel/Air/Lquid/Oil/Gas/Vacuum Lines

Features: Good Airtightness, Pressure Resistance, Not Easy To Trip,NPT thread size does not actual diameter, it is only nominal pipe size.

Adds a 90-degree turn in your 5/8 in. supply tubing or dripline; Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system

Fits 5/8 in. tubing and dripline with outside diameter of 0.700 in.

Creates a watertight connection; has an internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting

Available in many different styles, including elbows, union, and tees

A large variety of tube diameters and pipe sizes available

Conveniently packaged in diverse piece counts to assist with both small and large projects

Brass

Compression elbow

Carded

Used as an adapter to connect tubing to faucets or as an inlet for receiving water

Works with both PEX tubing and Gray tubing

Requires no tools or additional hardware to install

90-degree elbow for connecting tubing to threaded pipe at an angle

Working Pressure: 2900psi / 20MPa;Temperature Range: -50-450℃ / -58℉ -842℉

Type 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation

👉【PREMIUM MATERIAL】: Our dot air brake fitting assortment is made of high quality CA360 brass, meets D.O.T FMVSS 571.106 and Air Brake System Requirements. With corrosion resistance, high temperature ductility and low permeability. Long service use, dot air brake fitting type: 1/8" 1/4", 3/8", 1/2", 5/8" .

👉【EASY TO INSTALL】: Our dot air line kit quicks disconnect simply push tubing in, need to use tools to fix loose parts to handle in tight places, so that use will be more firm and not easy to fall off. And pieces that contain a threaded end already have sealant pre applied to provide a secure connection.

👉【TYPICAL APPLICATION】: Air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair.

HIGH QUALIT BRASS

Size: -6 AN tube hose end to M12 x1.5 mm metric male thread fittings, 90 deg elbow

Black Anodized Finish for Durability, Long Last and Strength

Made of High Quality Lightweight 6061-T6 CNC Machined Billet Aluminum Material

72 inch length

Includes adapters to fit both 1/2-inch iron pipe and 3/8-Inch Compression female threads

Includes 1/2-inch elbow for connection to older style dishwashers

Installs in seconds without tools

302 stainless steel grab ring for tube retention

Nitrile O-ring for positive seal

【PREMIUM MATERIAL】：Our DOT air brake fittings are made of high quality CA360 brass,Meets D.O.T FMVSS 571.106 , Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting type: 1/4", 3/8", 1/2"，1/8", 5/8" .

【 AIR LINE NYLON TUBING KIT】:The air brake fittings contain 44 PCS. 12PCS DOT Union , 6PCS DOT Tee , 4PCS Bushing, 8PCS 90⁰ DOT Male Elbow Connector, 8PCS DOT Straight Male Connector , 4PCS 45⁰ DOT Male Elbow Connector , 2pcs Compression Fittings 1/4" tube x 1/4" NPT Male. Fitting types: 1/4", 3/8", 1/2",1/8",5/8". All in a durable yet lightweight plastic storage container with flip lock tabs, rust and secure.

【EASY TO INSTALL】: Our dot air fitting kit quicks disconnect simply push tubing in, need to use tools to fix loose parts to handle in tight places, so that use will be more firm and not easy to fall off.And pieces that contain a threaded end already have sealant pre applied to provide a secure connection.

Underwriter's Laboratories listed for flammable liquid; SAE J-512; ASA; reference SAE 060203 BA

Available in many different styles, including elbows, union, and tees

A large variety of tube diameters and pipe sizes available

Conveniently packaged in diverse piece counts to assist with both small and large projects

Size: Tube OD 1/4"; Ferrule Inner Dia : 1/4".

90-degree elbow for connecting tubing to threaded pipe at an angle.

Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications.

HVAC & Refrigeration tubing is measured by the outside diameter or O.D. of the pipe/tube. See description below for more details. Change your pipeline direction with our 90 Degree 99.9% Pure Copper Elbow Ideal for Potable Water, Air Conditioning, and Refrigeration Systems (both Residential and Commercial Systems

Copper to Copper Solder Piping Connection Fittings - 494 PSI Maximum Working Pressure - For Applications within a temperature range of -20° to 400°F

Lead-Free, Durable, & Low-Maintenance, Resists Corrosion & Scaling

Color: Golden; Material: Brass; Thread: G1/2 Male x M14*1.5 Male; Hole Dia: 8mmx14mm/0.31x0.55inch(ID*OD), suitable for connecting 8mm(OD) copper pipe; Total Size: 39x30x21mm/1.54x1.18x0.83inch(L*W); Packing List: 2 x Brass Pipe Tube Adapter

Advantage:The tube coupler is made of brass, it is durable and reusable.; tube fitting comes with brass connector, brass sleeve, and nuts in one set, which allows you to connect pipe easily.

Instruction:1. Insert the copper pipe with the corresponding diameter into the brass nut, and slide the brass sleeve up to the nut on its threaded side. ; 2. Put the tubing into the connector, and install and fix the pipe to the brass connector with a spanner.

Body Style: Male Elbow

【APPROVED TO USE】: Certified and listed to ASSE 1061, NSF/ANSI 61; Meet UPC, CUPC requirements. Lead Free brass are safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with brass push-to-connect fittings and ease of use reduces installation errors as they completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, they are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.

【DURABLE】: Not a cast product, more robust and durable than castings. Max. pressure 150 PSI.

【MATERIAL】 Durable solid brass construction is resistant to corrosion and long-lasting.

【EXCELLENT THREADS】: Tight threads do not slip easily, deeper and smoother threads make work easier and more efficient

For tube OD: 38mm(1.5").

Ferrule Size: 50.5mm. Fits to 1.5" ferrule tri clamp.

Elbow 90 degree clamp for connecting two pipes or tubes at an angle.