Best Hex Drill Bits in 2026

Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium

135° split point tip prevents drill from walking

Round shanks allow use with a wide variety of tool holding systems

Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)

Rigid, thick web design adds stability to bit in tough applications

Surface hardened to penetrate tough abrasive materials, Cuts through light gauge metal, high carbon steel, aluminum and alloy steel, cast iron and stainless steel

★【Premium Bright Finish 2/Pack】 multi-purpose solid carbide drill bits provide better rigidity than high speed steel bits. It is extremely heat resistant and used for high speed applications. Our tungsten carbide (WC) bits has the advantage of cutting metal either "wet" or "dry" and they provide solutions for many businesses such as aerospace drilling jobs for aircraft mechanics, precision machining, hobby supply, etc.

★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper Glass Plastics Composite Materials Cast Iron -- Our Carbide drills stay sharp many times longer than traditional steel bits making them ideal for the toughest of applications!

★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily.

[PREMIUM QUALITY] TICONN drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively

[WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic

[SIZE LIST] 30 different sizes including 1/16, 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2", one piece for each size and a adapter.

[PREMIUM QUALITY] TICONN drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively

[WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic

[SIZE LIST] 14 different sizes including 16PCS 1/16", 16PCS 5/64", 15PCS 3/32", 10PCS 7/64", 10PCS 1/8", 8PCS 9/64", 8PCS 5/32", 3PCS 11/64", 3PCS 3/16", 2PCS 13/64", 2PCS 7/32", 2PCS 1/4", 2PCS 5/16", and 2PCS 3/8"

Downcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The down-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches. Up to 2.5X longer life compared to uncoated bits.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and top, better than straight bits.

NC spotting drill

90 Degree point angle

Made of 8 percent cobalt and high speed steel

NC spotting drill

120 Degree point angle

Made of 8 percent cobalt and high speed steel

NC spotting drill

90 Degree point angle

Made of 8 percent cobalt and high speed steel

Used for workpiece circular aperture chamfering or cone hole, the edges on the surface of the chamfering processing

Suitable for using in hardness under 25 artifacts, such as aluminum, insulation board, PVC board(Not for Stainless steel)It is not suitable for materials that are too thick or too hard.

When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

NC spotting drill

120 Degree point angle

Made of 8 percent cobalt and high speed steel

NC spotting drill

120 Degree point angle

Made of 8 percent cobalt and high speed steel

5/16 in. diameter, Jobbers length

Super hard Titanium Nitride surface treatment increases drill life up to 500% over uncoated drill bits

Premium industrial grade steel Self-centering, 135 degree split point reduces "walking" at the drill point

Manufactured to NAS 907 Type C geometry aerospace specifications

Manufactured from premium high-speed steel

135 degree P3 split point is self-centering for reduced thrust and easier penetration

Size: 3/4, Material: High Speed Steel, Finish: Uncoated (Bright), Flute Length: 9, Overall Length: 12, Shank Size: 1/2, Shank Type: Round, Style: Extra Length, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand

Extra-length, for deeper holes

118-degree conventional point angles good for general drilling applications

Round shanks can be used with a variety of tool-holding systems

Combination Drill and Tap Bit: Thread Size: M8 x 1.25; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.

Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.

Set of 60 jobber length drill bits includes wire sizes #1 to #60

High-speed steel (HSS) provides hardness for wear resistance

Uncoated (bright) finish has no additional surface treatment or coating

NC spotting drill

90 Degree point angle

Made of 8 percent cobalt and high speed steel

NC spotting drill

120 Degree point angle

Made of 8 percent cobalt and high speed steel

NC spotting drill

90 Degree point angle

Made of 8 percent cobalt and high speed steel

[PREMIUM QUALITY] 99Pcs drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively

[WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic

[SIZE LIST] 14 different sizes including 16PCS 1/16", 16PCS 5/64", 15PCS 3/32", 10PCS 7/64", 10PCS 1/8", 8PCS 9/64", 8PCS 5/32", 3PCS 11/64", 3PCS 3/16", 2PCS 13/64", 2PCS 7/32", 2PCS 1/4", 2PCS 5/16", and 2PCS 3/8"

CORTOOL drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively.

135° split point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic.

14 different sizes including 16PCS 1/16", 16PCS 5/64", 15PCS 3/32", 10PCS 7/64", 10PCS 1/8", 8PCS 9/64", 8PCS 5/32", 3PCS 11/64", 3PCS 3/16", 2PCS 13/64", 2PCS 7/32", 2PCS 1/4", 2PCS 5/16", and 2PCS 3/8".

Blade diameter:6mm;shank diameter:6mm;Overall Length:50mm;90 Degree point angle,2 Flute

Material:solid tungsten steel,Long tool life.

Most suitable for copper,iron,aluminium alloys,titanium alloy,mold steels under 55HRC(HRA78).etc.

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools

Round shanks allow use with a wide variety of toolholding systems

Extra-length, for deeper holes than Jobber length

130-degree point angle, for centering and to reduce pressure on cutting edges

High-speed steel (HSS) containing cobalt is a combination of toughness and hardness, for use on drilling into hard substances

[Specifications]- Twist Drill Bits Diameter: 3mm / 0.12-inch; Drill Bit Length: 73mm / 2.87-inch; Shank Diameter: 3mm / 0.12-inch; Total Length: 120mm / 4.72-inch; 1 x Parabolic Flute Drill Bit

[Strength and Hardness]- Made of M35 HSS(High Speed Steel) cobalt steel. With high hardness and red hardness, wear-resistant, and fast drilling performance.

[Surface Treatment]- The gold oxide surface treatment increases the hardness of the drill bit, provides longer drilling life and better drilling performance, and is more durable and corrosion resistant than uncoated drill bits.

* High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications

* Can make new threads or re-thread damaged or jammed threads

* Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications

[PREMIUM QUALITY] TICONN drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively

[WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses.

[SIZE LIST] 13 different sizes including 1/16", 5/64", 3/32'', 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64'', 7/32", 15/64" and 1/4", one piece for each size

【SIZE】- Cutting Edge Diameter : 7mm / 0.28"; Shank Diameter : 7mm / 0.28"; Total Length : 350mm / 13.78"

【MATERIAL】-This twist drill bit was made by High Speed Steel and the hardness HRC is 62~63 which is harder and tougher to extreme loads,not easy to break

【ADVANTAGE】- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications