Best Ogdni Electric Guitar Bridges Bridge Parts in 2026

Nickel-plated steel vintage-style bridge assembly with six bent "Fender" stamped saddles

Assembly includes saddles, intonation screws/springs, and saddle height adjustment screws

Tremolo block will accept standard 10/32 thread tremolo arm

Fits Strat or tele Electric guitar, can be used on hardtail bridge and other bridges with 2-1/16" (52.5mm) string spacing

Material: metal alloy; String spacing: 52.5mm(2-1/16")mm

The saddles help prevent string breakage, improve tone and sustain and keep your guitar in tune

♫ Fits Strat or Tele style guitar

♫ String spacing: 52.5mm (2-1/16");Material: Zinc alloy

♫ Improving tone and sustain and keeping your guitar in tone

Genuine Fender Replacement Part

High Quality , Durable

Fits American and American Standard Series (USA) models manufactured from '86-'07. Saddles will not retrofit to a vintage-style bridge plate due to the offset intonation screw design.

Fits for Fender Stratocaster or Squier Style Electric Guitar

High gloss chrome unit with six individually adjustable nickel plated bent steel saddles.

Length 84.3mm, Width 40mm, Strings spacing and screw hole spacing from E to E 52.5mm. Block Depth 35mm. The depth of the block will fit most Stratocaster style guitars particularly thinner bodied models.

This Saddle fits for Fender Strat Tele electric guitar, in Black Finished

This guitar bridge is made of zinc alloy, string spread: approx. 53.7 MM / 2.11", Baseplate: approx. 78 * 44.5 MM / 3.07 *1.75in

Top-Loading saddle design is easy to install and easy access, adjust for intonation and height level

This is a beautiful and very well made hardware kit, including a bridge plate, a control plate, and a neck pickup, loaded in a nice box.

The bridge plate is thick metal with reliefs, has 6 roller saddles and a single coil pickup. The pickup sounds clean.

The control board has a 3-way switch, the volume and tone buttons are with pearl top.

Roller bridge tremole saddles for Fender Strat Tele Electric Guitar

Each saddle includes the screws and springs

Rollers help prevent string breakage

It compatible for Fender Strat Tele electric guitar, in Black Finishing

This guitar bridge is made of zinc alloy, String spread: approx. 53.7MM / 2.11", Baseplate: approx. 65 * 42MM / 2.55 * 1.65in

Top-Loading saddle design is easy to install and easy access, adjust for intonation and height level

Fits for Fender Stratocaster or Squier Style Electric Guitar

String spacing: 2-1/16 inch (52.5mm);Mounting Screws Space: 2-1/16 inch( 53mm）

Material: zinc alloy ; Color: Chrome

Fits Strat or Tele style guitar,used on Strat and Tele Hardtail Bridge and other bridges with 52.5mm (2-1/16")string spring.

Help prevent string breakage, improve tone and sustain and keep your guitar in tune.

String spacing: 52.5mm (2-1/16");Material: Zinc alloy.

Lot of 3 bass guitar mutes, fits 4 and 5 string Fender Squier

Each mute measures 1/2" x 1 1/4" x 4"

Made in USA

6 String Chrome Hard-tail Fixed Bridge Set with Wrench and Screws for Fender Stratocaster Strat Electric Guitar Replacement Parts (Golden)

Constructed with strong copper material with chrome finish, which ensures high glossiness and great endurance.

Suitable for electric guitars like Strat or Tele style. Great gift idea for yourself and friends to enjoy DIY fun and to play wonderful music.

Material: It is Made of high quality copper-zinc alloy, sturdy and durable, ensure a long time use.

Material: It is Made of high quality copper-zinc alloy, sturdy and durable, ensure a long time use.

Improving tone: Improving tone and sustain and keeping your guitar in tone, Replacement metal saddles for Strat tremolo or fixed bridges.

Vintage Style Brass Intonated Bridge Saddles For Vintage 3 Saddle Ashtray Type Fender Telecaster Bridges.

Each section is individually cast to be staggered, allowing for better string intonation while preserving the traditional appearance and feel.

Easy To Install Just Unscrew Your Old Saddles And Screw On These New Ones. These saddles are found on Wilkinson Telecaster Bridges

Fender Model#0036449000

Heavy duty 6 string vintage electric guitar tremolo bridge with whammy bar for ST SQ style guitar replacement, great replacement for old or broken tremolo bridge.

High gloss black unit with 6 individually adjustable, classic nickel plated steel saddles.

The base plate is made of steel, saddles and sustain block are made of diecast zinc, durable and sturdy.

A great quality hard tail chrome bridge for 6 string stratocaster or telecaster style electric guitars.

Zinc alloy material, String spread: approx. 52.5mm(2.07in), Baseplate: approx. 76 x 42mm(2.99 x 1.65in), String spacing is the standard 10.5mm(0.41in) from E-e, 5 mounting screw holes. Please be sure to verify the dimensions to confirm whether the item can fit your guitar when you order it.

Top-Loading saddle design is easy to install and easy access, features fully adjustable saddles(for intonation and height level). Upgrade your current bridge with this professional quality replacement part.

🎼 6 STRING SADDLE BRIDGE PLATE - in chrome, loaded 3pcs brass double-groove-barrel saddles and adjustable saddle height, as well as intonation screws and springs, each saddle is reversible and can be used in any position, assembled single coil alnico v bridge pups

🎼 PREWIRED SINGLE COIL ALNICO V PICKUPS - Enamel-coated magnet wire, Alnico 5 magnets, Wax-potted, Neck Pickup with chrome-plated covers,DC resistance is approx 8.1k ohms; Bridge Pickup with staggered pole pieces and copper shielding plate, DC resistance approx 9.7k ohms

🎼 PICK-UPS SELECTION SWITCH CONTROL PLATE - in chrome, 3-position pickup switch with black tip; knurled dome knobs(volume and tone), potentiometer is 250k; loaded 715p series .022uf/600v Polypropylene Film Capacitors; mounting screws pre-put on its position

PREMIUM QUALITY: The tremolo bridge saddles is made of qualified metal, sturdy and durability for long time use.

FINE WORKMANSHIP: Delicate workmanship with good texture, the guitar tremolo bridge saddles with smooth surface which is easy for you to use.

EASY TO ADJUST: The guitar tremolo bridge saddles equipped with a wrench, can adjust the height of saddle easily according to your need.

Fender Model#0032979049

Fits for Fender Stratocaster style electric guitar

Use to tension a tremolo bridge,Easy to install and convenient to use

Material: nickel plated iron; Color: Chrome

Brand new vintage style right handed ashtray bridge with 3 grooved brass saddles in a black finish for Telecaster style guitars such as Fender, Squier or other similar solid body guitars.

This bridge is of high quality and made of a nice heavy black plated steel to give you that nice vintage vibe and can be used as string through the body or for top loading style guitars, intonation and string height are individually adjustable.

Base plate dimensions 86 x 76.5 x 10mm(3.39 x 3.01 x 0.39in), String spacing 10.8mm(0.43in), Overall string spacing: 54mm(2.13in), please check with the dimensions given.

Originally released on the Hot Rod '52 Telecaster, this high power bridge fits on a vintage 4-screw mount platform with the added bonus of intonatable saddles

Plated-steel bridge (non-serialized) Bridge plate is stamped "Fender Pat. Pend. 77038"

Package includes three compensated intonatable vintage-style brass saddles, slot-head saddle height screws, Philips head intonation screws, intonations springs, and four vintage-style slot-head bridge mounting screws

Material: It is Made of copper-zinc alloy, sturdy and durable, ensure a long time use.

Upgrade Saddles: Easy to adjust and sounds great, Nice addition to your guitar. by having rollers instead of stationary surfaces, reduces stress on the strings and make the trem bar work more smoothly, and the guitar stay in tune longer.

Application: Great saddle bridge with roller, used for Squire strat and DIY guitar, compatible for most above string Telecasters

It fit for Fender Strat Tele electric guitar, in Chrome Finishing.

This guitar bridge is made of zinc alloy. Size: 70.7 x 19.8 x 9.9mm(2.78" x 0.78" x 0.39").

Top-Loading saddle design is easy to install and easy access, adjust for intonation and height level.

Mounts with the Fender 5 hole screw pattern

String righty or lefty

Increased sustain, improved tone, and fully adjustable

Brand new vintage style right handed ashtray bridge with 3 grooved brass saddles in a chrome finish for Telecaster style guitars such as Fender, Squier or other similar solid body guitars.

This bridge is of high quality and made of a nice heavy chrome plated steel to give you that nice vintage vibe and can be used as string through the body or for top loading style guitars, intonation and string height are individually adjustable. 

Base plate dimensions 86 x 76.5 x 10mm(3.39 x 3.01in x 0.39in), String spacing 10.8mm(0.43in), Overall string spacing: 54mm(2.13in), please check with the dimensions given.

Plate dimensions: 64.5mm x 51mm/2.5"x2". The screw hole center size:51mm x 38mm/2"x1.49".

Material: metal alloy; Color: Black.

Widely Used: Fits Fender Style Stratocaster/ Telecaster guitar or bass.

KAISH highest-quality titanium alloy material guitar bridge saddles; Please note only the saddles are titanium alloy, the intonation screws,springs and height adjustment screws are Stainless Steel with metric thread

Saddles Dimensions: length 20.5mm * width 10.5mm or 10.8mm or 11.3mm; Please be sure to measure the width of your bridge saddles before ordering

Improved sustain and faster attack; Keep your string spacing consistent, adjust easily, maintain the factory tone