Best Mxuteuk Industrial Switches in 2026

Feature: The waterproof toggle switch is made of metal and bakelite. The shaft and bracket are both made of Brass Material. Switch with M12X0.75 weatherproof Boot Cap Cover, can effectively protect the switch. Delicate appearance with strong Construction. Look chic and high-end on your equipment.

Function: Waterproof toggle switch with 2 pin SPST design (single pole single throw), easy to turn ON OFF. The rating is 30A 12VDC; 15A 250VAC; 20A 125VAC.

Installation: Mounting hole size is 0.48 inches (12.2MM). Each of the terminals has a machine screw for quick connections, The thickness of Terminals is 0.8mm.

Features: Waterproof 12VDC lighted rocker switch is a miniature rocker switch. Available colors of button: black/blue. "O I" marked on the button.

Materials: Round Waterproof 12V DC illuminated rocker switch is made of nylon 66 and IP65 material. The terminal is made of brass, silver plated.

Function: Waterproof 12 volt marine rocker switch has 3 pins (easy to turn ON/OFF), and SPST (single pole single throw) design with a set of jumpers. The rating is 20A 12VDC.

【COMPATIABLE】This knife-blade battery disconnect switch is suitable for TOP POST TERMINAL, battery NEGATIVE post only. Maximum Current: 750A, Rated Current: 250A. 6v 12v 24v car truck, bus, RV, Boat, trailer battery

【HIGH QUALITY & HEAVY DUTY 】This top post battery disconnect switch is made of brass material, corrosion resistance, conductive performance is good, durably made for safety use

【EASY TO INSTALL】This battery doctor knife switch for top post batteries can be adjusted into a vertical knife switch through the bottom of the screw, easy to install & simple to use. Switch the knife, then power will cut

Compatible: with a long bolt, used for side post terminal, battery side post with 3/8" hole only, recommended to mount on NEGATIVE battery post, DC 12V-24V system, 200A continuous and 600A momentary at DC 12V, on/off 2 position.

Convenience: knife blade type, easy to install & simple to use. Lift the knife, then power will cut.

Heavy Duty: solid brass made, rust and corrosion resistant, durable made for safety use.

Use to control lighting with the opening and closing of a door

TOGGLE POSITION: Normally-ON / Momentary-OFF, (SPST) circuitry turns lights on when the door opens

CSA listed

Product name: Waterproof Heavy Duty toggle switch and waterproof cap. (Axes, brackets and terminals are all made of brass), which can make your equipment more high-end and safer.

Product parameters: Mechanical life: more than 100,000 cycles. Electrical life: more than 10,000 cycles. SPST 2 pin ON/0FF; Voltaget: 20A 125VAC; 15A 250V AC, 12 volt DC 30A.

Product size: Mounting hole diameter 12MM /0.48inches; The overall size of the switch is 28.9mmx15mmx53mm/1.1inx0.59inx2.1in. The thickness of the terminal block is 0.9mm.

Feature: The Safety cover toggle switch is 2 Pin SPST(single pole single throw), designed with rocker style, easy to turn ON OFF. The switch rating is 20A 12V DC; 15A 250VAC; 20A 125VAC Heavy Duty.

Material: The safety cover toggle switch is made of Brass Actuator&threaded shaft and bakelite Housing. It's nice looking and Durable.

Red Aircraft Guard Cover prevents accidental start. The toggle switch can be activated only after you flip the switch guard cover. And the switch get OFF automaticly when you close the cover. That can effectively prevent accidental touch on the switch. Delicate appearance with strong Construction. Look chic and high-end on your equipment.

Spade-type switch

Bakelite insulators, high-conductivity brass terminals and heavy-duty contacts

Cambridge brass starter push button momentary on switch 15 amp 12 volt dc 180 watts

Cambridge premium quality push button switches are easy to install and are used by professional installers and consumers

For use in a wide variety of push button switch applications including automobiles trucks and buses; all terrain vehicles; recreational vehicles; boats; motorcycles; airplanes and helicopters; farming equipment; industrial equipment, factories; police ems and fire vehicles and apparatus

☞【What you Get】The Automotive lighting Accessory Kit contains 10 pcs LED indicator lights, 5 pcs toggle switch, 5 pcs toggle switch cover. Totally 20 pcs. One full l convenient car led accessory tool kit could save your time searching suitable tool and money purchasing extra tool!! Making your equipment looks more chic and high-end.

☞【Super Bright Indicator Lights】The kit contains 5 color of indicators, red, white, green, blue yellow. Made of high-quality Brass Alloy Shell and Electroplating Chromium, Metal Holders, 23cm Long Leads, Ultra Bright but Soft Lighting. Anti-shock,Corrosion and Vibration Resistant, Safer and Long Service Time. Work Great!!!

☞【Waterproof Toggle Switch Cover 】Made of Brass and Rubber, 12 mounting hole diameter fits toggle switch perfectly. Easy to use, Great Protector Boot for protecting the almost toggle switches from moisture, dust and dirt.Rubber Material】Made of High-quality heavy duty rubber, super Construction and Durable, Soft enough to resist pressure for your floor jack While sturdy enough to support you jack point. Perfectly suitable for 2-3 ton jack stand.

[ Waterproof Rocker Switch ] --- Rating: 20A 12V DC; Type: 2 Pins (3 Pins with LED); SPST: ON-OFF; LED Color: Blue; Switch Holder: 0.75"/19mm(Inner Diameter); 1.1"/28mm(External Diameter); Package Includes: 5 x Round Rocker Switch + 2 x Switch Holder

[ Soft Lighting ] --- The 12v rocker switch built-in LED lights emit soft light when the switch is powered on and you can recognized it easily. No longer fumble for the 12volt rocker switch but clearly see it at the dark.

[ Easy Installation ] --- The blank holder is convenient to combine the switches 12v to install to any panel. The LED illuminated is equipped with a keyhole slot to prevent unnecessary rotation, no shake, no lossen.

Push Button Switch Dimension: This pushbutton requires 12mm (1/2'') Panel Mounting Hole Size. The 1.5mm Raised Button for easy operating.

Momentary Push Button Switch rating: 3A 250VAC; 5A 12V DC, with Solder Terminals. Durable: More than 50,000 Cycles Long electrical life.

Stainless Push Button Switch Function: Push ON, Release OFF(Finger loose, OFF) Momentary Version, SPST(Single Pole Single Throw) 2 pin Normal Open.

Brand new and high-quality switch,Easy To Install & Simple To Use

Max. withstanding current: 12V 500A

Waterproof cover can better protect key hole

2.【10000 Times ON-OFF Operating Life】Made of high quality polyamide eP(Nylon PA66) , this sturdy mini boat rocker switch is born for anti-corrosion,anti-acid and high resistant with brass terminals.

2.【10000 Times ON-OFF Operating Life】Made of high quality polyamide eP(Nylon PA66) , this sturdy mini boat rocker switch is born for anti-corrosion,anti-acid and high resistant with brass terminals.

3.【Common Type】2Pcs 33B, ON-OFF PushButton Switch, 2 Pins

Single On-Off Circuit Battery Selector Switch. Switches a Single Battery to a single load group. Constructed of Non-Corrosive grade metals. Silver Plated brass stud bolts for maximum conductivity

Continuous Rating: 250 Amps, Intermittent Rating: 350 AMPs, Voltage:12-24V DC. Vapor Tight and Ignition protected. Safe for installation aboard gasoline powered boats

Two Mounting Options: Surface Mounting and Rear Panel/Flush Mounting. Base Dimension: 2 5/8 x 2 5/8 Inches (67 x 67 mm)

The briidea toggle switch is made of corrosion resistant brass switch and aluminum plate, accommodates up to 1'' thick panel, sturdy and durable

3-pin up down boat trim switch. Voltage 12V, current 15 Amp, approx. 1-3/4inch W x 2-1/2inch H

Easy to install, waterproof, low power consumption and long service life, save your time and your money

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

APIELE Brand New 22mm Momentary Push Button Switch 1 Pcs Red 1 Pcs Green

Ui: 660V; Ith: 10A ;Contact Type: SPST Red (1 1NO 1NC) Green (1 NO 1NC)

Durable And Robust:19mm Latching Push Button Switch Use Of High Quality Metal Material,Oxidation Resistant Coating Terminal Pins Of Brass. More Reliable Contact,ensuring Long-lasting Performance In Various Scenarios And Different Wiring Methods.

Mounting Hole Size:0.74".12v Switch Comes With Clear Wiring Instructions And Multiple Wiring Options, Making It Easy To Install In Cars, Ships, Trucks, And Motorcycles.

IP65 Waterproof Switch:Use Of Rubber Seals And Rubber Sleeve Inside The Buckle, Double Protection, To Achieve Waterproof Effect. Push Button Switch Provide A Stylish And Functional Lighting Solution For Vehicle Control, Airbag Control, Stereo Control, And Decorative Lighting.

Latching: Press the button--ON, Press the button again--OFF; Electrical life: 100, 000 times, Mechanical life: 500,000 cycles

Mounting Hole: 12mm(1/2"); Structure: 1NO; LED Light: 3A, 12V-24V, Halo Ring Yellow; LED life: 40,000 hours

2 wiring methods: LED light always on or illuminates when the device is working; 4 Brass terminals for connecting or soldering just as you like

NSi maintained contact and multiple Pole Toggle switch

On-Off circuit function

DPST Poles and throws

【Preferred Material】Car Push Button Switch is made of high quality materials a, which is explosion-proof and shock-proof. High precision brass silver-plating, stable electrical performance. Quality stainless steel material, waterproof and rustproof Momentary Push Button Switch.

【Safety Tool】Car Push Button Switch is built-in medical waterproof ring, IP 65 professional waterproof, safe and reliable.

【Great Applicable】8mm mini momentary push button can be used for horn, power, start switch of your vehicle.

[REPLACEMENT] Zing Ear ZE-117M Rotary Switch Replaces for Sun-light J-103A, Shine Top LS-310N Series. It Can Also Replace Zing Ear ZE-157M. Please Compare Sizing In The Schematic To Confirm Switch Will Fit Into Device.

[RATING and FUNCTION ] The Rating Is 6A 125V/3A 250V/ 6A 125VL/1A 125VT Meets The Highest Electrical Standards, And It Is An Ideal Replacement For A Variety Applications. Zing Ear ZE-117M Rotary Switch Function: OFF, L-1, L-2, L-1-2.

[HIGH QUALITY MATERIAL] 100% Brand New High Quality Switch Made of Metal Up Shell Phenolic Base Material.

Without Conduit backpate

Momentary contacts

4 amps AC/DC @ 12V

Heavy Duty 4 Pole Toggle Switch 4PST On-Off Screw Terminals - Brass and Nickel plated Multi-Pole Toggle Switches are extra durable.

Heavy Duty 4 Pole Toggle Switch 4PST On-Off Screw Terminals features include:

4PST, On-Off

Pull chain switch with off-on-on-on circuit function

SP3T poles and throws

Brass chain with cord actuator

PACKAGE INCLUDED: 10 PCS x Mini Toggle Switch(DPDT 6 Pin 3 Position ON-OFF-ON ),10PCS xM6 weatherproof Rubber Boot Cap Cover.

SILVER CONTACT BASE:Silver plated Brass terminals make the switch operate stably under 6A 250V.The Contact Base can be replaced as it is separated with the switch head.

HIGH QUALITY INSULATED AND FIRE-RETARDANT MATERIAL:The shell is made with flame-resistant material, safer than normal plastic.

Available in a variety of styles, including push-button and keyed

A large selection available to support many different amperages and applications

Durably designed for a long service life

Mating Lev-Lok Switch Wiring Module Required for Use

Heavy gauge, wraparound steel strap provides superior strength

Solid brass locking pins for strong, secure connection and optimum electrical performance

【Simple appearance】: industrial style, simple lever switch, meet the needs of personalized decoration of homes, homes, hotels, and the quality and appearance are also outstanding.

【Safe and assured】: thickened phosphor bronze parts, large-capacity U-shaped terminal, safe and firm, silver contacts, good electrical conductivity, high melting point, oxidation resistance, and abrasion resistance.

【Invisible installation】: beautiful, use screws to fix the steel frame bottom plate to the wall junction box, insert the cover and outer frame with your bare hands, open with a screwdriver, easy to replace, and easy to install.

FULL RANGE DIMMING: Full range dimmable lamp Socket for Incandescent or LED bulbs. Just simply slide the knob for full-range dimming. Adjust the lighting to meet your different needs.

COMPATIBILITY: Compatible with Dimmable LED and Incandescent medium base light Bulbs. Dimmable light sockets are available in 5 designer finishes and set screw for your convenience.

SATISFACTION GUARANTEE: You will get 100% satisfaction through our shipping, return and refund policy. We guarantee that you will be amazed by our product quality and services. You will also get Lifetime Performance Warranty, we will replace the Lamp Socket at no cost if it stops working or defective.