Best Siglent Lab Oscilloscopes in 2026

Country of origin : China

Real-time sampling rate up to 1 gsa/use

IRecord length up to 14 Mpts

Package Weight :4.0 Kg

Standard Decoder: Iic, Spi, Uart/Rs232, Can, Lin

16 Digital Channels (Mso) (Four Channel Series Only, Option)

Dual channel * 40 MHz (Sine wave) * Touch screen display

16 bit vertical resolution * Modulation / Sweep / Burst

TrueArb Technology / Easy Pulse Technology

100mhz, two-channel Digital oscilloscope for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education

Maximum real-time sample rate of 1GS/s and record length of 1Mpts (single channel)

New version of the SDS1102CML+ Includes improved higher resolution display

50mhz, two-channel Digital oscilloscope for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education^Maximum real-time sample rate of 500MS/s (1 channel) and record length of 32Kpts (1 channel) for acquiring detailed waveforms^New, higher resolution display. Advanced triggers for Isolation of specific signals^Cursors, math, built-in frequency counter, automatic measurements^Now Includes USB and LAN interfaces

200 MHz;4 channels; 1 GSa/s; 14 M memory depth; 100,000 wfm/s waveform capture rate; 7 inch display (800*480 pixels); SPO technology,1 Mpts FFT Serial bus triggering and decode (Standard), supports IIC, SPI, UART, RS232, CAN, and LIN Support MSO USB AWG Bode Plot USB WIFI

200 MHz bandwidth / 4 channels

Compatible with several options not available for the 2 channel model (SDS1202X-E) - mixed signal analysis, arbitrary waveform generator software, WiFi control, USB Isolated AWG Module

100 MHz bandwidth

Real-time sampling rate up to 1 GSa/s,Record length up to 14Mpts

Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, CAN, LIN

100 MHz; 4 channels; 2 GSa/s; 200 Mpts memory depth; 120, 000 wfm/s waveform capture rate; 10.1 inch Touch Screen (1024*600 pixels); SPO technology

100 MHz bandwidth / 4 channels

Real-time sampling rate up to 2 GSa/s

200MHz bandwidth models

1 Mpt FFT

Real-time sampling rate up to 2 GSa/s (1 GSa/s per channel, if both channels active)

NOTE: The oscilloscope will require MSO activation license software (Part number SDS1000X-E-16LA or SDS2000X-E-16LA).

Also, Four-channel SDS1000X-E scopes require firmware version 6.1.20 or greater

Model No: SLA1016

16-channel logic analyzer for 4-channel SIGLENT SDS1000X-E series scopes.

The scope requires firmware version 7.1.6.20 or greater.

Contains S.Bus controller, S.Bus cable, wiring harness and 20 digital clips.

200 MHz; 2 channels; 2 GSa/s; 28 Mpts memory depth; 400, 000 wfm/s waveform capture rate; 7 inch display (800*480 pixels); SPO technology, 1 Mpts FFT, Serial bus triggering and decode (Standard), supports IIC, SPI, UART, RS232, CAN, and LIN

2 channels / 200 MHz bandwidth

Real-time sampling rate up to 2 GSa/s

350 MHz; 2 channels; 2 GSa/s; 28 Mpts memory depth; 400, 000 wfm/s waveform capture rate; 7 inch display (800*480 pixels); SPO technology, 1 Mpts FFT, Serial bus triggering and decode (Standard), supports IIC, SPI, UART, RS232, CAN, and LIN

2 channels / 350 MHz bandwidth

Real-time sampling rate up to 2 GSa/s

200MHz; 4 channels; 2GSa/s; 200Mpts memory depth; 120,000wfm/s waveform capture rate; 10.1 inch Touch Screen (1024*600 pixels); SPO technology

200 MHz bandwidth / 4 channels

Real-time sampling rate up to 2 GSa/s

Large 7-inch TFT-LCD display with 800 * 480 resolution

200Mhz, 4 channels, 1Gsa/use, 1Mpts fft

True measurement and math can use all 14 Mpts of memory