Best Honda Lines in 2026

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control

¼ inch inside diameter (.64 CM) and ½ inch outside diameter (1.27)

Custom Extra long 6 Foot Length (1.82) can be cut to size for all your applications

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.

Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches

The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications

▶ WORRY-FREE COMBINATION ◀ The Package includes 3.28 Feet ID 1/4” inch Fuel Line; 5 x Hose Clamps. The dimensions of the two parts are compatible with each other. You can use them directly without additional purchases.

▶ Thickened Tube wall ◀ Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. The thick tube makes you feel at ease, no worries about leakage.

▶ LONG SERVICE LIFE ◀ Due to the high-quality nylon material, the average service life can reach 5 years. It is more durable than most products on the market.

The Package Includes:1×5 Feet(1.5m) 1/4" 6mm ID fuel line,6 × 2/5" ID 65 Manganese steel spring hose clamps,The dimensions of the two parts are compatible with each other,You can use them directly without additional purchases.

Wall thickness is 3mm:Contains 3 layers of material:1.The outer layer is Chloroprene rubber with good elasticity;2.The middle layer is Nylon Braided,Which increases the working pressure (300PSI / 2MPa) and the maximum burst pressure (1200psi / 8MPa);3.The inner layer is NBR,which can increase oil resistance,acid and alkali resistance,and resist various corrosive liquids.The thickened tube makes you feel at ease, No worries about leakage.

Our fuel line's main material is: NBR (copolymer of butadiene and acrylonitrile),Which makes our fuel line more resistant to high/low temperature (- 30 °C~120 °C) and aging compared with other common fuel lines,It will not crack and its performance ↑ 50%.No matter in extremely cold areas or high temperature desert, It will always accompany your vehicle to arrive the destination safely

fit 196cc 200cc 6.5 Hp Mini Bike Motorsports ATV Scooter Dirt Bike

"for Baja Motorsports Mini Bike MB165 & MB200 (Heat, Mini Baja, Warrior)/ Hensim Mini Bike MB165 & MB200 (Heat, Mini Baja, Warrior)/ Massimo MB200/ Yerf-Dog Mini Bike/ Tomberlin Firehawk/ Coleman Trail CT200U CT200U-EX BT200X/"

Size: Overall Length: 67.72" (172 cm)， Length of Black Casing: 61.02" (155 cm)， Cable Pulled Tight, Excess Cable: 7.09" (18 cm)， Cable Cylinder (Fits Into Brake Lever) Height: 10.1 mm (top to bottom)， Cable Cylinder (Fits Into Brake Lever) Diameter: 7.9 mm.

1PZ Brand Products, Quality Ensured

This valve has 2 screws that way you can open it easily for cleaning, The on and off letter are labeled on the panel so you can read easily instead of weird symbols

Three Monthes Warranty, Hassle free Return, Money Back Guarantee, We Accept All No Reason Return, No Risk, No Hassle

For gas, diesel etc. fuel lines, vapor emission lines and vacuum smog control. Please note it's a non pressure fuel line, not for engines with fuel pumps.

Strechy 2 layers compound structure, heavy duty. 10 ft in length. 1/4 in 6.4mm inner diameter and 7/16 inch outer diameter (10.4mm). The Hose Clamp is 10mm inner diameter, made of 1mm thinkness steel.

The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.

Compatible with many 50cc 70cc 80cc 79cc 90cc 97cc 110cc 125cc 150cc 159cc 196cc Mini bike, Dirt bike, Pit bike, Tao tao, Pocket Motocycle, Scooter, Moped, Quad, ATV and Go Karts

Fits in 3/16 id rubber fuel line with a 1/4 od fuel line inlet and out let. For some Honda Ryobi etc. generators.

Please note this is an inline fuel valve with one mouting hole, easy to install.

this is Red fuel hose line and Red fuel Filters,not is black.the black picture is wrong.

Package:4pcs Spring Clips and 1pcs Red fuel hose line and 2pcs fuel Filters

Fuel hose line length: 100cm

Unique Design: The inner layer of the motorcycle brake braided line is stainless steel casing to effectively avoid problems such as tubing expansion and damage.The outer layer is PVC wrapped, which has good heat insulation function.

Specification: Oil Hose Length: 900mm; Banjo Dia: 10mm; 28°Banjo Bolts.

Fitment : Our brake line is compatible with all motorcycle ATV pit dirt bike enduro motocross street bikes sport bikes kazuma sunl taotao roketa jonway scooter go kart etc.

This is Red Color!

Tube length: 100cm

Inner diameter: 5mm

For 50cc 110cc 125cc 150cc 250cc Baja 90cc BA150 Chinese ATV Four Wheeler Pit Dirt Bike

Package:1pcs Red Hose Tube Line and 1pcs Fuel Filter and 6pcs Spring Clips+1pcs Shut Off Valve Petcock

Fits most Chinese brands and some Japanese brands such as TaoTao, Roketa, Baja, SunL, BMS, SSR, KMD, NST, Buyang, Coolsports, AIM-EX, Roketa, Kazuma, Honda, Redcat, Eagle, etc.

Inner diameter: 6mm; Outer diameter: 12mm; Adapt to temperature: -30 ° C -120 ° C; Wall thickness: 3.1mm/0.12".

The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.

Easy to use and install;Good to replace it at regular intervals,extra 10 Pcs Mini Fuel Hose Clamps Adjustable with screw-tightening hose clamps for more robust applications. could save you a lot time to find proper clamp in local market.

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control

Fuel line:1/4 inch inner diameter (0.64 CM) and 1/3 inch outer diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 1/3-inches

The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications

★Gas Fuel Hose Line Length: 59''(1.5m), Outside Dia: 0.31'' (8mm), Inside Dia:0.2''(5mm).

★Gas Line Petrol Hose Tube Fuel Filters Spring Clips Clamps for This kit for 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc ATV Dirt Bike Go Kart 4 wheeler Quad Bikes Dune Buggy 4-wheel Pit Bike Trail Bike Go-Karts,such as TaoTao Buyang Coolsport Lifan Kazuma SUNL Redcat Eagle etc.

★100% durable, long-lasting line-up of fuel lines suitable for chainsaws, blowers, pressure washers, weed whackers and trimmers and many other gas engine machines oil and gas tesistant. Ideally suited for water, oxygen as well as for a variety of chemical substances.

【Kit combination】9.85-Foot 3/Meter 5/16 Inch ID Fuel Line + 2 Fuel Filters + 2 Pcs Fuel Shut-Off + 15 Pcs Clamps for use in mowers tractors snow blowers dirt bikes small engines

【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. rubber hose resistant to diesel oil, gasoline, aging, cold and low temperature

【Fuel Filter With a Magnet】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.

Package Included:2 x Gas Fuel Filter +1 x Hoses Tubing+4 x Tubing Clips

for Mini Moto Dirt Bike Honda Suzuki Yamaha ATV Moped Scooter

Fuel hose line length: 99cm-100cm

[Corrosion Resistant]-- Fluorescent yellow fuel hose for dirt bike, Oil and gas resistant, resists swelling and hardening, low temperature. Can withstand differences in weather conditions

[Smooth Lining]-- The lining is smooth, fluid resistance small, less hydraulic loss. Can resist extreme heat, abrasion and corrosion. Low-cost and flexible, easy to install

[Wide Application]-- These fuel lines can be easily cut to length and bent easily to fit onto barbed connections,Widely used in all brands' small engine fuel system repairs

Tube Length: 105cm.

Inner Diameter: 5mm.

Smooth Inner Wall, Good Flame Retardant.

Fits: GoKarts, MotorCycles, ATV's, UTV's, Dirt Bikes and More!

Package Include: 1* Gas Line

Length: Around 3 Feet (1 Meter)

Material: 1/4 Fuel line made of high-quality Rubber and nylon, preventing fuel from evaporation, making hose resistant to high pressure. Package come with 6Pcs fuel filter and 20 pcs hose clamps.

Universal Fuel Line Size: Vacuum Hose with 6.5ft long line. Inner diameter: 1/4" (6mm), outer diameter: 12/25 inch(12mm). 1/4 Inch Fuel Filters; 1/2"/ 12.5mm ID Hose Clamps.

Function: High quality fuel line keeping your engines operating at peak performance with our ASDL 1/4" fuel line assembly, ensuring your motorcycle runs smoothly.

★Gas Hose Line Fuel Filter Spring Clips for 110cc 50cc 125cc 150cc Kazuma Meerkat Redcat Falcon Taotao ATV Dirt Bike Scooter Quad Buggy Go Kart Parts, for Mini Moto Dirt Bike ATV Moped Scooter.

★100% Polyurethane durable, long-lasting line-up of fuel lines suitable for chainsaws, blowers, pressure washers, weed whackers and trimmers and many other gas engine machines oil and gas tesistant.

★Package Include: 1 X Fuel Line(1M Length) 2 X Inline Fuel Filter 4 X Spring Clips.

【1/4 ID Fuel Line】The Fuel Lines are oil resistant, hot and cold-resistant(from -22F to 338F) and ethanol tolerance. Total 9.85 feet (3m) long fuel line hose can be cut to size for all your applications.

【1/4 Fuel Line Clamp】The hose clamps size is 2/5inch ID, made of 1mm thinkness steel, suitable for 1/4" ID fuel line.

【Wide Application】Fuel lines, vapor emission lines and vacuum smog control, designed for conveying gasoline, E-85, diesel, and bio-diesel. Please note It's a low pressure fuel line, not for engines with fuel pumps.

3/16" Vacuum Hose for carburetor lawn mowers push mower dirt bikes motorcycles riding mowers go kart snowmobile generator golf cart vehicles and small engines...

3/16'' Fuel Line features: thick, durable, strong and flexible

3/16" Fuel Hose inside diameter: 4.5mm (3/16"), outer diameter: 8.5mm

Fuel line inside diameter 5.5mm

Fuel line outer diameter 10mm

Item include: 5 feet fuel line, 10 clamps

Banjo Diameter: M10

Material: Braided Stainless Steel Hose with Electroplating Banjo

Fitment: Fit Most Of Motorcycle, Dirt Pit Bikes, Enduro, Motocross, Street Bikes, Sport Bikes，Etc.

DURABLE DESIGN: High quality petrol fuel line kit,oil and gas resistant,corrosion resistant,resists swelling and hardening,low temperature.

Seven colors for your choice, Black,Red, Blue, Yellow, Green,Pink,Purple.Quality assurance, unconditional lifetime guarantee, so you can purchase now with confidence.

APPLICATION RANGE:Fit for chainsaws,blowers,pressure washers,weed whackers and trimmers and many other gas engine machines oil and gas resistant.

Banjo Diameter: M10

Material: Braided Stainless Steel Hose with Electroplating Banjo

compatible with: Fit Most Of Motorcycle, Dirt Pit Bikes, Enduro, Motocross, Street Bikes, Sport Bikes，Etc.

Banjo Diameter: M10

Material: Braided Stainless Steel Hose with Electroplating Banjo

Fitment: Fit Most Of Motorcycle, Dirt Pit Bikes, Enduro, Motocross, Street Bikes, Sport Bikes，Etc.

Wide Compatibility: Gas hose fuel line fit for 50cc 110cc 125cc 150cc 250cc Baja 90cc BA150 ATV Four Wheeler Pit Dirt Bike, fit for most Chinese brands and some Japanese brands such as TaoTao, Roketa, Baja, SunL, BMS, SSR, KMD, NST, Buyang, Coolsports, AIM-EX, Roketa, Kazuma, Honda, Redcat, Eagle, etc

Specifications: Hose tube total length: 39.37 " (99cm-100cm); Fuel tube hose outer diameter: 0.33 " (8.5mm), inner diameter: 0.17 " (4.5mm); Adjustable fuel filter clamp is 8mm inner diameter, made of 1mm thickness steel

Premium Quality: This gas hose line is a great replacement for a perfect fit and easy installation, high quality materials, meets OEM standards