Best Hp Network Transceivers in 2026

Compatible for HP J4859A/J4859C/J4859B, and Other Open Switches. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with Gigabit SFP ports.

1000Base-LX/LH SFP module: 1000Mbps data rate, Single-Mode, duplex LC connector, 1310nm wavelength, the transmission distance up to 10km, working temperature: 0℃ ~ +70℃, Tx Power(dBm): -9 ~ -3, Rx Sens.(dBm): ＜ -22.

Easy to use & Support DDM: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. DDM support: DDM allows you to monitor the critical information, to find out some potential problems.

Data Rate: 10G

Wavelength: 1310-nm; Reach: up to 10 km

Fiber Type: Dual LC single-mode fiber

Data Rate: 1.25Gb/s

Wavelength: 850-nm

Reach: up to 550 meters; Fiber Type: Dual LC OM3 multi-mode fiber

10Gb/s, 10GBase-SR SFP+ Transceiver, 850-nm, Dual LC Connectors, reach up to 300 meters transmission over OM3/OM4 multi-mode Fiber

Compatible for HP Aruba J9150A

Plug and Play, Hot Pluggable SFP+ MSA Compliant, Compliant with IEEE 802.3ae 10GBase-SR/SW

✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up to 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.

✅Wide Compatible: For HP Procurve &HP Aruba, MikroTik, Ubiquiti, Unifi, Netgear, QNAP, D-Link, Fortinet, TP-Link and Other Open Equipments with 10G SFP+ Port.

✅Hot-pluggable: PLUG and PLAY,operating temperature range: -20℃ to 70℃. Widely used in Switches, Server, Routers, NIC, Media Converter,and other fiber optic equipments.

Replacement for 1000Base-LX/LC SFP Transceiver Module HP J4859C

Mini-GBIC, Gigabit SFP, 1G SFP Transceiver, SFP LX/LH, 1000Base-LX/LH SFP, 10km

Connector Type: LC Single-mode; Supports distances up to 10 km (6.2 miles)

SFP+ 10-Gigabit Ethernet Transceiver Module.

Compatible with HP ProCurve, work with SFP+ ports of HPE devices.

10-Gigabit connectivity up to 300m on multimode fiber.

【High Performance】 Single mode duplex 10 Gigabit SFP+ transceiver, supports up to 10km fiber length connection and 0~70℃ operating temperature.

【Widely Compatible】 The SFP+ transceiver are widely compatible with Cisco products(Cisco 3000 &6000 series router are not supported) and Netgear, MikroTik, Ubiquity, DLink etc., ( Not recommended for HP, Juniper and Aruba products). The fiber module also works well with switch, router, media converter and more 10G SFP+ optic ports

【High Quality】 The shell adopts high density and heat-resistant insulation zinc alloy, high performance chipset, which makes the product more stable and efficient transmission, and low power consumption. More than 1000k+ pcs SFP are already deploy in global market

Manufacturer- HP

HP Part Number- J9150A

Product Type- Network Transceivers

Product Type :Networking Device

Package Dimensions :2.387 Cm L X5.994 Cm W X10.388 Cm H

Country Of Origin :China

Form Factor: Plug-in module

Cabling Type: 10GBase-SR

Data Transfer Rate: 10 Gbps

Reach: 550m (1,804 ft)

Fiber/Cable Type: Multi-Mode Fiber (MMF)

Wavelength: 850nm

Manufacturer Part Number: JD092B

HP Mini-GBIC Transceiver Module - 1 x 1000Base-LX

Hp Msa 2040 10gb Short Wave Iscsi Sfp+ 4-pack Transceiver - For Data Networking, Optical Network - 1 X 10gbase-sw

Product Name X120 1GB SFP RJ45 T Transceiver Product Type SFP (mini-GBIC)

Green Compliant Yes Green Compliance Certificate/Authority REACH

Product Model JD089B Application/Usage Data Networking

Interfaces/Ports Details: 1 x 10GBase-SW Network

Network Technology: 10GBase-SW

HPE Part Number- E7Y10A

Made in China

Package height :1.524 cm

Package length :5.08 cm

【Product Parameter 】1.25Gb/s up 2.5Gb/s down serial optical interface compliant to 802.3AH specifications small form factor pluggable module SFP.1490 nm DFB transmitter, 1310 nm APD photo detector BURST receiver,up to 20 km,single Power Supply 3.3V.

【Product Feature】2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers.

【Durable Metal Casing】All-metal housing for superior EMI performance Low power consumption.

100% HP COMPATIBLE: Meets MSA standards and is designed, programmed and tested to perform identically to the HP J9151E transceiver module

LIFETIME : This HP J9151E compatible SFP+ module is backed by a lifetime from StarTech

Sfp+ fiber module performance: MAX data transfer rate: 10. 00 Gaps | Wavelength: 1310nm | Type: single mode | connection Type: LC | maximum transfer distance: 10 km (6. 2 mi) | Power consumption: < 1. 3W - simple installation: This 10GBase-LR SFP+ module can be plugged directly into HP's routers or switches and is hot-swappable making upgrades and replacements seamless by minimizing network disruptions

【SFP to RJ45 】1.25G Copper SFP transceiver ( SFP port to 10/100/1000M Base-T RJ45 connection),supports up to 100m cat5e copper cable connection.

【WIDE COMPATIBILITY】The 10/100/1000Base-T Transceiver Module is widely compatible with most fiber switches, media converters, routers or other fiber optic equipments with SFP ports,such as Huawei,Cisco,Huawei,H3C,HP,ZTE,D-Link,Microtik.

【HOT PLUGGABLE】Plug in or remove your SFP module without needing to shutdown your network. Hot swap-ability ensures your network always stays up.

Application/Usage: Data Networking

Interfaces/Ports: 1 x Fiber Channel

Connectivity Media: Optical Fiber Fiber Channel

This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com

Interfaces/Ports Details: 1 x LC 1000Base-SX

Media Type Supported: Optical Fiber

1x HP 1Gbps GBIC Transceiver Module with SC Connectors

Original Manufacturer option / spare number: 234456-003

More for the money with this high quality Product

Offers premium quality at outstanding saving

Excellent product

Manufacturer Part Number: JD118B

『99% Compatible』for HP X121 1G SFP RJ45 Transceiver, especially for HPE Aruba and HPE ProCurve Networks gigabit ethernet 1000BASE-T standards, coding and writing as HP ProCurve J8177A/ J8177B/ J8177C/ Aruba J8177D J8177DCM JL747A

『1G SFP RJ45』1000BASE-T SFP Fiber Optic Transceiver Module over Cat5 Cable, 1.25Gb/s Copper SFP, 100 meters, 1.25Gbps, SFP to RJ45 connector, hot and play, auto-negotiation, MSA Compliant, IEEE STD 802.3 and 802.3ab, 0 to 70°C (23 to 158°F)

『Application』 It's able to use on all HPE ProCurve Series and HP Aruba Series 1000BASE-T 1.25Gigabit Ethernet 1G switches, Servers, Routers, NICs and other transmission equipment for Enterprise LAN Networks in data center and other cooper networking connections, and are rigorously tested to ensure reliable performance that meets or exceeds industry standards, while the information displayed may slightly vary from the original products.