Best Black Pipe Fittings in 2026

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

1/2 INCH CLOSE NIPPLE - Our 1/2" black steel pipe nipple is a short length of cast iron pipe fittings with male pipe threads at both ends for connecting pipes and fittings. You can connect this NPT (national pipe thread) 1/2" inch nipple metal piping to 1/2" inch floor flanges, 90 degree elbows, tees, couplings, caps, etc.

RAW IRON: We use 100% top-quality raw material that assures high performance of our pipe decor industrial pipe fittings. Brooklyn Pipe has a wide range of available rang of decorative DIY pipe fittings that can help you with all your projects.

NO CHINA STAMP: Our Close Pipe Nipple doesn't have the word "CHINA" stamped into the close nipple which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market.

Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Gasket and nut for air tight seal through bulkhead

✔️【 Lead Free Non-Pollution Compliant Brass 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Suitable for new or retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【Compatibility & Applications 】: Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube. COMPATIBLE with ONLY Crimp or Cinch Type rings and/or connectors. NOT Compatible with: -Expander Fitting System, Uponor/Wirsbo Expander System. This brass crimp fitting can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

Black fittings used in sanitary drain, waste, and vent (DWV), sewer and storm

Not intended for pressure use

For use where systems will not exceed 140° F

10 PCS BRASS PEX ELBOWS

10 PCS BRASS PEX TEES

10 PCS BRASS PEX COUPLINGS

Female National Pipe Taper (NPT) threads for connecting to male threaded pipes

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

1/4-Inch NPT x 1/4-Inch NPT, Coupling for connecting two pipes with the same diameter in a straight run

Union fitting for connecting and disconnecting two pipes more easily than with couplings

Socket openings on both ends for connecting two male pipes

PVC for strength and resistance to chemicals and corrosion, and an EPDM seal for resistance to oil, water, and some solvents

Half union for connecting and disconnecting two tubes more easily than with a coupling

45-degree flare head tube connection on one side and a male NPT connection on the other

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping

Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,

May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors

Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8x24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter

Material: SUS304 Stainless Steel

Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application

【Premium Quality】: High-quality brass with thickened wall, resists corrosion, rust and high temperature (32℉—200℉).

【Non-Pollution】: Lead free brass, comply with drinking water standard.

【Applications】: This brass crimp fitting can be used for PEX pipes in plumbing jobs. Great for hot or cold water distribution in your home, in warehouse or in RV.

★ Lead Free Compliant Brass.Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents.

★ 1/2" PEX Tee fitting. 1/2" PEX coupling fitting. 1/2" PEX elbow fitting.

★ Compatible:Watts;Everhot;Viega;etc. Certified for use in potable water applications.

Plumbing fittings fit Copper, Pex, CPVC Pipe and connects them in any combination. Certified by UPC / IAPMO to meet Lead-Free ANSI/NSF-14/G Compliant.

AWWA C800 Compliant. Manufactured in an accredited facility, meeting ASME B1.20.1 ASSE 1112

Use in potable water and hydronic heating applications

【APPROVED TO USE】: SUNGATOR push pex fittings are Certified and listed to ASSE 1061, NSF/ANSI 61; SUNGATOR plumbing fittings meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with SUNGATOR pushfit couplings and ease of use reduces installation errors as pushfit plumbing fittings completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, SUNGATOR push pex plumbing fittings are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.

COUPLING AND CLIP COMBO KIT: 1/2" x 1/2" Couplings (10 pcs) AND 1/2" Disconnect Clip Tool (1 pc)

LIFETIME WARRANTY: The "Gold Standard" of Push-Fit fittings- Designed and manufactured by the plumbing experts.

PUSH-TO-CONNECT PIPE: Easiest and fastest way to join copper, CPVC, or PEX pipe. No need for installation tools, glue, or soldering! Simply push to connect pipe.

[Material]: Heavy-duty brass,strong and durable,with corrosion resistance,high temperature ductility and low permeability

[Features]: Both ends of this joint have 45-degree flare connection,which has multiple functions and is convenient for installation and disassembly.It is easier to connect and disconnect the two pipes than a coupling

[Package includes]: 2 PCS 3/8" Male Flare x 3/8" Male Flare + 1 PC Teflon Tape

The product is manufactured in china

The product is highly durable and easy to use

Easy installation and easy handling

1/4"x1/4" Brass Pipe Hose Fitting with NPT Female Thread Straight Hex Nipple Fast Coupler

Good raw material brass, high corrosion resistance, low magnetic characteristics and high temperature ductility

Made with precision process, no leaking and durable, easy to connect and disconnect

Material:High quality CA360 brass.

Dimension:Inner diameter1/4" female NPT thread to 1/4" female NPT thread.Outer Diameter:19mm / 3/4-16 inch.Fit min 0.75" diameter hole.

APPlication:Female coupler for connecting NPT fittings through a bulkhead.

【APPROVED TO USE】: SUNGATOR push pex fittings are Certified and listed to ASSE 1061, NSF/ANSI 61; SUNGATOR plumbing fittings meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with SUNGATOR push fittings and ease of use reduces installation errors as pushfit plumbing fittings completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, SUNGATOR push pex plumbing fittings are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.

Connects pipe in a straight run

Fitting connects to schedule 40 PE pipe on both ends

PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons

✅ SPECIFICATION - Standard brass pipe fitting 3/8" NPT female to 3/8" NPT female coupling adapter for connecting two male threaded pipes with the same diameter in a straight run.

✅ MATERIAL - This pipe coupler is made of high quality durable brass for corrosion resistance, high temperature ductility and low magnetic permeability. Can be used in wet environments; it can also be used with grease, fuels and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections.

✅ EASY INSTALLATION - The deep threads design makes fittings bite better, engaged with the object to enhance fixation, no leaking, not easy to slip. Easier and faster installation.

✔️【 Lead Free Non-Pollution PPSU polyphenylsulfone Material 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Poly Alloy pex Fittings are suitable for domestic water or radiant heating system, also used retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【 Applications 】: This Poly PEX A expansion fittings can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

STRAIGHT EXTENSION COUPLING TRAP ADAPTER: Upgrade your home's plumbing with a heavy duty trap adapter

DURABLE POLYPROPYLENE: Durable extension coupling is made from polypropylene for long-lasting use

INCLUDES REDUCING WASHERS: Comes with reducing washers to ensure a perfect fit

GALVANIZED STEEL COMPRESSION TUBING: This long pattern compression coupling provides a safe way to connect pipe without the use of heat, and is an excellent accessory for making repairs to existing pipe systems, as well as in new construction; the working pressure of the pipe coupler is 125 PSI, with a maximum of 300 PSI

DURABLE: Compression fitting is constructed with heavy duty galvanized steel for long-lasting reliability, and helps to protect against corrosion; equipped with a rubber gasket and washer to prevent leaks

SPECS: Pipe fittings measure 3-7/8 inches in length, and feature a 1/2 inch Iron Pipe Size (IPS) connection

Reducing Coupling for connecting two different size male threaded pipes

1/4" Female National Pipe Taper (NPT) threads on one end and 1/8" on another end.

Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.

SPICAL FEATURE: Brass Pipe Fittings Kit to meet your daily needs, with multiple types for random use

FUNCTION: Female and male National Pipe Taper (NPT) threads for connecting to female and male threaded pipes,NPT thread size does not actual diameter, it is only nominal pipe size.

METAL: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Package Include: 5pcs

Net Weight: 21g/pc

Materies: lead free brass C69300(Import from Japan)

WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection; Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment

HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used; Takes all of the work out of disconnecting and moving or switching from machine to machine; Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability; No special adapters for each tool required

EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp; not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock)