Best Sliding Power Saws in 2026

Use either the 1-1/2-inch dust port or the front-mounted dust blower to clear sawdust from your line of cut

Includes a lock-on trigger switch, a beveling footplate, a non-marring shoe, a wood blade, a metal blade, a parallel fence bracket, and a two-year warranty

Operates at two speeds of either 1520 or 2620 FPM

Includes a 2-year warranty, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)

Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position

Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

Included 40-Volt 4Ah fade-free lithium-ion battery and charger compatible with the entire WEN 40V Max Series

Backed by a two-year warranty

Design allows for tool-free chain adjustments and emission-free operation

Includes an 8-inch saw chain, a blade cover, a shoulder strap, and a two-year warranty

Tool-free chain changes make for easy and fast chain replacement

Requires no gasoline for emission-free operation

Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees

Lightweight portable design weighs in at a mere 14.5 pounds

Features a 10/14 TPI metal-cutting blade, an adjustable front handle, ball-bearing blade guides, an external blade tensioning lever, and a two-year warranty

NOTE: battery and charger sold separately; compatible with the entire WEN 20V Max Lithium-Ion Cordless Power Tool series. Requires two WEN 20V Max batteries for operation; a minimum of two 4Ah batteries is recommended.

Includes a 6.5-inch 48-tooth carbide-tipped blade (165 mm) with a 20 mm arbor, track-alignment cams, a dust port adapter, and a two-year warranty

Onboard LED cutline guide illuminates your line of cut for maximum accuracy

Includes an 80-tooth carbide-tipped blade with a 1-inch arbor (model BL1280), two quick-lock table extension support arms, two adjustable support fences, one quick-clamp assembly, a dust port, a dust bag, a carrying handle, and a two-year warranty

Features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity

Includes a 10-inch 40-tooth carbide-tipped blade, two table extensions, one clamp assembly, a dust bag, a dust port adapter, and a two-year warranty

5A motor rotates the 4-1/2-inch blade 3500 times per minute for cuts up to 1-11/16 inches deep

Includes a 24-tooth carbide-tipped wood cutting blade, a carrying case, a dust extraction tube, and a two-year warranty

Product 1: Onboard LED cutline guide illuminates your line of cut for maximum accuracy

Product 2: Universal design fits nearly every miter saw on the market, including all WEN miter saws

Product 2: Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground

Product 2: Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long

Adjustable depth stop prevents the saw from cutting deeper than intended

Includes an easy-to-change 24-tooth carbide-tipped blade, a reliable rip-cutting guide, a dust port adapter, and a two-year warranty

Brushless emission-free motor means less maintenance and a longer lifespan in comparison to other pole Saws

Includes a 10-inch guide Bar, a 10-inch chain, a scabbard, a shoulder strap, a 2Ah Battery and a charger

Twist-lock quick-release blade holder allows for simple tool-free blade changes

Includes one metal blade, one wood blade, a soft rubber-grip front handle, and a two-year warranty

Spacious 12-1/4 x 11-7/8-inch work table bevels up to 45 degrees

Includes a 1/4-inch-wide blade, a 2-1/2-inch dust port, a rip fence, a miter gauge, an adjustable blade guard with ball-bearing supports, and a 2-year warranty

Features a 7-1/2 in. crown molding nested capacity and a 6-3/4 in. base board vertical capacity

Includes a 12 in. 60-tooth carbide-tipped blade, 2 retractable table extensions with work stops, 1 clamp assembly, and a dust bag

Adjust the depth stop to create cuts in boards up to one inch in thickness

Includes an HSS metal-cutting blade, a diamond-coated tile-cutting blade, a carbide-tipped wood cutting blade, a carrying case, an 80-inch dust extraction tube, a rip-guide fence, and a two-year warranty

5A motor rotates the 3-1/2-inch blade to 4500 times per minute

Includes an HSS metal-cutting blade, a diamond-coated tile-cutting blade, a carbide-tipped wood cutting blade, a carrying case, a dust extraction tube, a rip-guide fence, and a two-year warranty

Upper arm locks in raised position to allow for easy interior cuts and workpiece adjustments

Features a variable speed 1.6-amp motor, a flexible air pump, two 5-inch pinless blades, a tension release lever, a 1-1/2-inch dust port, an adjustable material hold-down clamp, a 3/4-inch stroke, and a two-year warranty

Product 1: 2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees

Product 2: Universal design fits nearly every miter saw on the market, including all WEN miter saws

Product 2: Collapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage

Product 2: Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground

Product 2: Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long

Quick release vise clamp allows for maximum efficiency and productivity

Top-of-the-line chop saw includes a low-vibration precision-machined cast aluminum base, a 45-degree adjustable fence, a round work piece holder, a 1.5-inch dust port, a removable dust bin, a plunge lock, and a two-year warranty

Onboard LED cutline guide illuminates your line of cut for maximum accuracy

Includes 7.25-inch 40-tooth carbide-tipped blade (w/ 5/8-inch arbor), two table extensions, one clamp assembly, a dust port, an onboard carrying handle, a dust bag, and a two-year warranty

Product 1: Simple Operation: 45°-90° Cutting with Removable Alloy Steel Base, The base can also be Swiveled angle from 0° - 45°. It is easy to disassemble. With this workbench base, you can keep the cutting material stable and secure.

Product 2: Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel

Product 2: Includes a 1/2-inch keyed chuck and onboard key storage

Product 2: Operates at 5 different speeds: 740, 1100, 1530, 2100, or 3140 RPM

Product 2: 6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each direction

Product 1: Powder-coated steel design collapses for easy transportation and storage

Product 2: Fits Most 7-1/4, 8, 8-1/4, 10, And 12-Inch Miter, Sliding Compound Miter, Chop, And Portable Saws

Product 2: New Recessed Laser Design To Protect The Laser From Hitting The Material On Deep Cuts

Product 2: New Thinner Design To Fit More Saws

Product 2: New Brighter And More Accurate Laser Line

Product 1: Spacious 12-1/4 x 11-7/8-inch work table bevels up to 45 degrees

Product 2: Provides hands-free operation to any woodworking tool

Product 2: Press down on the foot pedal to start your machine and release to stop

Product 2: Installs easily with textured surface to prevent slipping during operation

Product 2: Handles 120 volt machines up to 15 amps in size

Product 1: Operates at two speeds of either 1520 or 2620 FPM

Product 2: Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc

Product 2: Belt tilts anywhere from 0 to 90 degrees

Product 2: Sturdy cast iron base prevents any heavy vibrations

Product 2: 4.3 Amp motor provides up to 3600 RPM

Product 1: Compact design combined with onboard carrying handle make for easy storage and transportation

Product 2: Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish

Product 2: Features a spacious 30-by-6-inch table

Product 2: Remove 0 to 1/8 of an inch of material with each pass

Product 2: Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees

Product 1: 8- 1/4in x 2- 1/2in max cross cut capacity with a 0° - 45° bevel tilt and a 50˚ - 50˚ miter that covers all common cutting angles accurately

Product 2: Universal design fits nearly every miter saw on the market, including all WEN miter saws

Product 2: Collapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage

Product 2: Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground

Product 2: Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long