Best 5 Square Nose End Mills in 2026

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length

SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet

PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity

Diameter: 5/8", Shank Diameter: 5/8", Flute length: 1-5/8", Overall Length: 3-1/4"

4 Flute, Standard Tooth

M42-8% Premium cobalt, TiAlN Coated

Product Name : End Mill;Material : HSS

Color : Gray;Cutting Diameter : 12.7mm/1/2"

Cutting Depth : 35mm/1.4";Shank Diameter : 12.7mm/1/2"

Package Included: 5pcs 1/2" carbide square end Mill

Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.

Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.

4 Flute,Cutting diameter=5/16'',Shank diameter=5/16'',Flutes length=1-5/8'',Overall Length=3-1/2''.

Material:M2AI,High Speed Steel,long tool life.Extra long blade for deep cavity machining.

Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc(under HRC32(HRA66)).

Contains 7Pcs square endmills:1/8''+5/32''+3/16''+1/4''+5/16''+3/8''+1/2'' Blade Diameter

Material:M2AI,High Speed Steel,long tool life.

Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc

1.Four flutes produce a better finish than fewer flutes.

2.Material: HSS ; Imperial Units, not Metric .

3.One Set of end mill bits Including: 6 Different kinds of Inch Size:1/8",1/4",3/16",5/16",3/8",1/2" end mills to meet your need,

【HEAVY DUTY & SOLID CONSTRUCTION】Made of ultra-fine grain carbide, ensuring high work efficiency with good milling, cutting performance.

【HIGH EFFICIENCY】These Engraving bits have sufficient flexural strength and high abrasion resistance, obtain accuracy and fine finish With sharp edge, which is able for fast engraving that makes high efficiency.

【SIZE】Cutting Diameter:1/8''; Cutting Depth:12mm/4.72in; Shank Diameter:1/4''.

HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency.

APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.

CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.

⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability.

⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters.

⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.

PROUDLY MADE IN THE USA - Precision CNC ground in the heartland of America

APPLICATION - Perfect for all milling applications on aluminum and other non-ferrous materials

SPECIFICATIONS - 5/8" Diameter x 3 Flutes x 4" OAL x 1-5/8" LOC x Square Corner

Product Name : End Mill

Cutting Diameter : 2.5mm / 0.1"; Cutting Depth : 8mm / 0.3"

Shank Diameter : 6 mm / 0.24"; Total Length : 52mm / 2"

1.Material: High carbon steel

2.Color: Silver

3.Dia. : 6mm (1/4")

【Material】: Cnc 4 Flute Solid Carbide Spiral Router Bit excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron,etc.Strictly for steel use, if milling aluminium, our 3 flute end mill is recommended.

【AlTiN Coating】: Titanium aluminum nitride (AlTiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

【High Performance】: carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.

General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.

Solide Carbide: The material is European origin ultra fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.

AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.

1.Contains 4pcs Square endmills:1pc×1mmDIA,1pc×1.5mmDIA,1pc×2mmDIA and 1pc×3mmDIA.

2.Material:Tungsten carbide,High quality TiAlN coating,getting long tool life.

3.Suitable for process Alloy,Iron and Steel under HRC55.High Performance.

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic

Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills

Four flutes produce a better finish than fewer flutes

DLC coating (diamond-like coating)-The tool surface hardness(HV7000) Low coefficient of friction(μ=0.08-0.15)，Strong adhesion resistance

Use ultrafine grain tungsten-carbide steel matrix，Perfect combination of toughness and hardness，Improve wear resistance while avoiding breakage and fracture

Manufactured with five-axis precision grinding machine, Each milling bit is tested by tool testing instruments，Good stability of dimensional accuracy

1.End Mill Set Package：1/2", 3/8", 5/16", 1/4", 3/16", 1/8".

2.Material: alloy steel, carbon steel, cast iron, Quenched and tempered steel, heat treated steel, etc. carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.

3.Coating: AlTiN. high aluminum content provides excellent hot hardness and oxidation resistance. it can maintain hardness even at high temperature. 

Size：d5x13Cx6Dx50L-3F.Annotation: d=Flutes diam, D=Shank diam, C=Flutes length, L=Full length.

【1】Brand: XJL 【2】Name:DLC Coated milling cutter 【3】Material:solid carbide end mills,tungsten steel bar

【4】Number Of Flutes：3F,Spiral Angle + Big core diameter 【5】Applicable cutting materials: aluminum, copper, aluminum alloy, magnesium alloy and zinc alloy.which can directly cut aluminum 6061 quickly.

1-1/8 Length of Cut

3 Overall Length

Made In the USA

Product Name : End Mill

Cutting Diameter : 7mm / 2/7";Cutting Depth : 25mm / 1"

Shank Diameter : 8mm / 1/3"

2pcs/package

Brand name:JERRAY

Over all length 2"

Product Name : End Mill;Design : 4 Flute

Cutting Diameter : 5.5mm / 0.2"; Cutting Depth : 20mm / 0.7"

Shank Diameter : 6mm / 0.24";Total Length : 60mm / 2.4"

Package Included: 1pc 1/4 " carbide square end Mill.

Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.

Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.

Diameters - Contains 1 each R8 holders: 1/4, 3/8, 1/2, 5/8, & 3/4.

Well-made Processing - The surface of the face mill cutter arbor is quite smooth, which offers a comfortable feeling and nice appearance.

Premium Quality Material - This end mill holder is made of alloy forged tool steel, rugged and durable, which is enough to ensure a long time use.

Material:Tungsten carbide

Brand name:JERRAY

Over all length 3"

Package Included: 5pcs 1/8 " carbide square end Mill.

Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.

Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.

Package Included: 5pcs 1/2 " carbide square end Mill.

Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.

Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.