Best Karparts360 Tail Light Assemblies in 2026

This listing is for 10 Pieces smoked 3/4 led marker lights(5 Pieces 3/4 amber led marker lights and 5 Pieces 3/4 red led marker lights). 60 lumen each marker light with single High Quality SMD LED Inside of the marker Lamp, offer you bright light with 50,000 hrs Life Time;

These 3/4 led lights are hardwired with 2 wires pigtails including lead and ground wires ensures for mounting to almost all surfaces: Black wire is ground and White positive; This 3/4" round Smoke Black lens LED lamp for use as a combination clearance light and a side marker light when properly mounted, for use with truck fenders or anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel;

Function: led clearance lights, led marker lights, led side marker lights, led side fender lights, led front grill lights, identification lights, Trailer Lights, air dam lights, boat courtesy lights, auxiliary turn signal lights, auxiliary tail lights etc. NOTE: this smoked marker lights is sonically sealed for ip65 waterproof, please do not use it under water, thanks;

Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light;

These Triple Vertical Taillights include 3 red lenses: 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White Leds(Built-in reflex reflector removes the need for a separate reflector); This Led triple tail light assemblies can be mounted oriented horizontally, vertically, surface/flat mount, whatever suits your application;

This LED Triple Tail Light is hardwired with 8 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights; NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal;

Partsam ( 2 x White ) 4" Round Led Truck Trailer Lamp--reverse backup running Light, with 24pcs high power LED inside.

Application: Trucks,trailers (Boat, Box, Camper, Transport), 4WD, Caravans, Motor Homes, Boats / Marine, Earthmoving & Mining Equipment, Forklifts, Buses and Coaches, Camping, Fishing.

Dimensions: outer diameter 5.5inch, inner diameter 4" (check the picture 5), dill a hole about 3.85" to install it; Function as back up light, reverse light and running light.

This listing features for 1 set Smoked LED Tail Lights Assembly Kit, which includes 2 pieces Square 12V Combination 39 LED Signal Tail Lights(both Driver Side and Passenger Side are included. Replace your dim factory tail lights with these brilliant LED tail lights assemblies, it will keep you safe when driving on road. Screws, bolts and nuts are included for complete installation;

This smoked rear flatbed tail lights is universal fit for 12V dc vehicles including trucks,trailers, RVs, boats, vans, buses, pickups and more; Also we get feedbacks form customers that it is ideally compatible with 1976-1983 CJ5 tail lights, 1976-1986 CJ7 tail lights, 1981-1985 CJ8 tail lights, 1987-1995 Wrangler YJ tail lights and 1997-2006 Wrangler TJ tail lights.Note: Side Indicators not included;

These rear tail lights features 39 Super bright LED's: (12) Red for stop turn tail functions, (21) white LED's for backup lights and (6) white LED's for license illuminator. These square tail lights hardwired with 4 Wire pigtails: White wire is ground, Black wire for tail,parking,directional,license plate light, Red wire for stop turn brake lights and Blue wire for backup or reverse lights;

Compatible with Jeep 2011-2021 Grand Cherokee WK2, 2011-2016 Compass; Compatible with Dodge 2011-2017 Journey

Rear fog lamp kit increases rear visibility in all weather conditions (function for taillight and brake light features)

Directly replace off the original rear bumper reflectors (57010720AB & 57010721AB)

This listing features for 6 Pieces 5x3 led tail lights(4 Pieces 5x3" Red Rectangle 12 LED Stop/Turn/Tail Truck Lights and 2 Pieces 5x3" White Rectangle 12 LED Reverse Backup truck tail Lights). Black Rubber Grommet and 3 Prong Wire Pigtails are Included for complete installation (not directly hardwired);

Each 3x5 tail lights has 12 leds and provide you better visability when driving on road. Functions of 5x3 Rectangle led trailer tail lights: stop/turn signal/brake/tail lights (Red) and back-up/reverse lights(White). NOTE: People call it 3x5 led tail lights on Market, but the actual sizes are as following: 5.14" x 3.27" x 1.00" (light only), 6.25" x 4.26" x 1" (overall size) and you may need to drill a hole about 5-5/8" to install;

Wiring of these 3x5 flatbed tail lights: White wire is the Ground, red wire is high mode and 3x5 red tail lights function as stop/brake/turn signal lights and 3x5 white lights function as backup/reverse lights, black wire is low mode and function as tail/running lights; Note: These 5x3 rectangle led tail lights is IP65 Waterproof, please do not use it in heavy rain or put it under water, thanks;

SUPER BRIGHT: 2Pcs 6.3" oval truck trailer led tail lights can be used as stop light, tail light, running light, and reversing light.Internal Miro Flex multi-surface reflector design provides higher light output and modern appearance.

DIMENSIONS:Drill hole: 6.5", Outer Diameter: 7.4", Inner Diameter: 6.3".LED Quantity: 23 LED(White 7 LEDs + Red 16 LEDs)

DURABLE: these oval truck trailer led tail lights are impact resistant and not easily damaged by impact. Each LED tail light is waterproof and sealed, which can effectively resist the invasion and corrosion of sand, dust, dust, rain, snow, etc.

Value Package: you will receive 8 pieces of 6 inch stop turn tail brake lights, each one includes the rubber flush grommet and 3-prong wire pigtail and plug; The light has 24 pcs LED, bright enough to improve the visibility and ensure safer driving; Our oval trailer lights can meet requirements for brake lights, taillights and turn signals

Brighter Lights for Safer Driving: these flush mount LED tail lights are equipped with 24 high-intensity red color LEDs and light-diffusing lenses, brighter than traditional clearance lights, can provide good performance; You can share with your neighbors, lovers, families and friends to enhance their safety on the road

Easy to Install: unlike traditional bezel-mounted brake lights, our LED tail lights don't need a large mounting hole, it has notches inside of grommet, designed for easy and quick installation; It also has a strong attaching ability between 3-prong plug, will help the light fit firmly on the grommet, no easy to shake, there will be no worries of loosing light or wires

2 LIGHTING PATTERNS - White light work as a reverse light, backup light; red light work as 3rd brake light, taillight, provides notice to drivers behind you when you are braking, enhanced safety & visibility at night.

HIGH QUALITY LED CHIPS - LED reverse light equipped with 4 pieces 4W high intensity led chips, which is low consumption but high brightness.

DURABLE CONSTRUCTION - LED 3RD brake lights are made of high quality aluminum housing, PC lens and 304 stainless steel mounting bracket, with black powder coated finish for rust and corrosion resistance.