Best Karparts360 Tail Light Assemblies in 2026

BRAKE, TURN & PARK FUNCTIONALITY- DOT compliant to be used as rear reflector, parking light, brake light & turn signal.

REFLECTIVE LENS DESIGN- Unlike cheaper ID bars, ours features a reflective lens design fulfilling the requirement for trailers having rear reflectors.

SIMPLE TO INSTALL- A wiring legend is printed on the back of the unit for easy installation; GND, TAIL, and STOP are clearly marked on the back.

This listing is for 10 Pieces smoked 3/4 led marker lights(5 Pieces 3/4 amber led marker lights and 5 Pieces 3/4 red led marker lights). 60 lumen each marker light with single High Quality SMD LED Inside of the marker Lamp, offer you bright light with 50,000 hrs Life Time;

These 3/4 led lights are hardwired with 2 wires pigtails including lead and ground wires ensures for mounting to almost all surfaces: Black wire is ground and White positive; This 3/4" round Smoke Black lens LED lamp for use as a combination clearance light and a side marker light when properly mounted, for use with truck fenders or anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel;

Function: led clearance lights, led marker lights, led side marker lights, led side fender lights, led front grill lights, identification lights, Trailer Lights, air dam lights, boat courtesy lights, auxiliary turn signal lights, auxiliary tail lights etc. NOTE: this smoked marker lights is sonically sealed for ip65 waterproof, please do not use it under water, thanks;

Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light;

These Triple Vertical Taillights include 3 red lenses: 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White Leds(Built-in reflex reflector removes the need for a separate reflector); This Led triple tail light assemblies can be mounted oriented horizontally, vertically, surface/flat mount, whatever suits your application;

This LED Triple Tail Light is hardwired with 8 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights; NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal;

Each with 38 Super bright LEDs:16 Red LEDs for stop/turn/tail functions. 18 White LEDs for backup function. 4 White LEDs for license illuminator.

Universal for 12V vehicles like Truck, Trailer, Boat, bus, Lorry, Van, caravan, etc

D OT Compliant for street legal lighting. 12 volts; Low ampere draw.

BRIGHT LIGHTING: Equipped with 24 pieces of LED diodes with better heat distribution, no glare, brighter and more energy-efficient than halogen bulbs, guarantee maximum visibility and safety even in harsh weather.

SEALED & WATERPROOF: Exquisite appearance with sealed design and waterproof feature, the LED tail lights are capable to prevent any invasion and corrosion from sand, dust, dirt, water, snow and other impact of inclement weather, provides long-term durability for your vehicles.

PRACTICAL FUNCTIONS: Work as stopping light, turn signal light, tail light, brake light and auto marker lights. Come with chrome bezels, PC lens and grommet housing welded together to ensure a permanent and durable use.

Partsam ( 2 x White ) 4" Round Led Truck Trailer Lamp--reverse backup running Light, with 24pcs high power LED inside.

Application: Trucks,trailers (Boat, Box, Camper, Transport), 4WD, Caravans, Motor Homes, Boats / Marine, Earthmoving & Mining Equipment, Forklifts, Buses and Coaches, Camping, Fishing.

Dimensions: outer diameter 5.5inch, inner diameter 4" (check the picture 5), dill a hole about 3.85" to install it; Function as back up light, reverse light and running light.

This listing features for 1 set Smoked LED Tail Lights Assembly Kit, which includes 2 pieces Square 12V Combination 39 LED Signal Tail Lights(both Driver Side and Passenger Side are included. Replace your dim factory tail lights with these brilliant LED tail lights assemblies, it will keep you safe when driving on road. Screws, bolts and nuts are included for complete installation;

This smoked rear flatbed tail lights is universal fit for 12V dc vehicles including trucks,trailers, RVs, boats, vans, buses, pickups and more; Also we get feedbacks form customers that it is ideally compatible with 1976-1983 CJ5 tail lights, 1976-1986 CJ7 tail lights, 1981-1985 CJ8 tail lights, 1987-1995 Wrangler YJ tail lights and 1997-2006 Wrangler TJ tail lights.Note: Side Indicators not included;

These rear tail lights features 39 Super bright LED's: (12) Red for stop turn tail functions, (21) white LED's for backup lights and (6) white LED's for license illuminator. These square tail lights hardwired with 4 Wire pigtails: White wire is ground, Black wire for tail,parking,directional,license plate light, Red wire for stop turn brake lights and Blue wire for backup or reverse lights;

【Multi-functions】Each light has 11 high quality LED diodes, providing maximum visibility. Functions as marker, side marker, parking light, stop light, turn signal light, tail light and brake light, meet ALL your need.

【Highly Sealed & durable】 LED Light Bar the front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed. IP67 Waterproof , no worry about water entering in. Waterproof enough to withstand all weather abuse.

【Simple Wire Connection】 White wire for ground, black wire for low brightness tail light, and red wire for high brightness brake light.

Compatible with Jeep 2011-2021 Grand Cherokee WK2, 2011-2016 Compass; Compatible with Dodge 2011-2017 Journey

Rear fog lamp kit increases rear visibility in all weather conditions (function for taillight and brake light features)

Directly replace off the original rear bumper reflectors (57010720AB & 57010721AB)

This listing features for 6 Pieces 5x3 led tail lights(4 Pieces 5x3" Red Rectangle 12 LED Stop/Turn/Tail Truck Lights and 2 Pieces 5x3" White Rectangle 12 LED Reverse Backup truck tail Lights). Black Rubber Grommet and 3 Prong Wire Pigtails are Included for complete installation (not directly hardwired);

Each 3x5 tail lights has 12 leds and provide you better visability when driving on road. Functions of 5x3 Rectangle led trailer tail lights: stop/turn signal/brake/tail lights (Red) and back-up/reverse lights(White). NOTE: People call it 3x5 led tail lights on Market, but the actual sizes are as following: 5.14" x 3.27" x 1.00" (light only), 6.25" x 4.26" x 1" (overall size) and you may need to drill a hole about 5-5/8" to install;

Wiring of these 3x5 flatbed tail lights: White wire is the Ground, red wire is high mode and 3x5 red tail lights function as stop/brake/turn signal lights and 3x5 white lights function as backup/reverse lights, black wire is low mode and function as tail/running lights; Note: These 5x3 rectangle led tail lights is IP65 Waterproof, please do not use it in heavy rain or put it under water, thanks;

(Set of 2 bulbs) Socket Type: H8,H9,H11,H16(Japan) base, Color: 6000K Xenon White, Power: 8W per bulb. These bulbs are not headlight bulbs, no high/low beam function. Please make sure the correct model before purchase

360° Illumination: 87 pcs of high quality SMD 3030 chipsets to offer ultra brightness for your vehicle, More than 300% brighter than original halogen bulb, full Aluminum Housing for Maximum Light output and better heat distribution

Stable Performance: Low Power Consumption, energy-saving, durable and high temperature resistance. IP65 waterproof makes it can work in any bad weather conditions

2 Year Warranty : our product MADCATZ comes with a 2 years warranty , if the customer received defective light or the light not working under warranty, please kindly contact us. We like to help you fix this issue.

Pack of 2: The package sold as 2 pcs round clear lens red trailer tail light kit included screws set mounting. It comes with good design materials, ABS PC lens and chrome housing, which has no shade color.

High Output: It comes with 12 LED super flux F3 Piranha provide an ultra brightness to make your night safety, the light can stand by with 50,000 hrs lifespan but power saving, low temperature and low power consumption.

Universal Fit Any Vehicles With DC 12V, such as Truck, Trailer, UTV, ATV

Package Contains: 2X 12-LED Round Tail Light With Wiring Plug

Made of High Quality ABS Housing PC Lens and Rubber Cover

2 Year Warranty : our product MADCATZ comes with a 2 years warranty , if the customer received defective light or the light not working under warranty, please kindly contact us. We like to help you fix this issue.

Pack of 2: The package sold as 2 pcs round smoked lens amber trailer tail light included screws set mounting. It comes with good design materials, PC lens and chrome housing, which has no shade color.

High Output: It comes with 12 LED super flux F3 Piranha provide an ultra brightness to make your night safety, the light can stand by with 50,000 hrs lifespan but power saving, low temperature and low power consumption.

TMH with 1 year premium warranty (Free replacement under warranty)

[Pack of 4] 4” Clear Lens Amber round trailer tail light 12 LED provide an extra with F3 Piranha LED, low power consumption & low temperature, long lasting time 50,000 hrs.

Great Design: Durable & sturdy with high quality material ABS PC Lens with chrome bezel cover, no shade color lens; Perfect Effective: water resistant, shock and vibration proof.

6.5 inch amber 16 diode LED marker lights - Amber Lens with Chrome Bezel/Base. These side marker lights function at 12 volts dc current. Each led marker light contains 16 high-flux LEDs and consumes less energy than incandescent lamps;

These oval led marker lights can be used as a combination turn signal and running lamp. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. This trailer marker light is a flush mount style light and Mounting hardware not included;

Dimensions: 16.5cm(6-1/2") x 5.5cm(2") x 2cm(3/4"). Hole to Hole Distance: 118mm (about 4-5/8") ; can be function as marker light, clearance lights, turn signal lights; fits in a combo-style hole and Chrome bezel hides mounting screws; sonically-sealed lens and IP65 waterproof housing, please do not use it under water;

SUPER BRIGHT: 2Pcs 6.3" oval truck trailer led tail lights can be used as stop light, tail light, running light, and reversing light.Internal Miro Flex multi-surface reflector design provides higher light output and modern appearance.

DIMENSIONS:Drill hole: 6.5", Outer Diameter: 7.4", Inner Diameter: 6.3".LED Quantity: 23 LED(White 7 LEDs + Red 16 LEDs)

DURABLE: these oval truck trailer led tail lights are impact resistant and not easily damaged by impact. Each LED tail light is waterproof and sealed, which can effectively resist the invasion and corrosion of sand, dust, dust, rain, snow, etc.

Value Package: you will receive 8 pieces of 6 inch stop turn tail brake lights, each one includes the rubber flush grommet and 3-prong wire pigtail and plug; The light has 24 pcs LED, bright enough to improve the visibility and ensure safer driving; Our oval trailer lights can meet requirements for brake lights, taillights and turn signals

Brighter Lights for Safer Driving: these flush mount LED tail lights are equipped with 24 high-intensity red color LEDs and light-diffusing lenses, brighter than traditional clearance lights, can provide good performance; You can share with your neighbors, lovers, families and friends to enhance their safety on the road

Easy to Install: unlike traditional bezel-mounted brake lights, our LED tail lights don't need a large mounting hole, it has notches inside of grommet, designed for easy and quick installation; It also has a strong attaching ability between 3-prong plug, will help the light fit firmly on the grommet, no easy to shake, there will be no worries of loosing light or wires

2 LIGHTING PATTERNS - White light work as a reverse light, backup light; red light work as 3rd brake light, taillight, provides notice to drivers behind you when you are braking, enhanced safety & visibility at night.

HIGH QUALITY LED CHIPS - LED reverse light equipped with 4 pieces 4W high intensity led chips, which is low consumption but high brightness.

DURABLE CONSTRUCTION - LED 3RD brake lights are made of high quality aluminum housing, PC lens and 304 stainless steel mounting bracket, with black powder coated finish for rust and corrosion resistance.