Best Medca Mono Amplifiers in 2026

Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Class D MOSFET Monoblock Power Amplifier

Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts

Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz

Our ultra-compact (1.53” x 4.25” x 6.75”) Punch PBR300X2 2-channel amplifier packs a Punch with 300 Watts of power without sucking a lot of juice from your electrical system

Designed to be compact and efficient while providing big power (RMS Power Output: 100 Watts x 2 @ 4-Ohm OR 150 Watts x 2 @ 2-Ohm OR 300 Watts x 1 @ 4-Ohm Bridged)

Featuring our Class BR, Rockford Fosgate’s patented Boosted Rail technology that sips current while retaining a storage reserve for extended bursts of power. Perfect for smaller stealth installations, motorcycles and recreational vehicles

Power - 3000 Max x 1 @1-Ohm, 1500 Max x 1 @2-Ohms

Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry

1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to

5000 W MAX Power @ 1 Ohm x 1 Channel

2500 W MAX Power @ 2 Ohm x 1 Channel

1250 W MAX Power @ 4 Ohm x 1 Channel

📢 PEAK POWER: 1000 Watts

📢 RMS POWER: 【4 ohms: 180W x 1 chan.】【2 ohms: 320W x 1 chan.】【1 ohm: 500W x 1 chan.】

📢 COMPACT: Cutting edge Micro Class D technology allows amplifier to be extremely compact. Dimensions: 6.8"L x 3.3"W x 1.5"H

Maximum power @ 14. 4VDC - 2 x 50W RMS (stereo 2 ohms)

Maximum power consumption: 7. 6 amps (musical: 3. 8 amps)

Channels: 2, topology: class-d

MD 12000.1 - 0.5 ohm amplifier is developed with the highest technology and performance for automotive sound systems, in white color, to make your system more sophisticated, It is mono, with a single channel with a maximum power of 12.000 Watts RMS.

It is a FULL RANGE amplifier, playing all frequencies in the right measure for you, Operation class Class D, Number of Channels 01, Maximum power @ 12.6 VDC - 0.5 OHM: 12,000W RMS @ 12.6 VDC - 1 OHM: 7,200W RMS

Input Sensitivity 220mV, Signal to Noise Ratio >95dB, Frequency Response 10 Hz ~5 kHz (-3dB), Crossover high pass (HPF) 10 Hz ~90 Hz (-12dB/8th) Variable, Crossover low pass (LPF) 90 Hz ~5 kHz (-12dB/8th) Variable, Bass Boost Freq.: 35 Hz ~55 Hz

6-channel Headphone Mixing Distribution Amplifier with Individual Balance Controls

Output Level Controls with 8-segment LED Output Meters

Stereo Auxiliary Inputs

Dimensions (W x H x D): 12-5/8 inch x 2 inch x 6-5/8 inch

Operating Voltage: 14.4V（11-16V allowable）

Current Consumption: 60[A]

Package Includes: (1) Kicker 46CXA4001T CXA400.1 400 Watt Mono Class D Car Audio Amplifier Amp. (1) Kicker 46CXARCT Remote Control For 46CX 45CXA Series Amplifiers Amps

Features of 46CXA4001T: KICKER 46CXA4001T CXA400.1 400 Watt RMS Mono Class D Car Audio Amplifier Amp. Efficient Class-D amplifier. Three-second turn-on/off delay to eliminate unwanted interference. Variable 12dB crossovers provides control to dial in perfect sound. KickEQ 6dB variable bass boost for those additional low frequencies. 24dB subsonic filter for protection from potentially damaging frequencies.

FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio. Accepts up to 40-volt input signal. Small footprint for easier installation. Compatible with CXARC (link to remote) Remote Bass Control. Vertical mounting hardware included for another unique look. Dimension (L x W x H): 12 inch x 9 inch x 4 inch. Weight: 5 lbs

100W Stereo 8-Ohms, 190W Stereo 4-Ohms, 380W Mono 8-Ohms, 480W Mono 6-Ohms

132 dB SNR A-weighted

0.00011% THD+N

Premium 4-channel Class A/B amplifier for car audio and stereo systems for powerful speaker performance

Features remote bass control for customized equalization on playback and precise sound mixing within your system

Frequency response of 40 hertz, 2 Ohm stable, with a low pass filter of 40250 hertz and high pass filter of 505000 hertz

【MA400 Headphone Amplifier】LiNKFOR headphone amplifier has the effect of using condenser microphones with ultra-low noise direct insertion. It can provide reliable phantom power for condenser microphones. The GND LIFT button can be used to maintain the ground connection with the mixer to prevent static charges from interfering with your audio signal.

【Independent Volume Control】The headphone amp supports independent adjustment of the volume of the microphone signal and the volume of the mixer or Hi-Fi unit signal, and has a mono/stereo switch for switching to achieve maximum flexibility.

【Headphone Output】With 1/4'' and 1/8'' output jacks, it can be dapted to most headsets and make it convenient to use.

RMS Power - 1 ohm Mono: 2000W

RMS Power - 2 ohm Mono: 1000W

RMS Power - 4 ohm Mono: 500W

1-Ohm Minimum Impedance Monoblock Operation | Multi-color RGB LED Illumination Accent Lighting | Solid Color, Flashing, Random, or Slow-Motion Color Change | MOSFET Power Supply with Audiophile Grade IR Transisitors

Direct Short, Thermal and Overload Circuits Protect Amplifier | 200mV-6V Low Level RCA Input and Pre-Amp Output | Variable 12dB Low Pass and Subsonic Crossovers | 12dB Bass Boost Increases Low Octave Harmonics

DataLink for Strapping Two Amps for Double Power | Dash Mount Gain Control Module Included | RMS Power Rating: 800W x 1 at 4-Ohm | 1,400W x 1 at 2-Ohm | 2,500W x 1 at 1-Ohm | 3,000W x 1 at .5-Ohm | 6,000W Max Power

Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms

Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry

1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to

Package Includes: (1) KICKER 48VCWR122 CompR 12" 1000w Car Subwoofer+Vented Sub Box Enclosure Comp12. (1) Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp. (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's

Specification: Woofers (in, cm): [1] 12, 30. Impedance (Ohms): 2. Recommended Amp Power (watts RMS): 500. Peak Power Handling (watts): 1000. Sensitivity (dB 1w/1m): 90.8. Enclosure Top Depth (in, cm): 14-1/2, 36.8. Enclosure Height (in, cm): 16, 40.6. Enclosure Width (in, cm): 23, 58.4

Features of RWK41: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable. 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables. 17’ – 18 Gauge Blue Remote Cable. 17’ – 16 Gauge Clear Speaker Wire

Package Includes: (1) RockvilIe RXD-T2 Micro Class D Car Amplifier 2400w 2 Channel 2x400W CEA Rated. (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wire Kit w/RCA's. RockvilIe RXD-T2 Micro Class D Car Amplifier 2400 Watt 2 Channel 2x400W CEA Rated. Full-Range Class D Amplifier Architecture. CEA Compliant Power Ratings: 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N

1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD. 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD. Peak Power Ratings: 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged. Fully marine grade amplifier. Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more. Double Sided Surface Mount (SMD) PCB Design. High-Speed MOSFET Power Supply

Studio-Grade Bipolar Output Stage Transistors. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. Status Mode LED Indicator. 8 Volt Preamp Circuitry. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. Fully Adjustable 12dB / Octave Crossover

Class D MOSFET Monoblock Amplifier

Peak Power: 1x2000 @ 1 Ohm, 1x1500 @ 2 Ohms, 1x800 @ 4 Ohms

Frequency Response: 10Hz-500Hz, Built in switchable bass control: 0/+6/+12dB

RMS Power @ 4 ohm Stereo 100 x 4 watts RMS @ < 1.0% THD

RMS Power @ 2 ohm Stereo 150 x 4 watts RMS @ < 1.0% THD

RMS Power @ 4 ohm Mono 300 x 2 watts RMS @ < 1.0% THD

Ultra-compact, high density aluminum alloy chassis provides superior thermal stability | Four layer, glass epoxy circuit board for enhanced performance and reliability | Circuit board conformal coated (water resistant) for marine applications | Full Range Class D amplifier technology

Bridgeable for high power operation (CH1+CH2/CH3+CH4/CH5+CH6) | Balanced differential inputs for superior noise rejection | Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input | Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC)

Fully variable, 12dB per octave, electronic crossover | Remote level control for Channels 5 and 6 included | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Top mounted controls for convenient adjustment | Integrated soft clip light for quick system set-up | Illuminated logo

POWER ON: Atom series amps are built with sequenced delays to eliminate Residual power-up/power-down pops. Equipped with differential RCA inputs to isolate 12v audio to ground.

DESIGN: A Hybrid Aluminum Alloy Heatsink for optimum heat dissipation combined with an intricate MOSFET power supply full of Audiophile Grade IR Transistors. A Military Grade SMT PCB for Dynamic Performance finishes the stack.

SIGNAL: Volume low ESR Capacitance Banks compensate for power supply ripple. A set of individually regulated Preamp/Crossover components ensures signal purity.