Best Medca Mono Amplifiers in 2026

Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

500-Watt MOSFET 4-Channel Class A/B Power Marine Amplifier

RMS Power at 2 Ohms: 125 Watts x 4 Channels

RMS Power at 4 Ohms: 75 Watts x 4 Channel

HIGH-POWERED CAR AMPLIFIER: Enjoy serious sound beyond standard car speakers with our 3.5-inch class-D amplifier. This car amp has a max power output of 1,800 W and an input sensitivity of 0.2–5 V, so your car’s stereo can reach your desired volume.

PROFESSIONAL SOUNDS: Our car-audio amplifier’s total harmonic distortion (THD) is less than 0.15% for clearer audio. This loud amp also has a signal noise ratio of 70 dB, a frequency response of 8 Hz–180 kHz, and a crossover range of 5 Hz–50 kHz

ADJUSTABLE AMP: With a full MOSFET circuit design and simple bridging operation, this big amp is also phase, subsonic, level, and low-pass-filter adjustable. The included bass remote and knob aid with quick and easy control of the bass level.

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 750 Watts x 1 Channel <1% THD+N. - 4 Ohm: 450 Watts x 1 Channel <1% THD+N.

Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 3000 Watts x 1 Channel. - 4 Ohm: 1800 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch.

RMS Power Rating: 4 ohms: 500 watts x 1 chan. / 2 ohms: 800 watts x 1 chan. / 1 ohm: 1200 watts x 1 chan.

Pulse Width Modulated MOSFET power supply Wired remote bass level control included

Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection)

📢 PEAK POWER: 1000 Watts

📢 RMS POWER: 【4 ohms: 180W x 1 chan.】【2 ohms: 320W x 1 chan.】【1 ohm: 500W x 1 chan.】

📢 COMPACT: Cutting edge Micro Class D technology allows amplifier to be extremely compact. Dimensions: 6.8"L x 3.3"W x 1.5"H

6000 Watt Monoblock Class D Car Amplifier

RMS Power Rating: 1020W x 1 @ 1 Ohm / 720W x 1 @ 2 Ohms / 420W x 1 at 4 Ohms

Frequency Response (+/- 1db): 10Hz - 300Hz

Maximum power @ 14. 4VDC - 2 x 50W RMS (stereo 2 ohms)

Maximum power consumption: 7. 6 amps (musical: 3. 8 amps)

Channels: 2, topology: class-d

Power: 2500 watts max X 1 @1-ohm, 1250 watts max X 1 @2-ohms, 625 watts max X 1 @4-Ohms

Class D: power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry

1 ohm stable: able to continuously power loads of 1 ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to

Hifonics ZG-2400.1D Class D Amplifier + Gravity Magnet Phone Holder Bundle

Power Rating: 4 Ohms: 600 Watts x 1 2 Ohms: 1200 Watts x 1 1 Ohms: 2400 Watts x 1

Tone Control/Parametric EQ: Built-in bass control | PWM MOSFET Power Supply

MD 12000.1 - 0.5 ohm amplifier is developed with the highest technology and performance for automotive sound systems, in white color, to make your system more sophisticated, It is mono, with a single channel with a maximum power of 12.000 Watts RMS.

It is a FULL RANGE amplifier, playing all frequencies in the right measure for you, Operation class Class D, Number of Channels 01, Maximum power @ 12.6 VDC - 0.5 OHM: 12,000W RMS @ 12.6 VDC - 1 OHM: 7,200W RMS

Input Sensitivity 220mV, Signal to Noise Ratio >95dB, Frequency Response 10 Hz ~5 kHz (-3dB), Crossover high pass (HPF) 10 Hz ~90 Hz (-12dB/8th) Variable, Crossover low pass (LPF) 90 Hz ~5 kHz (-12dB/8th) Variable, Bass Boost Freq.: 35 Hz ~55 Hz

1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power; 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged

2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply; Series A/B car amplifier; Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion

INPUTS/OUTPUTS: Low level RCA inputs and outputs; Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA)

500 W MAX Power @ 2 Ohm x 2 Channels

250 W MAX Power @ 4 Ohm x 2 Channels

1000 W MAX Bridged Power @ 4 Ohm x 1 Channel

COMPACT DESIGN: Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 8.11″ depth x 8.11″ width x 2.60″ height

POWER: This amplifier is designed to run your stereo system with the power it needs to perform! 1200 Watts maximum dynamic RMS power output of 4x 300 Watts at 2 Ohms per channel. Its high efficiency rate of 84% provides more power with less battery consumption.

BRIDGEABLE: Double the power output to your speakers by bridging two channels. Minimum impedance of 4 Ohms per bridged channel at output power of 2 x 520 Watts RMS

Dimensions (W x H x D): 12-5/8 inch x 2 inch x 6-5/8 inch

Operating Voltage: 14.4V（11-16V allowable）

Current Consumption: 60[A]

Package Includes: (1) Kicker 46CXA4001T CXA400.1 400 Watt Mono Class D Car Audio Amplifier Amp. (1) Kicker 46CXARCT Remote Control For 46CX 45CXA Series Amplifiers Amps

Features of 46CXA4001T: KICKER 46CXA4001T CXA400.1 400 Watt RMS Mono Class D Car Audio Amplifier Amp. Efficient Class-D amplifier. Three-second turn-on/off delay to eliminate unwanted interference. Variable 12dB crossovers provides control to dial in perfect sound. KickEQ 6dB variable bass boost for those additional low frequencies. 24dB subsonic filter for protection from potentially damaging frequencies.

FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio. Accepts up to 40-volt input signal. Small footprint for easier installation. Compatible with CXARC (link to remote) Remote Bass Control. Vertical mounting hardware included for another unique look. Dimension (L x W x H): 12 inch x 9 inch x 4 inch. Weight: 5 lbs

Powerful and high-quality car audio amplifier with 3000 watts RMS output exclusive for BASS and SUB BASS applications

Built-in EQ Controls including Level, Crossover Subsonic Filter, and Low Pass Filter for customized sound

Bass Boost from 0dB to +10dB for enhanced bass performance. Up to 8 AWG Speakers connectors and up to 4 AWG power and ground connectors for powerful and stable operation

RMS Power - 1 ohm Mono: 2000W

RMS Power - 2 ohm Mono: 1000W

RMS Power - 4 ohm Mono: 500W

Package Includes: (1) KICKER 48VCWR122 CompR 12" 1000w Car Subwoofer+Vented Sub Box Enclosure Comp12. (1) Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp. (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's

Specification: Woofers (in, cm): [1] 12, 30. Impedance (Ohms): 2. Recommended Amp Power (watts RMS): 500. Peak Power Handling (watts): 1000. Sensitivity (dB 1w/1m): 90.8. Enclosure Top Depth (in, cm): 14-1/2, 36.8. Enclosure Height (in, cm): 16, 40.6. Enclosure Width (in, cm): 23, 58.4

Features of RWK41: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable. 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables. 17’ – 18 Gauge Blue Remote Cable. 17’ – 16 Gauge Clear Speaker Wire

Sound quality for BASS

Built exclusively for high performance on BASS Speakers

Low battery consumption

Remote IN: 7 ÷ 15 VDC - 1mA

Remote OUT: 12 VDC - 50mA

Fuse (Strip type): 100A

The flagship of our IX-series monoblock amplifiers, is the all-new, from the ground up, IX3.1. People kept asking, “I have a pair of Death Row subs, what amp should I run?” or “I have an IA Judge sub, what is the best amp?” Now you have that answer in the Incriminator Audio IX3.1, muscling up with 3,000 watts on tap to more than get the job done.

The IX3.1 is feature packed, with a bass remote that has a clipping light for control at your fingertips, an advanced crossover network to dial in the performance you want, and is fully strapable if you feel the need to get nuts and double up on a pair of IX3.1’s. No corners were cut when it came to designing the best 3,000 watt, compact monoblock on the market.

When you see specs like 16v capable, 8 gauge speaker wire outs, and 1/0 power & ground connections, you know right away, this IX3.1 was meant for one purpose only. Pure, clean, and controlled power, from a premium build, that is what you will always get when it comes to the IX3.1. Not only do you expect an amp of this quality and performance, but we expect it from ourselves. That is why we are very proud of the IX3.1 flagship monoblock amplifier.