Best Sliding Power Saws in 2026

[LIGHTWEIGHT & STURDY] This flexible and transportable table is tough enough to be a permanent fixture in your workshop, yet light enough to take from job to job. And it folds in half for easy storage and transport

[LEGS STAY SECURE] Metal legs won’t slide out on pavement or sink into soft ground. You’ll have a solid base to work on a project, or even to tailgate

[EASY STORAGE] It collapses in a second, so you can throw it in a corner and get it out of the way until the next time you need it

Powerful saw: 10 A powerful motor generates no load speed 5800RPM to slice through laminate flooring, wood, plastics, PVC pipe and plaster board at ease

Bevel and miter cuts: Not limited to making 0-degree cuts, the GALAX circular saw has multiple bevel and miter angles (0-45°), affording you the option of making your desired joint-forming cuts

Adjustable cutting depth: This circular saw has a depth adjustment lever that releases to allow for adjustment of the saw's base plate, perfect for plumbing applications such as taking up old floorboards. Max cutting depth is 2-1/2" at 90°and max cutting depth is 1-5/8" at 45°

[ONE-HAND OPERATION] The newly designed slim form factor makes the Worxsaw even lighter and more maneuverable. Grab it with one hand, and you’re good to go

[2” CUTTING CAPACITY] Made to cut up to 2” thick stock lumber. It’s made for quick rip cuts around the house, too, but lumber is where it really gets to work

[EASY DEPTH ADJUSTMENTS] Just press down the lever and raise or lower the main handle until you’re at the depth you desire for the project at hand

High torque motor 5-1/2-inch. Fast cutting blade for a variety of cuts

Tool-free depth of cut allows for easy depth adjustments

Bevel adjustment with detents at 45 and 90 degrees

15 amp motor running at 5,500 RPM provides power and speed through applications

Magnesium shoe, metal upper & lower guards provide added durability

Spindle lock and depth adjustment for quick adjustments on the job

LS1219L - Unique 2-Steel Rail Sliding System design offers single slide-glide operation; reduced saw footprint allows operation flush against a wall

LS1219L - Increased capacity for up to 8 inch crown molding (vertically nested), 6-3/4 inch baseboard (vertical), and 15 inch crosscuts at 90°

LS1219L - Innovative direct drive motor and guard system is engineered for increased vertical cutting capacity (5-1/4 inch) and linear ball bearing system engineered to deliver "dead-on" accurate cuts

EASY HANDLING: The main handle is comfortable for nearly any sized hand. There is an additional handle located farther in front of the tool that you can grip with your secondary hand for improved stability and precision in cutting

EASY DEPTH ADJUSTMENT: Simply unscrew the onboard knob to adjust the depth of cuts suited for a 7 1/4 inch blade

EASY BEVEL ADJUSTMENTS: Another knob is located on the side which you can loosen to adjust the beveling on this tool. Make slanted cuts at angles up to 56 degrees

Product 1: Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick

Product 1: Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left

Product 1: Onboard class II laser guide illuminates your line of cut

【Compact Power】13 Amp copper motor delivers 5500 RPM power for wood accurate cutting performance, Metal plate adds extra durability and safety, Product Size: 34.5cm x 25cm x 24.5cm, Saw weight 8.16 LB, AC Power Cord ;

【Extra 3 Blades】 24T/36T/40T, 【7-1/4“ Blades with 5/8” Diameter Arbor 】Blades for fast ripping in kinds of wood ; The included hex wrench can help you change the saw blade easily.

【Large Cutting Capacity 】Cut depth adjustment: 2-9/16" at 90°, 1-3/4" at 45° ; 0-45° bevel angles, Jellas circular saw tool afford you aggressive bevel cuts for a multitude of applications;

【Powerful and Efficient】Efficient brushless outer rotor motor provides 5500RPM no load speed, equipped with 3 kinds of saw blades, size 4-1/2 ", with Allen key for easy replacement: 24 TCT for wood/ 80 HCS for soft metal/ 60 Grit Diamond for tile

【Depth & Angle Adjustable】Angle adjusted freely at 0°- 45°; Depth adjusted freely from 0" to 1-1/2". Up to 1-1/2" at 90° and 1-1/16" at 45°. Angle and Depth adjustments help you make a variety of cuts in woodworking. Parallel guides ensure straight, precise cut

【Depth & Angle Adjustable】Angle adjusted freely at 0°- 45°; Depth adjusted freely from 0" to 1-1/2". Up to 1-1/2" at 90° and 1-1/16" at 45°. Angle and Depth adjustments help you make a variety of cuts in woodworking. Parallel guides ensure straight, precise cut

27,000 RPM for precision cuts. Great for cutting a variety of materials.

Accepts 1/8 in. and 1/4 in. bits for a variety of cutting applications. Spindle lock for easy bit changes with included 5/8” wrench.

Toolless depth adjustment for precise cuts in a variety of materials. Overmold grip provides control and comfort.

【Multi-scene use】High efficient motor reaches 27,000 RPM for precision cuts. Great for cutting a variety of materials.

【Fits Different Bits】Accepts 1/8 in. and 1/4 in. bits for variety cutting applications, spindle lock for easy bit changes.

【Precise & Fast】Tool-less depth adjustment for precise and fast cuts in a variety of materials.

Battery and charger sold separately. The powerful 24 volt brushless motor delivers 12,000 RPM to easily complete most tasks.

Capable of cutting a variety of material, such as wood, metal, brick, and ceramic tile, as well as surface preparation on concrete

Compact blade and a cutting depth of 7/8-in. Has multiple functions - cutting, plunge cutting, grinding, and flush cutting. Auxiliary handle can be used for 2 hand operation

[SMOOTH CUTTING] 4700 RPM no-load speed provides smoother cutting

[LASER GUIDELINE] For ultimate accuracy every time

[PERFECT FOR 2 X 4 CUTTING] 1-3/4” (46mm) cutting capacity with a compact design

【POWERFUL 3500 RPM COPPER MOTOR】Powered by 4A pure copper motor, 480W mini circular saw delivers 3500 RPM high cutting speed for cutting wood and PVC tube with ease. With a Saw Blade: 1 x 24T, which can satisfy all your versatile needs of this compact circular saw.

【0°-45° BEVEL CUTTING & 23-48CM VARIABLE DEPTH】Mini circular saw allows you to adjust the cutting angle from 0° to 45°. Cutting depths can also adjusted to a max cutting depth of up to 48cm at 90° and 23cm at 45°. The angle and depth adjustment meet your needs in various woodworking.

【PRECISE DEVICE & DUST EXTRACTION HOSE 】The guide and guide fence ensures a precise straight line for cutting wood and PVC tube, highly improve your work efficiency and cutting performance. The Left-sided blade design helps you to clearly see the cutting line. A dust extraction hose allows you to maintain a clean work environment.

[CUTS ALMOST ANYTHING] Wood, aluminum, tile, even vinyl siding—the motor spins the blade at 3500/min so you can slice through most materials with ease

[EASIER TO GRAB] The slim design makes the Versacut a circular saw you can operate with just one hand. Full-size circ saws can be cumbersome—just grab this saw and go

[WELL BALANCED] The rear motor construction gives this tool nice balance, so you’ll make more precise cuts

【POWERFUL MOTOR AND COMPACT SAW】705W/5.8Amp powerful motor provides 3500RPM No-Load Speed for cutting wood, metal, tile, aluminum plastics, and PVC tube with ease. 6 Blades: 2x24T TCT(115mm) for wood cuts/ 2x60T HSS(115mm) for wood and soft-metal cuts/ 2pcs grit diamond blade(115mm) for tile cuts, extending the applications of the compact circular saw. Great tool for home decoration and the perfect gift for woodworking and DIY lovers.

【ADJUSTABLE CUTTING DEPTH】ENVENTOR circular saw allows you to freely adjust the cutting angle from 0° to 45°. Cutting depths can also easily adjusted to a max cutting depth of up to 1-11/16" at 90° and 1-3/8" at 45°. The Angle and Depth adjustment helps you do various cutting in woodworking. The Left-sided blade design gives you a clear sight of the cutting line. A parallel guide attachment ensures straight, precise cuts easily and quickly.

【PRECISE LASER GUIDE and SAFE DESIGN】Legible laser guide can assist you to cut a precise straight line. Greatly improve your work efficiency. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case of any accidental start up. Grip with integrated safety trigger for safer control.

[High-Efficient and Clean Cutting] The mini circular saw is equipped with a 20V true brushless motor, which provides no-load speed up to 7000RPM for more efficient and clean-cutting. With 5.7" blades, the cordless circular saw allows you to cut multiple materials including wood, plastic, drywall, tile, metal, etc. The brushless motor provides more power and produces less heat to extend the motor service life, ideal as a long-term-use handy tool.

[Adjustable Cutting Angle & Depth] SCANS brushless Circular Saw for metal cutting helps you easily achieve bevel cuts and diverse cutting thicknesses with the angle adjustment knob and depth adjustment knob. The adjustable cutting depth is up to 1 1/5 inches at 45° and 2 1/10 inches at 90°. The adjustable feature makes this SCANS brushless circular saw for metal cutting suitable for DIYers, framers, or woodworkers.

[Durable Battery & Charger] The cordless circular saw for wood comes with a 4.0Ah battery and fast charging, providing comprehensive safety protections, including overcharge/discharge, overheating, and overload protection, ensuring a long service life. The large-capacity battery ensures sufficient and stable power during work. The battery indicator on the cordless circular saw for wood helps you know the power status and do a pre-charge in time.

4.8A Mini Circular Saw【POWERFUL MOTOR AND COMPACT SAW】580W/4.8Amp powerful motor provides 4000RPM no-load speed for cutting wood, metal, tile, aluminum plastics, and PVC tubes with ease. 3 Blades: 1x24T TCT(85mm) for woodcuts, 1x44T HSS(85mm) for wood and soft-metal cuts, and 1 grit diamond blade(85mm) for tile cuts, extending the applications of the compact circular saw. Great circular saw for home improvement and the perfect gift for woodworking and DIY lovers.

4.8A Mini Circular Saw【ERGONOMIC & SAFETY DESIGN】Compared to conventional compact circular saw, its lightweight and compact design makes it portable to carry both indoors and outdoors. The double protection switch prevents the machine from accidentally opening and promises a safer cutting job. The optimized ergonomic slim grip provides ease and less fatigue to one-handed operation. A thumb-activated Safety Trigger-Release Button prevents accidental trigger activation.

1500W Circular Saw【Powerful Electric Circular Saw】12-amp motor Circular saw with corded delivers 5,500-RPM, powerful 1500W for greater speed and faster cuts. A compact circular saw with 2 blades is ideal for laminate flooring, wood, plastics, PVC pipe, and plasterboard at ease. (1blade is 7-1/2"X5/8"X24T for wood, another blade is 7-1/2"X5/8"X40T for wood and soft-metal cuts)

[High-Efficient and Clean Cutting] The mini circular saw is equipped with a 20V true brushless motor, which provides no-load speed up to 7000RPM for more efficient and clean-cutting. With 5.7" blades, the cordless circular saw allows you to cut multiple materials including wood, plastic, drywall, tile, metal, etc. The brushless motor provides more power and produces less heat to extend the motor service life, ideal as a long-term-use handy tool.

[Adjustable Cutting Angle & Depth] SCANS brushless Circular Saw for metal cutting helps you easily achieve bevel cuts and diverse cutting thicknesses with the angle adjustment knob and depth adjustment knob. The adjustable cutting depth is up to 1 1/5 inches at 45° and 2 1/10 inches at 90°. The adjustable feature makes this SCANS brushless circular saw for metal cutting suitable for DIYers, framers, or woodworkers.

[Durable Battery & Charger] The cordless circular saw for wood comes with a 4.0Ah battery and fast charging, providing comprehensive safety protections, including overcharge/discharge, overheating, and overload protection, ensuring a long service life. The large-capacity battery ensures sufficient and stable power during work. The battery indicator on the cordless circular saw for wood helps you know the power status and do a pre-charge in time.

POWERFUL MOTOR AND COMPACT SAW: 705W/5.8Amp powerful motor provides 3500RPM No-Load Speed for cutting wood, metal, tile, aluminum plastics and PVC tube with ease. 6 Blades: 2x24T TCT(115mm) for wood cuts/ 2x60T HSS(115mm) for wood and soft-metal cuts/ 2pcs grit diamond blade(115mm) for tile cuts, extending the applications of the compact circular saw. Great tool for home decoration and perfect gift for woodworking and DIY lovers.

ADJUSTABLE CUTTING DEPTH: ENVENTOR circular saw allows you to freely adjust the cutting angle from 0° to 45°. Cutting depths can also easily adjusted to a max cutting depth of up to 1-11/16" at 90° and 1-3/8" at 45°. The Angle and Depth adjustment helps you do various cutting in woodworking. The Left-sided blade design gives you a clear sight for the cutting line.A parallel guide attachment ensures straight, precise cuts easily and quickly.

PRECISE LASER GUIDE and SAFE DESIGN: Legible laser guide can assist you to cut a precise straight line. Greatly improve your work efficiency. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.

Powerful 15 Amp motor and durable worm drive gears for pro performance and long life

Cut-Ready depth of cut system helps with quick accurate depth adjustments

A multi-function wrench has a variety of uses on the jobsite stores in the foot