Best Taien Pushbutton Switches Switches in 2026

▶【Easy to Install】- Simply install the receiver between the devices to be controlled and the power supply. You can switch your lights on and off from anywhere via the remote control switch panel. Expand your lighting system freely but not affect the existing system.

▶【Strong Signal】- IP66 waterproof, thus use safely even in damp places. The effective distance between the receiver and the control panel is up to 328ft indoors and 1969ft outdoors. Strong signal through the walls and remote control your bulbs, halogen lamps, fluorescent lamps, CFLs, LED lights, fans and other electrical switchboards, etc. max. Integrated power: 1000W.

▶【Dual Switch】- With the multi-switch function you can control 1 device with 2 independent switches. You could use one switch to replace the existing switch and the other as a remote control switch or three way switch. One Thinkbee Wireless receiver can hold up to 8 control panels. Ideal to control your garden shed, garage and exterior lighting comfortably from home!

This Push Button Switch Warranty 3 years . If there are quality problems within 3 years, you can send us email. We will send you new ones.

Special attention: Light connect to 110V -220V,Can light up ；Ith : 10A; Ui : 600V; Material : Plastic and Metal; Terminal Quantity : 4; Contact Type :1NO, 1NC; Action Type : Momentary.

Waterproof grade ：IP65;LED Button Color : Red, Green.Mount Hole Diameter : 22mm / 0.87"(7/8"); Fit Panel Thickness: Max 0.5cm / 0.2".

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New 16mm Latching Switch; Black Shell Ring LED; LED voltage: 12V only, Hole size required: 0.63''/16mm

Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC； 12 volt switch

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED 19mm Latching Push Button Switch; LED voltage: 12V only, Hole size required: 0.74''/19mm

Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

Water Drop Shape Paste Type DIY Button Switch, Small size rocker switch, does not occupy much space, rectangular design, sensitive keys, will not be triggered by mistake.

Easy to controll the circuit power OFF/ON. use power supply 7A/12V, maximum 10A/12V, voltage range: 0-220V, the higher the voltage, the current will decrease, 220V is less than 3.5A current.

Attached with black, white &black leads (Length: approximately 18.5"IN )

Mounting Hole Diameter: φ19mm

Red LED voltage: 12V only ; Switch Rating : 250V 5A

Shell Metarial:Stainless Steel (waterproof degsain)

Latching switch: Push it, ON; Push it again, OFF

With a wire connector (not included), you don't need to solder the terminals, make fitting very easy

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

● Poles: SPST - Push ON - Push OFF AC 250V/6A 125V/10A

● Water Drop Shape Paste Type Button Switch

● Electric Wire: 1sq approximately 19.6"in 39.3"in 78.7"in long

Operating Current: 6 (A)

Operation : Push-On, Push again-Off, SPST switch

Rectangular Base Measures: 17 x 14mm (0.67" x 0.56")

★ <strong>PERFECT FIT</strong> ★ This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car, simple to install. Gives your vehicle an upgrade with this factory look switch.

<strong>★ HIGH QUALITY ★ </strong>Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that lights up when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/LOWER Letters. Easy for you to know the working status.

<strong>★ STURDY DURABILITY ★ </strong>The switch is made out of heavy duty ABS plastic and they come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles and ensure years of service. Safe and long lasting.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4''/19mm

19mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO

This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car or truck

Etched directly onto the switch face using modern high tech engraving equipment to ensure long image life (This one is Blue. White & Green avaiable)

Black hard surface rocker, made out of heavy duty ABS plastic, surface size 1.54" x 0.83"

ON/OFF ILLUMINATED PUSH BUTTON SWITCH: 4 pin metal push-button switch, push it, remain on, push it again, get off. Mounting Hole: 19mm, the diameter of push button: 12mm.

EASY TO CONNECT & DURABLE: Latching switch with pre-soldered cable, convenient for wire connection, no need connector socket. Lifetime can up to 500,000 cycles, durable and antirust.

LIGHTED LATCHING PUSH BUTTON SWITCH: On/off push button switch with red indicator light, switch and LED ring light is separated, LED light can be on all the time or only on when the switch is in ON mode, it depends on how you wire it.

Push-button operation – Six presets turn on connected equipment for five minutes, 15 minutes, 30 minutes, one hour, two hours or four hours

No neutral – Replaces single-pole switches in switch boxes with no neutral wire required, which is perfect in older homes as well as in new construction

Wallplate included – A white wallplate for quick, single-gang installation is provided, and the in-wall timer fits rocker-style wallplates in multi-gang setups

Specifications: 12mm with LED self-locking button switch (5PCS).

How to use: press to turn on; press again to turn off. Contact configuration: 1NO.

Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

Brand New Silver Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 7/8''/22mm

22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC

★ <strong>PERFECT FIT</strong> ★ This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car, simple to install. Gives your vehicle an upgrade with this factory look switch.

<strong>★ HIGH QUALITY ★ </strong>Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that lights up when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/LOWER Letters. Easy for you to know the working status.

<strong>★ STURDY DURABILITY ★ </strong>The switch is made out of heavy duty ABS plastic and they come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles and ensure years of service. Safe and long lasting.

Specification: 19mm ON-OFF latching push button switch, black metal design with blue LED lights. Switch rating: 5A 12V DC. Mounting hole size required: 3/4 inches. Switch bezel diameter: 21.8mm.

Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances.

LED Illuminated: Push button switch with 12V blue LED light illuminated, If you want to use it in an 120VAC environment, please connect a 150KΩ resistor in series to the LED pin.

➤This is a unique SPST ON/OFF Push Button switch developed specifically for the pursuit of individuality and perfection in you.

➤Easy to controll the circuit power on/off，DIY Button Switch Water Drop Shape Paste Type

➤Attached leads (Length: approximately 78.7"IN )

Momentary switch operation type: Push & Hold,ON; Release,OFF；Pre-wired design:easy to install,save your time to connect wire to the switches.

Switch Shell Color: Black;Metal shell,100% brand new and high quality,mechanical life for 500,000 cycles；2 year warranty

Mounting Hole Size: Φ16mm, Switch Rating: 5A/250AC, Switch Combination : 1NO1NC

GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.

2 PCS Brand New Pre-wired 12mm Black Aluminium Alloy LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 0.5''/12mm

12mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO

Latching switch (ON/OFF switch): Push it, ON; Push it again, OFF

The newer model of U16C2, with a wire connector (not included), you don't need to solder the terminals, make fitting very easy

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Mounting Hole Size: Φ16mm (5/8 Inch), Switch Combination : 1NO1NC.

Operation Type : Latching/ Self-Locking [Push it - ON, push it again - OFF].

Ring LED can be on all the time or only when switch is on which depends on how you wire it.

★ 2 sets 16mm push button Blue LED light switch with IP67 & IK10 Protection, can be used in wet or dusty environment.

★ This on off ac switches come with 5 pins wire terminal with socket plug, don’t need soldering, make your work simple and easy! The LED light can be always on or only on when device working, it depends on how you connect the wire.

★ On/off push button switch type: Momentary push button and Latching push button for your choice. Momentary button switch operation method: press and hold the button –>ON, Release the button –> OFF. Latching button switch operation method: press the button–>ON, press the button again–> OFF.

12V Waterproof Push-Button Switch with quick connector, press once to open, then press again to close.

Push Button Switch with waterproof rubber boot, about 20cm AWG18 wire. 3M tape on the back and easy to install quick connector.

Ideal for any 12 volt DC application that requires a waterproof on/off push button switch.

Momentary (ON)/OFF switching. Press and hold for ON, release for OFF.

Blue angel eye LED ring illuminates when pressed

Pushbutton rated 3 amps at 12vdc

Momentary switch: Push & Hold,ON; Release,OFF

The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it

Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

Mounting hole size: 19mm; Head Diameter: 22mm

Latching switch: Push-ON; Push it again-OFF

Shell Metarial: Zinc aluminum alloy(waterproof and dustproof degsain)

Latching Type: Push it - ON, push it again – OFF

Mounting Hole Size: Φ12mm, Switch Rating: 2A/36V DC/AC, Switch Contacts: 1NO

Tiny Latching Switch: 1/2" diameter, suitable for tight space application

Mounting Hole diameter: 16mm

Type: Momentary, 1NO 1NC

Ambient Temperature: -25°C to + 55°C