Best Ayitam in 2026

HIGH PERFORMANCE CLAMP METER: PEAKMETER auto-ranging clamp meter can accurately measure AC/DC voltage up to 600V, AC current up to 600A (not for DC current), NCV, LPF,Diodes, Continuity function. High current can be measured, more widely used, more accurate data. Easy to carry and use, it also has a backlight and automatic shutdown function, which is a must for home improvement, industry, factory, solving automotive or electrical problems.

JAW DESIGN: The clamp measures AC current in a conductor up to 24mm (0.94 inch) without interrupting the circuit.

NCV FUNCTION: Non contact voltage detector can effectively detect voltage higher than 90V AC of conductor and beep with backlight flash.

MULTIFUNCTION LASER LEVEL: Using the latest measurement technology, this laser level is more accurate and safer and it has 2 Laser emitting heads,no need to adjust the head to point cross line making it easier to use.

4 in 1 ADVANCED MEASUREMENT ACCURACY LEVEL TOOL: This multipurpose line-level laser measurement tool equips 3 modes of laser level, 0-degree, 45-degree and 90-degree bubbles, 10FT/3M measure tape and 6.7IN/17CM ruler, Class 2 laser grade, Power output<1mW, ≤3.5mm line accuracy.

EASY TO OPERATE AND CARRY: Different from other multifunctional laser instruments, this one is designed with two laser heads and one on-off button to switch laser mode. Press the button once to horizontal laser, twice to vertical laser line, three times to cross laser line.

Voltbeat technology and continuous self test so you always know it is working

Upon detection, tip glows and beeper sounds

20 volt to 90 volt AC control circuit model also available

WIDE APPLICATIONS - KAIWEETS HT118A Multimeter measures up to 600V AC/DC voltage, 10A AC/DC current and 60 MOhms resistance, electrical tester also tests temperature, capacitance, frequency, duty-cycle, wire on-off, and test diodes and continuity.

EASY OPERATION - Switch the dial to the function you need, and the LED lights on the jacks will shine accordingly. To plug in the leads is easy. Autoranging saves you the hassle of having to know which range of value. Large 2.9” LCD backlight display, easy-to-read digits offer a 6000-count resolution.

MULTI-FUNCTION - Non-contact voltage testing and Live function with sound and light alarm. Flashlight on the back ensures easy use in dimly lit places. Min/Max/Average to record signal fluctuations. Stable kickstand, Pen slot on the back, Low battery prompt, Data retention, Auto power-off.

Versatile Digital Multimeter - Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Temperature

Thoughtful Design - Support Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make the process of measurements easier. Professional level is reflected in some features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage

Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately.

Accuracy: With 3/s Sampling Speed, this multimeter can accurately measure AC/DC Voltage, DC current (Not for AC current), Continuity, Amp, Resistance and Diode

Widely Used: This meter is capable of testing Household Outlets, Batteries (including 12V Automotive Battery), Continuity, Electrical Circuit, Fuses, Wires, Light Bulbs and Water Heaters

Multi-Feature: Large Backlight LCD Display with 3 ½ digits (1999 count) delivers your results clearly in dim light areas; Data Hold button holds a reading; Built-in Stand allows for hand free use; Low Battery Indication and Continuity Buzzer

True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.

LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.

NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.

VERSATILE DIGITAL MULTIMETER - Accurately measures AC/DC Voltage, DC Current, Resistance, and Diode. This Multimeter is a really useful tool for solving industrial and household electrical issues. Suitable for Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc.

TROUBLESHOOTING WITH Accuracy - This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.

ENSURES SAFETY - Double ceramic fuse is anti-burn and protects from overloading.The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks. And low battery indication will be displayed when battery power is low.

SAFETY FIRST: It will send out multiple alarms through sound and light. When the voltage is detected, the tip will send out red light and beep. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the screen will be red or green, red means high voltage and live wire are detected, green means low voltage and null wire are detected.

NON-CONTACT: With NCV inductive probe for AC voltage; Just place the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire. Ideal for breakpoint Test. Handy circuit tester for electricians, homeowners.

DUAL RANGE: Detects standard and low voltage (12-1000V AC / 48-1000V AC) for more sensitive and flexible measurements. Press the S button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring etc.; The NCV sensor automatically recognizes the voltage and displays it on the bar graph.

[Auto-Ranging Clamp Meter]: The meter measures AC Current to 600 amp, AC and DC Voltage to 600 V, Resistance to 40MΩ and Capacitance to 4MF. Does not measure DC Current.

[True-RMS Amp Meter]: The sensing meter accurately measures distorted waveforms and provides true readings when measuring linear or non-linear loads.

[Advanced Functions]: Auto-off of inactivity after 15 minutes, Data Hold, MAX/MIN Reading, Low Battery Indicator and Continuity Loud Buzzer.

3 test leads (red, black, green) connected to low-leakage probes

3 alligator clips (red, black, green)

2.6m lead length

Assured Protection-Using the high quality and eco-friendly EVA materials to make it sturdy and durable. Crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes, keep your multimeter in good condition.

Elastic Mesh Accessory Pouch-Conveniently stash and store your wire clips , cutters , chargers , probes and other accessories at your convenience.

Convenient Design--A small wrist strap is easy for you to carry it anywhere. You can hang it on your hand when working or just easily put it in your tools bag, handbag or backpack.

CL120 Clamp Meter measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads

Meter has backlit LCD for ease of viewing in low light and is CAT III 600V, Class 2 Double Insulated

RT210 detects the most common wiring problems in standard and GFCI receptacles

Constructed of black 600d Nylon

Has a heavy-duty PVC zipper and zinc alloy zipper tag

Convenient storage for meters, testers and tools

★Multifunction Use -- Comes with three modes of Soft shockproof lines, it fits different sizes digital multimeters: Fluke 117/115/116/114/113/106/107/101 Digital Multimeter and Fluke 87V 88V F15B+F17B+F18B+,Greenlee DM-45, Klein mm1000,Crenova MS8233D, Extech EX330 and IDEAL digital multimeter, Harbor Freight Cen-Tech meter （Case ONLY, Digital Multimeters are not included）

★Flexible Case-With the removable foams, you can DIY the foams into different shapes for many multimeters.Also, the attachable strap in the middle helps fix the multimeter ；no worries about falling out.

★Eco-friendly Materials -- Compared to the traditional EVA, our case is made of eco-friendly materials to prevent from the horrible smell. Besides, Made of High-density EVA and 1680D Material, premium Hard EVA to provide durability and a long-lasting performance.

VoltAlert technology for non-contact voltage detection

AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV

Low input impedance: helps prevent false readings due to ghost voltage

True-rms for accurate measurements on non-linear loads

safety rated

Large white LED Backlight to work in poorly lit areas

LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results

TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning

DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open (neutral and ground), reversed hot/ground, and reversed hot/neutral

The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps

The 117 multimeter features true RMS for accurate measurements on non-linear loads

The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage

Aenllosi Hard Case replacement for Fluke 101/106/107 Handheld Digital Multimeter

Features: Case is made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes

With Internal mesh pocket can store other accessories at your convenience

Durable nylon weave resists wear and tear

For use with CL120, CL220, CL320, CL390, CL600, CL700, CL800, CL900, ET600, MM325, MM420, MM720, and some older models

Constructed with powerful Rare-Earth magnets

Automatically measures volts ac and volts dc with precise digital resolution

Displays resistance to 1000Ω

Easy and accurate OpenJaw current measurement

Country of origin : China

Real-time sampling rate up to 1 gsa/use

IRecord length up to 14 Mpts

Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms

True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform

Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit

Compact clamp meter SC260 is designed for electrical HVACR service in hot & cold environment

Durable clamp meter with higher accuracy VAC & AAC readings, True RMS, temperature, capacitance and backlight

Non-contact voltage (NCV)  & amperage readings, continuity warning & diode test

Multimeter measures up to 600V AC/DC voltage, 10A AC/DC current and 40 MOhms resistance

Electrical tester measures temperature, capacitance, frequency, duty-cycle, and test diodes and continuity

CAT III 600V safety rating

Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance

Voltage tester for batteries, diodes and continuity

Built to withstand a 3.3-foot (1m) drop and withstand daily wear and tear on the job site

Cable tester tests voice (RJ11/12), data (RJ45) and video (coax F-connector) terminated cables with clearly defined results

Measure cable length up to 2000 feet (610 m)

Test for Open, Short, Miswire or Split-Pair faults

Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure DC current

The true RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform

Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits