Best Plastic Miter Saws in 2026

Compact design of DEWALT miter saw stand allows easy transport and storage

1000lb capacity (each) of DEWALT miter saw stand handles the toughest jobs

Lightweight aluminum construction (17 lbs.) allows for easy transport to and from the jobsite

Cuts solid, engineered and laminate flooring with ease

Makes cross, miter and rip cuts

Lightweight design for transport and use at any project location

Powerful 15 AMP direct drive motor for improved performance; 4,600 RPM

Dual post compound pivoting arm

Miter cuts 0°-45° left and 0°-52° right

3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

TOUGH AND PORTABLE – With a powerful 15 Amp motor and lighter, pressed steel base the S355CPSL has all the power you expect but with the portability you need. A chip deflector directs chips away from the operator and reduces cleaning time.

DRY-CUT, COOL TO TOUCH, BURR-FREE CUTS – The included premium tungsten carbide-tipped blade for mild steel cutting represents the latest in dry cut technology, significantly outperforming abrasives. Virtually eliminates sparks! Cuts your metals squarely and smoothly every time providing an instantly workable finish.

MITER SAW 0-45° ANGLE CAPABILITY – Make angle cuts effortlessly. Features a cast steel vise and fence with quick-release mechanism for safe, accurate and fast clamping of the workpiece.

Hydro lock water containment system keeps water contained near the blade and reduce clean-up time

Sliding side extension provides support for tiles up to 18 x 18-inch

Aluminum table top is a durable, rust-resistant surface

Powered by two LXT batteries; x2 LXT technology delivers more power, speed and run time without the hassles of a cord

Makita built electronically controlled BL motor delivers 4, 400 RPM for faster and smoother cutting

The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life

INCLUDED: 7-1/4-in 24-tooth framing/ripping blade, carrying bag and hex bar wrench

MOTOR: Powerful 15 Amp motor produces 6000 no-load RPM for smoother, faster, burn-free cuts

AWARD: Named Best Corded Budget Circular Saw for Pros in 2020 by Pro Tool Reviews

[SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

[CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts

[TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal

Ultra portable at just 31 pounds

Mounting brackets work with all brands of miter saws

Supports up to 500 lbs

For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood

Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned

Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals

Make bevel cuts up to 45 degrees left | perform compound Miter cuts with ease!

Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is inexpensive and versatile!

Laser cutting guide for quicker alignment and improved accuracy | Know where the cut will be ahead of time with the integrated laser guide!

PRECISION CUTTING - The advanced laser alignment system ensures accurate cuts every time!

HIGH-POWERED MOTOR - Comes standard with a powerful 1800 watt, 120V~60HZ, 15 amp motor.

VERSATILE DESIGN - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Cuts wood, plastic and aluminum (with correct blade). Cutting Capacity: Cross cut at 90 degrees: 3” x 12" (80 x 300 mm), Miter cut at 45 degrees: 3" x 8" (80 x 200 mm), Miter and Bevel compound cut at 45° and 45°: 1.5" x 8" (40 x 200 mm)

Powerful and Efficient - 3A powerful low noise induction motor band saw with 2500FPM blade speed and 1720RPM motor speed. The band saw adopts heat dissipation system to extend the service life. You don't have to worry about cutting back and forth due to low power, and the cutting surface is neat. It can slow down the vibration more than the ordinary band saw.

Sharp and Quick - The blade size of bandsaw is length: 59-1/2 inches, width: 1/8 ~ 3/8 inches. The maximum cutting depth is 3-1/2 inches, and the maximum cutting width is 9 inches.With strong and sharp blade and powerful 3A induction motor, band saw can cut different types of wood and soft metal accurately and quickly at the speed of 1720RPM.

Accurate and Multi Angle - Band Saws for Wood has a sturdy cast aluminum table tilting from 0°to 45°with 120°miter gauge. Rip fence for straight, accurate cuts. Band saw can cut straight line, curve and multi angle, which is an ideal choice for woodworking. Bandsaw for woodworking table size: 12-5/16" x 11-7/8".

Motor: 1/6 HP, 120V, 0.6A

Variable speed motor

Blade speed: 550-1600 SPM

[GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts

[TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site

[ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, Carbon and Aluminum arrow shafts, and mini model making

High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel- no sanding required!

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, arrow shafts, and mini model making

INCLUDES: Table Sled Body and Zero Clearance Fence, Miter Slot Stop and Knobs, Miter Bar, Blade Guard, Screwdriver and Installation Hardware

FUNCTION: This little sled is ideal for making high precision, small cuts on difficult woodworking projects with optimal safety for your fingers while cutting stock

FEATURES: Adjustable rear-mounted blade guard fits most table saws, a fence and base that allows you to run the saw through the width of material that is removed during the cutting process

【Powerful Cutting Performance】Equipped with high-power 15 Amp motor in low noise, this table saw delivers 5,000 RPM cutting performance to rip through various kind of hardwood with ease. And the heavy-duty table saw stand effectively prevents table from rollover during cutting.

【36 Tooth Blade & Aluminum Tabletop】Coated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding. Table saw features36T carbide-tipped blade, which is designed with transparent guard and riving knife to protect you from accidental hurt and flying chips.

【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting.

One tool, countless uses: the Bora QuickCut does the work of multiple tools, All with one useful saw guide. The multiple angles on this circular saw accessory eliminate the need for a miter saw or more complex jigs. Cut wood or soft metals with unrivaled precision at four preset angles: 22.5°, 45°, 60°, and 90°.

Mark, measure, and cut with ease: save yourself the calculations of a typical tri-square with bora’s advanced cut guide. Measure perfectly flush angles for framing and crown molding, without doing the math. The ruler also features imperial and metric measurements.

Easy grip: The large, curved handle provides extra comfort and precision. With the QuickCut, you can get a firm hold on your circular saw without your edge guide slipping.

[UPGRADED MOTOR]: The 6T version of the table saw has an upgraded 885-type high-torque motor with a power of 300W, a speed of up to 9000 revolutions per minute, ultra-high cutting force and low noise interference. At the same time, it is equipped with 7-level adjustable speed power supply, which can adapt to different cutting speeds by adjusting the speed. Attached English manual, which is clearly explained and detailed for your reference.

[ACCURACY & SAFETY]: Equipped with a straightedge, a miter gauge and a laser scale plate, which can realize high-precision and multi-angle cutting. The integrated steel frame structure and the thickened 5mm aluminum alloy table top are durable enough, ensuring a smooth cutting surface and excellent cutting effect. The transparent baffle meets the cutting safety, and the rubber feet at the four corners of the bottom are non-slip and shock-absorbing.

[LIFTABLE SAW BLADE]: The 110mm special alloy saw blade has high concentricity. Which can be raised and lowered by adjusting the screw hole on the table with an Allen wrench. The cutting depth is within the range of 0-29mm, allowing you to explore more possibilities in the DIY process!

Heavy duty steel frame design reduces flexing and features a superior finish and aluminum trunnion table support for long-lasting durability

1 HP, 115V/230V, 1 phase TEFC motor with 2 speeds: 1,620 FPM and 3,340 FPM for wood and non-ferrous metal cutting

Two-speed pulley with easy tensioning system

This portable table saw is designed for easy carrying, making it ideal for those who need to work on the go. Its compact size frees up valuable space on your workbench by replacing larger, bulkier woodworking tools. Perfect for both professionals and hobbyists, this lightweight saw won't add too much weight to your load.

The Mingfuxin table saw is a versatile hobby saw with multiple functions. It includes a grinding or fiber mill attachment, enabling it to be used for polishing or grinding, and can also be connected to a flexible shaft or drill chuck for engraving. This provides various options for DIY projects.

The high-powered motor of the hobby saw can reach up to 200W and 10000 RPM, ensuring quick project completion. The front dial provides speed control for precise cuts. With water bottle can make a wet saw.

⚙【Powerful Miter Saw】- WIth 15 AMP/1800W motor, full-size performance at 4500 RPM and the 40T TCT chop saw blade installed , HYCHIKA sliding compound miter saw provides superior cutting ability for crosscut and miter cuts,offering more possiblities for cutting various materials.Perfect for wood,plastic,aluminum alloy .

⚙️【Single Bevel Cutting&Laser Line】- Single-bevel allows the head to 45°cuts (L) up to 8-1/4inch*3-1/8 inch. With 9 positive stops, you can adjust the bevel angle to meet different cutting requirments and do accurate cutting.It's also equipped with a visible laser indicator to improve cutting accuraacy and predictable blade position.

⚙【Easier Bevel Cuts】- The extended table of this the miter saw offers a larger space .With vice clamping ensure better support and balance to prevent material from warping.Double linear sliding rail(max cutting up to 305mm/12in) design can ensure the cutting work more stable, more accurate. The sliding design extends the length of the cut, making it a more powerful miter saw .

Product 1: Power and Durability: 15 Amp, 4,000 Rpm Motor

Product 1: Miter Detent Plate Improves Productivity and Ensures Cutting Accuracy: Adjustable Stainless Steel Miter Detent Plate with 14 Positive Stops

Product 1: Miter Dentent Override That Allows You to Override the Miter Stops and Adjust to the Desired Setting Without the Saw Slipping into the Miter Detents. Arbor Size Is 5/8 Inches

This Mini Table Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, wood, plastic and other light materials.

This Benchtop Cut Off Miter Saw has adjustable miter gauge, perfect for all your DIY projects.

This precision bench saw makes perfect cuts in soft metals, wood and plastic in 1/10th the time it takes by hand.

【Adjustable Cut Depth】The height of the saw blade from the table top is adjustable, with a range of 0-0.59 inch. And this small table saw with a cut depth of 0-1/2 inch. We provide 4 commonly used circular saw blades, which can meet your basic cutting needs!

【Application】Suitable for PCB, Small wooden stick, Acrylic, Thin wood, Plastic, Model material cutting, Aluminum alloy, Iron and Stainless steel cutting, etc. With this small table saw you can easily make some small crafts, small woodworking projects!

【Convenient】It is a very tiny table saw, please check the machine size in the third picture (L x W x H) 7x5.5x3", weight 4.2 lbs, compact size, easy to carry and small space. Equipped with a transparent safety baffle, does not block your sight. It can perform 90° right-angle cutting and 45° bevel cutting.

Perfect solution for cutting of non-ferrous metal materials such as copper and aluminum, and stone,wood,glass,plastic etc non-metallic materials.

Wobble-free blade design for precision cuts.

Portable mini saw, low noise, high efficiency, equipped with alloy blade and diamond saw blade.

【Convenient & Handiness】This cordless circular saw weighs only 4.6 lbs along with battery, bringing less fatigue, suitable for continuous work. Small and compact size for excellent maneuverability and portability.

【Adjustable cutting angle】: The maximum depth of cut at 90°is 1-11/16”and bevel capacity at 45 °is 1-1/8”; Perfect for miter cuts, bevels, framing and edging; Angle guide and quick adjustment gives you a huge degree of versatility in your cuts.

【Powerful & Multifunctional】Powerful motor deliver up to 3,500 RPM for efficient cutting performance. You can use it for cutting wood, soft metals, PVC pipes, plastics with ease. The saw comes with 3 blades (4-1/2"): 24T TCT blade for wood cutting, plastic and other soft materials / 60T HSS blade for Aluminum and soft-metal cutting/ Diamond saw blade for tile or other simailar material. With the provided hex key, you can quickly install and remove the blade.

【Widely Applicable】This mini miter saw for crafts is suitable for cutting softwood, plastic, aluminum, copper, fiberglass, and brass, making it perfect for all your DIY projects.

【Accurate Cutting Saw】This mini miter cut-off chop saw for small precise jobs - Cutting soft wood, plastic, aluminum, copper, brass - cuts upto 1/2" thick wood or 1/2"dia 29 gauge metal tube.

【Adjustable Mini Chop Saw 】This mini chop saw for crafts cuts miter corners from 0° to 45° with adjustable miter guage, perfect for all your DIY projects.