Best Dbparts Screw Terminals in 2026

PARAMETER-----10 stainless steel #8 terminal screws,3*1/4" studs.

WHAT YOU GET-----Cover attaches with nylon nuts to the two outside studs to protect against accidental short circuits. Come with 1/4” and #8 suitable insulated ring terminals.No need to find the small rings anymore.

RANGE FOR USE---- Max voltage: 48VDC. Max continuous amperage: 150ADC. Max intermittent: 20 A per connection (less than 1 minute).

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

★【What You Get】 - In this terminal block set,it include 6pcs 4 positions 600V 15A double row screw terminal strip blocks with cover,6pcs 400V 15A pre-insulated barrier jumper strips,60pcs insulated fork wire connectors,1pc screwdriver.Total 73pcs packed in a bag.

★【Easy Install】 - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal.The fork terminal stripe can be cut in any position to meet with your different demand.You have the option of of making 4 individual connections or by using the whole barrier bar or part of it up to 4 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals.

★【Heavy Duty】 - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. The shell is made with flame resistant material, more safer. Copper plate conductor has good electrical conductivity and also nickel plated has a better anti-oxidation performance which make it more durable.

★【What You Get:】In this terminal block set, it include 5pcs 3 positions double row screw terminal strip blocks with cover, 5pcs black and red pre-insulated barrier jumper strips, 60pcs insulated fork wire connectors. Total 70pcs are well packed in a bag.

★【High Quality:】The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance (transparent dust cover is not flame retardant). High-quality brass guide, excellent electrical conductivity, the appearance of nickel-plated, rust and durable.

★【Product Feature:】The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite; Also include a clear cover to protect accidental touching of the terminal. Transparent cover, clear and intuitive internal components, allows for visual inspection of insert terminals.

Practical Terminal Block Kit:How to clean up your cluttered wire connection?Our double row screw terminal strip block can help you to connect bare wires to avoid clutter, making wiring connection simpler and more efficient.This way you can easily disconnect a wiring branch without taking down the entire system.

Product Feature:The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite; We also provide thick copper heat shrink wire connectors to ensures strong secure crimping every time.

Heavy Duty:The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance. High-quality insulated fork wire connectors kit is thick copper,with safe and durable.

【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 20pcs terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers, 1pcs 8" aluminum RoHS Rail, 4pcs ZB6 Marker strip.

【Terminal Blocks UK2.5B】The UK2.5B universal screw DIN rail terminal block series has the typical features which are decisive for practical applications. Made from engineering flame retardants nylon PA66 with brass screw metal.It can connect two conductors with ease, even large conductor cross sections are not a problem. Can be used on DIN Rail 35mm, steel or aluminum.

【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail.The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function.

Product name: screw terminal strip

Material: metal & plastic; rated value: 600V 25A

Size: L11.5 x W3 x H1.9 cm; color: black & GOLD Tone

★ Product ★ - A pair of 12V power distribution block, includes a red positive power distribution block and a black negative power distribution block.

★ 250A Rating ★ - The battery distribution block rated 250A when work in 12v circuit, and the battery terminal block can handle MAX 48V.

★ 5/16" Stud Terminal ★ - The battery bus bar terminal block includes 4 x 5/16" studs terminal and 3 x #8 screw terminals, which makes the 12V junction block able to accept large size terminal connectors and wires.

Features: Marine bus bar junction block 12v, these busbars will come in pairs, include one positive bus bar (red one) and one negative bus bar (black one).

Rating: Max voltage: 300V AC, 48V DC. Max continuous amperage: 130A AC, 150A DC. This battery distribution block will be suitable for both AC and DC systems.

Terminals: Each battery bus bar 12v includes - M8 (5/16") terminal studs x 4 and M4 (#8) screw terminals x 6, two power bus bars in the package - one positive bus bar and one ground bus bar.

Pitch: 2.54mm

Pin Number: 2

Rated Value: AC 300V 10A

Dual row with 6 positions Barrier Terminal Block

Clear plastic insulating cover is removable,screw barrier terminal block

Each pair of terminals is insulated from the next, prevent circuit in disorder

UL 600V

UL 10-22AWG

UL 30A

Durable material: these white terminal blocks adopt flame-retardant PP material shell, which have insulation, corrosion resistance and wear resistance; They can stand temperature between - 40 to 150 degrees Celsius, which have nice electrical conductivity

Nice performance: the plated zinc alloy screws and copper-plated zinc alloy terminals have nice stability and conductivity, which can serve you for a long time, enough quantity for you to use

Safe to use: the tightly screw can ensure reliable electrical contact, and helps prevent accidental contact with the terminal, so you can use it with confidence

【Safe and Reliable】Idong Power distribution block Selected flame-resistant material, safer than normal plastic,internal Copperplate conductor material, better conductive properties,And nickel-plated which has a long life, no corrosion, anti-aging

【Easy to use】First insert the wire into the ring terminal, then open the protective cover, and finally pass the screw through the terminal, and tighten the screw to fix the terminal. The wires will not come loose.

【Universal product】 providing maximum voltage: 300V AC, 48V DC and 130A AC, 150A DC current,Up to 10 circuits can be connected to a row. good protection for your boat, car, RV

Material: the base is made of hard plastic, the circuit board is made of copper, stainless steel terminal, PC protective sleeve, durable.

Model: Red base, M6 terminal stud x4, M4 screw terminal x 6.

Features: Maximum voltage: 300V AC, 48V DC. Maximum continuous amperage: 130A AC, 150A DC.

FANTASTIC DESIGN: 2 position, 3 position will be sold together. two row, 600V 36A, terminal block.

GREAT SIZE: 21 x 21 x 21 mm/0.83 x 0.83 x 0.83 inch, 33 x 21 x 21 mm/1.22 x 0.83 x 0.83 inch.

MODEL: H2519-2 and H2519-3. Package quantity: 5pcs.

UL 600V

UL 1/0-12AWG

UL 150A

【Package Includes】: 15PCS x PCB Teminal Blocks.

【Product Feature】: 6 Positions, Rated value: 150V 6A, Plug-In PCB terminal block connector.

【Easy To Use】: Handy and easy to assemble; Can be applied for PCB prototypes.

✿2.54mm Terminal Block: The package contains 20 x 4 pin PCB connector, rated voltage: 150V, rated current: 6A, wiring range: 24-12AWG.

✿High-Quality Material: The pin of the PCB screw terminal block is made of brass, which has good electrical conductivity. The shell of the PCB terminal block is made of plastic, flame-retardant and insulated, ensuring safety during use.

✿Wide Application Range: PCB terminal connectors are widely used in low frequency PCB wiring, 2.54mm pitch screw terminals are suitable for electronics, communication equipment, household appliances and alarm devices.

✯ Category: Ground Terminal Block; Type: USLKG2. 5N, Rated voltage/current: 690V/34A.

✯ Material: Nylon PA66 Housing + Alloy Copper Bodies + Nickel-plated Screws.

✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail.

Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32

Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools

Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers

UL 600V

UL 12-22AWG

UL 20A

【12 POSITION & 3A】12 position, 3A, 380V, 2 row terminal barrier strip wire connector

【SUITABLE WIRE】For cable: 1.5-2.5mm²

【SAFE & RELIABLE】Each pair of terminals is insulated from the next, preventing circuits from disorder.The set screws secure wires reliable contact and help prevent accidental contact with the terminals

【Parameter】 - Model:E/UK ; Mounting rail width: 35mm/1.38" ; Length: 42.1mm/1.66" ; Width: 9.5mm/0.37" ; Height: 35.3mm/1.39"

【Material】 - This terminal block is made of plastic material, and the screw fixed type is suitable for din rail

【Features】 - The sturdy structure can be firmly locked on the din rail. It is easy to insert the wire, and the screw terminal can firmly fix the wire

Safe Design : the terminal strips set come with transparent protection covers whick will shelter most exposed contact areas to reduce the risk of accidental touching, mounting the snap-in plastic covers after wiring. red and black jumpers to help customers distinguish positive and negative wire when installation

Neat Wiring Jobs : The dual row terminal strips are easy to install,you just need to fix wires with screws,you can connect each power wire very cleanly to each source (ground, battery, and ignition on), disconnect a wiring branch without taking down the entire system

Heavy Duty & High Quality : the GAJING terminal/barrier strips are well maded, The shell is made with flame-retardant polycarbonate,the Conductor is made with Nickel-Plated Copper which has excellent electrical conductivity and Anti-rust.

Package Dimensions: 9 L x 2 H x 5 W (inches)

Package Weight : 2 pounds

Only one screw to tighten

Package included:30x 2 Pin Terminal Block Connector+20x 3 Pin Terminal Block Connector.

Stable performance and fine workmanship .

Pitch:5mm,convenient to connect.

【High quality PCB carrier】This Terminal Block Connector is a High quality PCB carrier.

【 mount on DIN rail 】This Terminal Block Connector Can be mounted on DIN rail with width 15/32/35mm.

【application】This Terminal Block Connector is Suitable for PLC, Mitsubishi Servo and DIN rail mount.

UL 600V

UL 10-22AWG

UL 30A

★Stable & Reliable: The inside of the terminal strip is composed of electro galvanized alloy screws and copper zinc alloy terminals, which have good conductivity and stability.

★Insulated Matelril: These block connectors adopt flame-retardant PP material shell, which feature with insulation, corrosion resistance and wear resistance. The high temperature resistance of the terminal strip can reach 90℃.

★Custom Design: To meet your wiring needs, the terminal strip supports arbitrary cutting. You can cut the terminal strip into different sizes with scissors or knives according to your needs.