Best Goot in 2026

RoHS 2 compatible

depth 178 mm width 72 mm height 106 mm RPA2023 2023 mass weight 485

g both sponge and brass scrubber can be used to clean iron tips.

RoHS 2 compliant

96.5% tin - 3% silver - 0.5% copper

45g reel spool

Total length: 10.8 inches (275 mm) (when stored: 8.1 inches (205 mm)

Weight: 2.2 oz (65

Easy to hold and easy to use

Manufacturer Model Number: HG-905

Weight: 0.7 oz (20 g)

Quantity: 1

Manufacturer Model Number: HG-905

Weight: 20g

Quantity: 1

Manufacturer Model Number: HG-1100NB

Weight: 20g

Quantity: 1

Kester 24-6040-0027 - (1) Spool, 1 Pound per Spool

Diameter: 0.031" Inch (0.80mm)

Alloy: 60% Tin / 40% Lead (Product contains Halogen)

Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire

21-degree

2.5mm heat-treated carbon steel construction provides durability and long life

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

Easy-To-Use Adjustable Temperature Control Built Into The Handle

Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste

Fast Release Tool For The Quick-Change Nozzle System

The solder sucker has a large capacity cylinder and silicone tube at the tip for improved suction

[Uses] For solder removal of substrates

Nozzle is heat-resistant silicone tube that will not damage the object

Size: length 186 x width 84 mm.

Applicable models: FX-600, FX-601, PRESTO, DASH

Weight: 380 g.

10 Packs of Stained Glass Sheets

Size: 4 x 6 inches each

Great Variety of colors - These glass pack contains 10 assorted color sheets, no duplicate

4.5 ft of Low melting point alloy for IC removal.

Easily remove ICs without a Hot Air Station or Hot Air Gun.

Comes in convenient 6.5" lengths with instructions.

Make sure your next stained glass panel is straight and square!

Configure to fit panels up to 16" x 26"

Includes ten 6" blocks plus 40 push pins

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the magnetic plate. Clamp a project (circuits, jewelry, hobby model) securely in place so you can solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 4 magnetic, adjustable 16” and 8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Then move, rearrange and position to keep them steady so you work with accuracy.

WEIGHTED BASE: Rubber feet keep the large powder coated steel 6” x 9” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with precision!

WHEN YOU NEED A HAND: Bolt your PanaVise (not included) to the mount then place the flexible, adjustable gooseneck arms anywhere on the magnetic plate. Clamp a project (circuit board) to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Mount the PanaVise (hardware included) then clip the project to the 360° rotating alligator clamps with locking thumb nuts. Connect, move and position 4 magnetic, adjustable arms to the steel base so you work with ease.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 4.6 lb heavy base from sliding and stable. Wherever you stick the arms - the oval base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the XL magnetic plate. Clamp a large project (circuit board, jewelry, drone) securely in place to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 5 magnetic, adjustable 16”/12”/8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Move, rearrange and position to keep them steady so you can work with accuracy.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 8.5” x 11” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

【Multi-Function】Silicone work mat built-in scale ruler (0 ~38 cm/0~15 in), 124 screws position and 3 pcs magnetic parts areas and 18 notches to classify precision parts,which improve your work efficiency and make the maintenance platform cleaner and tidy.

【Heat Insulation】Heat insulation mat can resist the temperature as high as 500℃ and is anti-corrosive also,Its texture is soft, supports high temperature soldering work directly, which can protect maintenance platform from damage.

【Anti-Slip】Both surface and back side are adopting the anti-slip design, it won't slide around on your counter or station, and its attractive design keeps small parts from sliding, which prevent them from losting or misplacing.

12 grams each / 10 per pack

Used for cleaning soldering tips

Material Composition: 100% brass

For workplace/occupational applications only

Provides at least 95% filter efficiency against solid and liquid aerosols as well as certain organic vapors

Each respirator kit contains (1) face piece, (1) pair of 6001 cartridges, (1) pair of 501 retainers and (2) pair of 5P71 filters

【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.

【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.

【Alloy Braided Solder Wick】Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.

7/32" copper foil

By Edco

Upgrade Product: Circuit Board Holder has four pillars, each pillar is magnetic, adjustable magnetic helping hands can be positioned anywhere on the heavy steel base, which can stuck any shape of the board.

Magnetic Flexible Arms: 4 adjustable metal gooseneck arms with strong magnetic base,which have a powerful attraction to the steel base. We included two 9" arms, two 4.5" arms helping hand arms, Completely free your hands up and work easier than ever before.

Stainless Steel Base: 9 x 6 inch powder coated steel base with non-slip rubber pads, keep the soldering helping hands from sliding around on your bench.

Can be operated standing up or laying down in a low-profile position

Low profile position provides approximately 2-1/2 times the airflow and efficiency

ESD-safe by design and is made of ESD-safe materials

Active range 1050°F - 1800°F

1lb Jar

Made in USA

Solder Paste

Leaded

No Clean

Includes (4) brazing rods .050 inch x 1/8 inch x 20 inches Stay-Silv 15% Flat Brazing Rods

Uses for many copper-to-copper applications where moderate fit-up can be maintained and brazing temperature is not critical.

Solidus Temperature: 1190°F, 643°C | Liquidus Temperature: 1475°F, 802°C | Recommended Brazing Range: 1300-1500°F, 705-815°C

100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering; 0.1" hole spacing for DIP integrated circuits and headers.

THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions

MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use; With pre-tinned plated holes; Double sided board with plated-thru holes allows components to be easily soldered to either side of the board

Premium quality ER309L stainless steel TIG welding rods with available diameters 0.045", 1/16", 3/32" and 1/8"; 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER309L; 36" (914mm) length of rod with single end stamped; typical chemical composition %: C=0.025, Cr=24.5, Ni=13, Si=0.38, Mo=0.35, Mn=1.88, Cu=0.35, P=0.02, S=0.01, remain=Fe.

Features and Applications: filler metal ER309L rod for TIG welding (GTAW) process to weld dissimilar alloys like mild steel and the stainless steels, and also for direct overlay on mild steel for corrosion applications; occasionally used for welding "18-8" base metals when severe corrosion conditions exist or dissimilar metals; ER309L stainless steel exhibits high strength and good toughness over a wide range of temperatures; shielding gas required, usually 100% Argon.