Best Rockford Fosgate Multichannel Amplifiers in 2026

High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.

Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.

Detachable sliding terminal cover offers a sleek design and easier installation.

The R2-750X5 full-range class-D 5-channel amplifier (1.9" x 6.8" x 11.2") is packed with features and performance to deliver power and bass on demand with 750 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @ 4Ω OR 100 Watts x 4 + 350 Watts x 1 @ 2Ω OR 200 Watts x 2 + N/A @ 4Ω Bridged/Mono)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Power - 550 Max x 4 @2-Ohms, 275 Max x 4 @4-Ohms, 1100 Max x 2 Bridged @4 Ohms

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.

RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.

Competition Grade Class D MOSFET Power Amplifier

Peak Power at 1 Ohm: 5, 400 Watts | RMS Power at 1 Ohm: 3, 500 Watts

Stable at 1 ohm | Remote Subwoofer Level Control Included

Complete 4 Gauge Amplifier Installation Kit

For Amplifiers Up To 1200 Watts RMS

Premium (CCA) Copper Clad Aluminum

Two Amplified Output Ports (Gain: 11.5 dB)

Works with all TV Antennas & CATV Installations (Not Compatible with Satellite)

Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels

1 x Taramps TS400X4 Full Range Amplifier

Quantity: 1 Amplifier Number of Channels: 04 Max Power at 13.8 VDC 2 Ohms: 400W (4 x 100W RMS) Max Power at: 13.8 VDC 4 Ohms: 252W (4 x 63W RMS) Bridged at 13.8 VDC 4 Ohms: 400W (2 x 200W RMS)

Input Sensitivity: 200mV (Vol=Max) Signal to Noise Ratio: greater than 90dB Frequency Response: (Full Range): 18Hz to 30kHz (-3dB) High Pass Crossover (HPF): 90Hz (-12dB / 8th) Low Pass Crossover (LPF): 90Hz (-12dB / 8th)

HUGE POWER IN A SMALL PACKAGE - 3,000 Watts gives you all the power you need tucked away and out of sight, keeping your vehicle looking clean and neat.

WIDE RANGE OF APPLICATIONS - Ranging from 1-4 ohms, this amplifier will allow you to use a variety of speakers for your specific application. Never again will you need to worry about having the right amp for the job.

BASS KNOB INCLUDED - The Candy XXL1B amplifier comes with a remote bass knob included. Always have control over the bass levels depending on what genre music you're listening to.

Power - 300 watts max x 4 @2-Ohms plus 5th channel 600 watts max x 1 @2-Ohms, 150 watts max x 4 @4-Ohms plus 5th channel 300 watts max x 1 @-4-Ohms, 600 watts max x 2 bridged @4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.

SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Chrome RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.

INTELLIGENT DESIGN: The car audio amplifier 5 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.

100 W MAX Power @ 2 Ohm x 2 Channels

50 W MAX Power @ 4 Ohm x 2 Channels

Full-Range, Class A / B Topology

110 W/Ch. (6 Ohms, 1 kHz, 0.9% THD, 1 Channel Driven, FTC); 65 W/Ch. (8 Ohms, 20 Hz-20 kHz, 0.7% THD, 2 Channels Driven, FTC)

HDMI 2.0a Support for 4K/60 Hz, 3D,Audio Return Channel, DeepColor, x.v.Color, Lip-sync, Dolby True HD, DTS-HD Master Audio, DVD-Audio, Super Audio CD, Multichannel PCM, and CEC

Built-in Bluetooth to stream virtually any audio from your smartphone, tablet, or PC to your home theater for clear and powerful sound

Rubicon Nano 2000W Class D 5-CH Marine amplifier

High Efficiency Class D Full Range Amplifiers. 2-ohm Stereo & 4-ohm Bridged Class D Full Range

Hybrid Aluminum Alloy Heatsink for Optimum Dissipation

1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power; 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged

2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply; Series A/B car amplifier; Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion

INPUTS/OUTPUTS: Low level RCA inputs and outputs; Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA)

Operating voltage 9 – 16V RMS power @ 4 ohms 90WRMS power @ 2 ohms 110W RMS bridged power @ 4 ohms 220W Total peak power 880W

Frequency response 20Hz – 20kHz @ -1dB THD + N at rated power (20Hz – 20kHz)<1% Line-in signal-to-noise ratio (reference to 1 watt)>75dB

Maximum high input signal level 12V High input maximum sensitivity 0.5V Maximum line input signal level 5V Line input maximum sensitivity 0.2V

HIGH PERFORMANCE CAR AUDIO AMPLIFIER | One of the best values you will find for a car amplifier for cars in the market! This 12v car amplifier features: 120W x 4 RMS @ 2 Ohm / 200W x 4 MAX, Freq: 10Hz - 35KHz, <0.1% TDH, Built-In OEM Line Converter, Bass Boost 0~12dB, and Ground Loop Isolator. 12-volt output, This multi-channel amplifier for cars provides a real punch for your cars speakers or subwoofers!

PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding or underperforming car amplifiers. Your car audio system would not be complete without our multi-channel Massive amplifier. This car audio amplifier features: Built-in OEM line converters with RCA inputs that can take a high-level speaker signal at up to 9 Volts directly in. Full MOSFET with High Grade Switching Devices. Input Level 0.2-9.0v

QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS RATED POWER | Get more wattage and quality sound for less money! That is our guarantee! You don't need to set the gains to low to avoid distortion. These car amplifiers provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry.

Class-D amplifier design delivers higher efficiency and greater output.

Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.

Conformal coated PCBs provide extra protection from the marine elements.

Configurable as 6/5/4/3/2 channel amplifier

6 x 200 watts @ 2 ohms - 6 x 125 watts @ 4 ohms

400 watts @ 4 ohms bridged - AccuBASS Processing

DS18 Hydro NXL800.5D full range digital Marine five channel stereo amplifier with remote gain control

RMS output @ 4-ohms: 4 x 80 + 200 watts. @ 2-ohms 4 x 125 + 300 watts. @ 4-ohms bridged: 2 x 250 watts. Frequency response: 20 - 20Khz.

Signal to noise ratio: > 95Db. Selectable x-over: LPF/flat/hpf. Lpf/hpf filter: 40Hz - 3Khz.

Awesome sound quality

Output wattage: 4000.0

Package Weight: 5.09 kilograms

This listing contains: (1) V1200.5 2400 Watt 5 Channel Class A/B Amplifier (1) Remote Bass Knob with Connector cable

4 x 75W + 1 x 300W @ 4 Ohms 4 x 150W + 1 x 600W @ 2 Ohms 2 x 300W + 1 x 300W @ 4 Ohm N/A + 1 x 600 @ 2 Ohm

Features: Nickel Plated Terminals Low Level Inputs Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy FR Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V Phase Control: 0 - 180 Degree 45Hz Bass Boost: 0 - 12dB S/N Ratio: > 85dB THD: 0.08%

4 Channels Full Range Digital Amplifier with Bridgeable Technology and IPX65 Waterproof Amplifier

Four-Channel, 2 Ohm and 4 Ohm Stable 600 W RMS with 150W x 4 @ 2 Ohm Load, 300W x 2 @ 4 Ohm Bridged

For Stereo Front and Rear Systems Micro Compact for little space with Size 1.5 x 4.25 x 9.50 inches

M-Equalization bass boost allows for both frequency and Q factor adjustment for precise tuning of your system

RMS POWER 2Ω (w) - 100 x 4 + 500 x 1

RMS POWER 4Ω (w) - 75 x 4 + 300 x 1

KXM Series 1200 Watt Marine Subwoofer Amplifier

Continuous RMS Power [watts/channel] @ 14.4V, 2-Ohm mono

24dB/octave, variable 40-160Hz, low pass only;

Arc Audio X2 850.5 Multi-Channel Amplifier (5-Channels)

Microprocessor Class-D Design

High-Frequency Power Supply Design For Improved Signal Transparency And Overall Sound Quality)

1000W Max Class AB @ 2 Ohm, Stable at 2 Ohm and 4 Ohm with Bass Knob Included

S/N Ratio > 70 dB with and Input Sensitivity at 200mV-6V with Input IMP at 22k Ohms

HPF at 80 Hz ~ 1.2 kHz with LPF at 50 Hz ~ 250 Hz and Frequency Response at 10 Hz ~ 30 kHz

Independent Multi-Room audio haven: With the rack-mountable DAX88 home audio amplifier powering up multiple speakers in the same wired system is simple while also distributing unique audio to your customizable, dedicated zones.

High Power: With 8 sources and 8 zones, the DAX88 delivers the ultimate customizable multi-zone audio experience. Delivering 75 watts per channel or up to 180 watts with the ability to bridge channels, the DAX88 multichannel amplifier has enough power to give you an immersive listening experience.

Analog or Digital: The DAX88 offers a wide array of analog and digital inputs and outputs, including integrated Wi-Fi, Streaming Options, and multiple ports for all your devices.

Package Includes: (1) Power Acoustik RE4-2000D 2000 Watt 4-Channel Car Stereo Amplifier Amp. (1) RockvilIe RWK42 4 Gauge 4 Channel Complete Wire Kit With (2) RCA Cables. Features of RE4-2000D: Power Acoustik RE4-2000D 2000 Watt 4-Channel Car Amplifier

4 Channel Full Range Operation 2-Ohm Stable Class A/B Amplifier. MAX Power: 2000 Watts. 4 Ohm RMS: 175 Watts x 4. 2 Ohm RMS: 250 Watts x 4. 4 Ohm RMS Bridged: 500W x 2. Direct Short, Thermal, & Overload Circuits Protection. 200mV-6V High Level or Low Level RCA Input. Tri-Mode Capable

Variable 12dB High, Low, & Subsonic Crossovers. Variable 12dB Band-Pass Crossovers. Direct Wire 4ga. Power & 12ga Speaker Terminals. Product Dimensions (L x W x H): 13" x 8.5" x 2.2" inches. Features: RockvilIeRWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit

Class-D amplifier design delivers higher efficiency and greater output.

Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.

Conformal coated PCBs provide extra protection from the marine elements.