Best Rockford Fosgate Multichannel Amplifiers in 2026

The R2-300X4 full-range class-D 4-channel amplifier (1.9" x 6.8" x 10.1") is packed with features and performance to deliver power and bass on demand with 300 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 @ 4Ω OR 75 Watts x 4 @ 2Ω OR 150 Watts x 2 @ 4Ω Bridged/Mono)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Power - 550 Max x 4 @2-Ohms, 275 Max x 4 @4-Ohms, 1100 Max x 2 Bridged @4 Ohms

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.

RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.

1 x Taramps TS400X4 Full Range Amplifier

Quantity: 1 Amplifier Number of Channels: 04 Max Power at 13.8 VDC 2 Ohms: 400W (4 x 100W RMS) Max Power at: 13.8 VDC 4 Ohms: 252W (4 x 63W RMS) Bridged at 13.8 VDC 4 Ohms: 400W (2 x 200W RMS)

Input Sensitivity: 200mV (Vol=Max) Signal to Noise Ratio: greater than 90dB Frequency Response: (Full Range): 18Hz to 30kHz (-3dB) High Pass Crossover (HPF): 90Hz (-12dB / 8th) Low Pass Crossover (LPF): 90Hz (-12dB / 8th)

HUGE POWER IN A SMALL PACKAGE - 2,000 Watts gives you all the power you need tucked away and out of sight, keeping your vehicle looking clean and neat.

WIDE RANGE OF APPLICATIONS - Ranging from 1-8 ohms, this amplifier will allow you to use a variety of speakers for your specific application. Never again will you need to worry about having the right amp for the job.

BASS KNOB INCLUDED - The Candy X5B amplifier comes with a remote bass knob included. Always have control over the bass levels depending on what genre music you're listening to.

1600W Maximum Power Full-Range Amplifier With Bluetooth

Optimized 150-watt RMS output and a max power output of 1600 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road

This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system

8 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA820 is engineered as a 8 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters.

PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level inputs.

SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions.

4 x 250W RMS @ 4 OHMS - Bass Boost Circuit - Low Pass Filter Controls - S/N Ratio: >90dB - Subwoofer Remote Level Control

4 x 500W Max @ 4 OHMS - Bridgeable at 4 Ohms - High Pass Filter Controls - Channel Separation: >65dB - Fuse: 20A x 2

2 x 1000W Max @ 4 OHMS Bridged - 2 Ohm Stereo Stable - Power and Protection LED Indicators - Freq. Response: 10Hz-45KHz - Dimensions: 14.96''(L) x 2.24''(H) x 8.81''(W)

400 W MAX Power @ 2 Ohm x 4 Channels

200 W MAX Power @ 4 Ohm x 4 Channels

800 W MAX Bridged Power @ 4 Ohm x 2 Channels

100 W MAX Power @ 2 Ohm x 2 Channels

50 W MAX Power @ 4 Ohm x 2 Channels

Full-Range, Class A / B Topology

1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power; 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged

2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply; Series A/B car amplifier; Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion

INPUTS/OUTPUTS: Low level RCA inputs and outputs; Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA)

Operating voltage 9 – 16V RMS power @ 4 ohms 90WRMS power @ 2 ohms 110W RMS bridged power @ 4 ohms 220W Total peak power 880W

Frequency response 20Hz – 20kHz @ -1dB THD + N at rated power (20Hz – 20kHz)<1% Line-in signal-to-noise ratio (reference to 1 watt)>75dB

Maximum high input signal level 12V High input maximum sensitivity 0.5V Maximum line input signal level 5V Line input maximum sensitivity 0.2V

Hifonics ZG-600.4 Class A/B Amplifier + Gravity Magnet Phone Holder Bundle

Power Rating: 4 Ohms: 75 Watts x 4 2 Ohms: 150 Watts x 4 Bridged @ 4 Ohms: 300 x 2

Tone Control/Parametric EQ: Built-in bass control | PWM MOSFET Power Supply

Class-D amplifier design delivers higher efficiency and greater output.

Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.

Conformal coated PCBs provide extra protection from the marine elements.

4-channel car amplifier / 70 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)

Class AB amp technology / 100 dB signal-to-noise ratio, 0.05% distortion

variable high- and low-pass filters (40-400 Hz, 12 dB/octave) on front and rear channels

Configurable as 5 or 3 channel amplifier

3-way Independent Linkwitz-Riley Alignment crossovers

Summable active speaker-level inputs (8 channels) for OEM integration

Sends 1 Composite RCA signal simultaneously to 8 different displays. All outputs are mirrored, identical.

Supports PAL and NTSC signals.

Buffered Input and amplified outputs. Gold plated RCA jacks

Package Includes: (1) Power Acoustik RE4-2000D 2000 Watt 4-Channel Car Stereo Amplifier Amp. (1) RockvilIe RWK42 4 Gauge 4 Channel Complete Wire Kit With (2) RCA Cables. Features of RE4-2000D: Power Acoustik RE4-2000D 2000 Watt 4-Channel Car Amplifier

4 Channel Full Range Operation 2-Ohm Stable Class A/B Amplifier. MAX Power: 2000 Watts. 4 Ohm RMS: 175 Watts x 4. 2 Ohm RMS: 250 Watts x 4. 4 Ohm RMS Bridged: 500W x 2. Direct Short, Thermal, & Overload Circuits Protection. 200mV-6V High Level or Low Level RCA Input. Tri-Mode Capable

Variable 12dB High, Low, & Subsonic Crossovers. Variable 12dB Band-Pass Crossovers. Direct Wire 4ga. Power & 12ga Speaker Terminals. Product Dimensions (L x W x H): 13" x 8.5" x 2.2" inches. Features: RockvilIeRWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit

Class-D amplifier design delivers higher efficiency and greater output.

Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.

Conformal coated PCBs provide extra protection from the marine elements.

4-channel car amplifier | 50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) | 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable when bridged)

Variable low-pass filters (30-250 Hz, 12 dB/octave) | Variable high-pass filters (50-1000 Hz, 12 dB/octave)

Selectable bass boosts (0, 6, 12 dB at 45 Hz) | Preamp and speaker-level inputs

Class D 4-channel amplifier | 150 watts RMS x 4 at 4 ohms (200 watts RMS x 4 at 2 ohms) | 400 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)

CEA-2006 compliant | High-, low- and bandpass crossovers: 50-4000 Hz (12dB/oct.) | Heat dispersing aluminum chassis

High-level inputs with auto-detection & auto turn-on; RCA low-level inputs | Frequency response: 20-20,000 Hz

SOLID 1 - Focal Monoblock 470 W RMS Power Amplifier + SOLID 2 Black - Focal 2-Channel 200W RMS Power Amplifier

Solid-1: Power RMS (4 Ohms)1 x 300W | (2 Ohms)1 x 470W | (2 Ohms) 1 x 940W Max

Solid-2 Power: 75 watts RMS x 2 at 4 ohms (100 watts RMS x 2 at 2 ohms) | 200 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)

Sends 1 S-Video signal simultaneously to 8 different displays. All outputs are mirrored, identical.

Supports PAL and NTSC signals.

Buffered Input and amplified outputs. Gold plated RCA jacks

The all new Incriminator Audio IX3.4 is the new answer to compact, premium 4 channel amplifiers. All the features of the outstanding IA 3.4 but with more power and less size, updated to the new IX series standards. When we say compact, we are not joking around. The new IX3.4 is trimmed down to a miniscule footprint of less than 8”. That saves you space but doesn’t cut down on the traditional high quality build we are known for in our world famous amps.

One thing you don’t have to worry about is the crossovers, as we still have the same level of flexibility in the crossover network our customers have come to expect from our multi-channel amplifiers. Which means, you will have high-pass / full range / low-pass crossover settings for both pairs of channels, as well as subsonic filter.

We didn’t stop at the size, why not improve the power too? That is exactly what we did, by bumping up the power on the IX3.4 to 100 watts x 4 channels at 4 ohm and 340 watts x 2 at 4 ohms. The great news is the new Class-D design is very efficient and very low distortion, so you will only need a mere 50 amps of fusing for the all new IX3.4 while hearing all the right notes.