Best Dopro Plate Guards in 2026

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Screw Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

Ideal for pickguard bass DIY custom;Enough material for 2 Tele or 2 Strat or Jazz Bass, one P-Bass of your own design and choice

3Ply Black/White/Black PVC material,0.09 inch thickness

Size:12 x17 inch (290x435mm)

11 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster.Back plate is as pictures shown.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: orange shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

This Pickguard fits USA/Mexican Vintage 5 Hole Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are no mounting screw holes for the pickup; Pickguard is made of plastic acrylic, not Metal,it has plastic films which should be peeled off after installing

Thickness is about 2.6mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Awesome pickguard screws,evenly finished and snugged up well in some dense wood,the heads coating does not come off easily

When a guitar for replacement pickups or wiring replace their rusty screws with these new screws can really brighten up a guitar

The mounting screws vary quite a bit, so you definitely do need to pick through them and find the right size for the job,They are exact specs of any screw you find for pickguards and back plate covers

11 screw holes in the side of pickguard, 2 pickup holes (humbucker - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 3Ply constructions made of quality PVC plastic material. Color: white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

Material: Plastic, not Metal

The pickguard has plastic protective films on it

One humbucker and on pot hole for most Fender Delonge Strats

11 screw holes in the side of pickguard, 2 pickup holes (humbucker - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

11 screw holes in the side of pickguard, 3 pickup holes (single coil - single coil - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

8 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

11 screw holes in the side of pickguard, 3 pickup holes (humbucker - single coil - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster. Back plate is as pictures shown.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

8 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: white pearloid / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

Important note: there are no mounting screw holes for the pickup hole; Made of plastic; The pickguard has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

11 screw holes in the side of pickguard, 3 pickup holes (single coil - single coil - humbucker) were cut to fit American/Mexican Standard Fender Stratocaster.Back plate is as pictures shown.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: brown tortoise shell / white / black / white.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation.

This pickguard fit 4 stings standard Fender Jazz Bass made in USA or Mexico,not Squier Jazz Bass. If you have other types of Jazz Bass guitar, you may need a little modification for line up.

There is 10 screw holes in the side of pickguard, without truss rod notch. No holes for thumb rest or pickup cover.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: red tortoise shell / white / black / white.

This Pickguard fits 13 Hole USA/Mexican Fender Standard P Bass,but not Fender Squier P Bass or other types of P Basses.If you have other types of P Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard,without truss rod notch. No holes for thumb rest or pickup cover.

There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation. PURE aluminum foil shield on the backside, better shielding property and anti-interference.

This pickguard fit 4 stings Fender P Bass pickguard replacement, American and Mexico standard models, will not fit Squier or 5-string Precision Bass guitar. If you have other types of Precision Bass guitar, you may need a little modification for line up.

There is 13 screw holes in the side of pickguard, with truss rod notch.

Material: 3Ply constructions made of quality PVC plastic material. Color: cream / black / cream.

This pickguard fit Fender 69 telecaster thinline re-issue guitar part, please check the dimension before buying this pickguard.

There are 12 hole standard mounting pattern with counter-sunk mounting screw holes.2 control pot holes pre-drilled in standard positions.

Material: 3Ply constructions made of quality PVC plastic material. Color: ivory white / black / ivory white.

This pickguard fit Fender 69 telecaster thinline re-issue guitar part, please check the dimension before buying this pickguard.

There are 12 hole standard mounting pattern with counter-sunk mounting screw holes.2 control pot holes pre-drilled in Standard positions.

Material: 3Ply constructions made of quality PVC plastic material. Color: mint green / black / mint green.

Fits American/Mexico Fender Stratocaster which has 3 or 4 mounting-screw holes for humbucking pickup, including American standard, hot rod, American deluxe, lonestar, fat strat, and classic series '70s models.

There is 11 screw holes in the side of pickguard, 3 pickup holes (single coil/single coil/humbucker); Back plate as the photos shown.

3 Ply constructions made of quality PVC plastic material- mint green / black / mint green.

This pickguard fit Fender left handed Telecaster guitar part. If you have other types of Tele guitar, you may need a little modification for line up.

There are 8 screw holes in the side of pickguard and 2 screw holes fit neck pickup.

Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: black pearloid / black / white / black.

This Pickguard fits USA/Mexican Fender Standard Jazz Bass,but not USA Deluxe Jazz Bass, or Fender Squier Jazz Bass or other types of Jazz Basses.If you have other types of J Bass,you may need to make a little modification to let it fit

Pickguard is made of plastic,it has plastic films which should be peeled off after installing

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates

Screw Head Diameter: 1/8 inch( 3mm)

Screw Length: 1/2 inch(12mm)，the standard for Fender

ALNICO 5 PICKUPS -vintage 50s tone; beveled pole piece; stylish clear bobbins; output of neck pick-up: 7.4KΩ; mddle p'up: 8.6KΩ (reverse-wound to eliminate hum); bridge p/u: 9KΩ

ELECTRONICS - - import 5 way pick-up switch; full size A250/B250k potentiometer; 0.022uf, 600V orange drop capacitance, (please contact our service team if need wiring diagram)

DROP-IN PICK GUARDS - 3-ply pick guards with large back shielding, fully loaded pick ups & controls (pup switch, 1 volume, 2 tone); simply solder 2 black wires to ground and the white wire to hot of output jack

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit

8 mounting screw holes and 2 screw holes for neck pickup

4ply: Abalone Pearl/black/White/black PVC material,0.09 inch thickness

Fits Fender Style US/Mexico Style Standard Stratocaster Style Modern Style.If you use it for other Strat style guitar, you may need a modification for line up.

Pickguard: 11 Holes, SSS Style. 4Ply Light Blue Pearl/White/Black/White, Pearl Plate and PVC Material

Back Plate: 6 Holes, 0.092 inch thickness. 4Ply Light Blue Pearl/White/Black/White, Pearl Plate and PVC Material

Pickguard is made of PVC Plastic and top layer is printed pattern by 3D technology

This Pickguard fits 11 hole modern standard Fender Strats made in USA or Mexico,but not Fender Squier or other types of Strats. If you have other types of Strats,you may need to make a little modification to let it fit

Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness)

✔ | WIDE COMPATIBILITY | - The screws fit for most guitars or basses; Compatible with countersunk pickguards and cover plates.

✔ | PRODUCT DIMENSION | - Total length about 12mm; thread diameter about 3mm.

✔ | HIGH QUALITY MATERIAL | - The screws are made of high quality metal.

🎸【Rosewood Grain pick guard with rosewood finish】the pick guards made of ABS with rosewood finish to have an awsome rosewood finish, single coil pickup's covers and knobs made of copper, alnico magnets produces a vintage style pickups

🎸【Easy to Install with Minimal Soldering Required】all parts are ready to drop into your guitar body, like SSS pick ups, 5-position pickup selector switch and with push/pull switch on a tone pot, all were prewired and loaded; 11 holes were pre-drilled and guitar pick guards screws including, only need to take few minutes to solder ground and output wire

🎸【Ideal DIY guitar parts and replacement】pickguard and back plate protect the guitar from scratches and play an important role in guitar tremolo, is a good choice as guitar parts / accessories for luthiers to buold or repair guitar