Best Ogdni Electric Guitar Pickups in 2026

Includes 3 individually wrapped sets

Ernie Ball Slinkys are played by legends around the world including Slash, Jimmy Page, Metallica, Eric Clapton, and more

One of the original Slinky gauges, Super Slinky has remained one of the most popular electric guitar strings for decades

Wireless Guitar transmitter receiver set designed for electronic music instruments like guitar, bass, etc.

2.4G uncompressed wireless signal transmission, low noise and latency, wireless guitar system effective range is about 30 meters.

Wireless Guitar Supports 6 sets of devices working at same time, one-to-one and no-interference; and one transmitter can transmit signal to several receivers at the same time also.

James Hetfield Signature Pickup Set

"Stealth" looking set

Active tone with the clarity and punch of a passive pickup

The ultimate Hot Rodded humbucker set

Matched set of JB and Jazz Neck models

Combination versatile enough for classic rock to extreme metal

Produces the characteristics of a vintage-style Stratocaster.

Offers increased output.

Alnico V magnets with Polysol-coated magnet wire.

Calibrated set of neck and bridge pickups for six-string guitars.

Triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.

Designed to duplicate that classic warm sound yet they have slightly more output to give you a bit more crunch for the punch.

Compatible with electric guitar which can be installed humbucker pickup.

Magnet: ceramic humbucker pickup, 6 non-adjustable slug pole pieces & 6 adjustable screws pole pieces.

Resistance: Total is 14-15k ohms, single coil is 7-8k ohms. Position: Bridge pickup.

【Box of screws 】It's a bunch of screws in a plastic box, the whole kit includes 9 types of screws and 2 types guitar strap buttons, 3 pieces random color guitar picks for electric guitar, total 256 pieces, all store in a plastic box, convenient to carry and keep.

【DIYers delight 】Perfect for a DIY project, comes with 9 Different types of screw, this box can basically provides you with all you need screw kit for electric guitars repair.

【Guitar strap button】2 types guitar strap buttons,easy to install, just attach it to your strap, and screw securely into locking position.

Brand new and high quality humbucker pickups with mounting screws and black plastic mounting rings.

Wide applicability, compatible with electric guitars which can be installed humbucker pickup of the guitar.

Neck pick up is a warm and sweet 15.05 k-ohms with an inductance of 6.8 Henries. string spacing is 50mm. Distance between the pole pieces is 10mm.

Dimensions: Outside(L x W): Approx. 92.5 x 46.3mm(3.64 x 1.82 in); Mounting Screws Distance (L x W): Approx. 81.4 x 37.2mm(3.2 x 1.46 in); Neck Ring Height: Approx. 5.88mm (0.23 in); Bridge Ring Height: Approx.7.88mm(0.35 in). Please check the parameter drawing in the attached pics before placing your order.

Humbucking pickup ring set - neck and bridge, flat bottom.

Metal construction, durable and sturdy, not easy to deform. Nice accessory to replace the broken or old pickup rings to dress up your guitar.

These Pickup Rings in black color are wonderful DIY parts for guitarists or luthiers.Compatible with electric guitar or other similar guitar parts,which are used to replace your old pickup rings.

It's so easy for you to install these two mounting rings with screws.(included 8PCS).

Metal construction, stable and sturdy and you needn't worry about deforming.

Compatible with electric guitar which can be installed humbucker pickup.

Magnet: ceramic humbucker pickup, 12 adjustable hexagonal screw pole pieces.

Resistance: Neck pick is 7-8K, bridge pickup is 14-15K.

Ideal for general LP style double coil pickup replacement. Neck pickup pole spacing: 50mm; Bridge pickup pole spacing: 52mm.

Resistance: Neck 7.93k-ohms; Bridge 8.48k-ohms; Inductance: Neck 3.81H; Bridge 3.98H.

PVC coated magent wire, Ferrite & Alnico-V magnet, two conductor. Gold cover with black frame.

Dimensions: Outside(L x W): Approx. 92.4 x 46.3mm(3.64 x 1.82 in); Mounting Screws Distance (L x W): Approx. 81.4 x 37.2mm(3.2 x 1.46 in); Neck Ring Height: Approx. 8mm - 8.9mm(0.31 - 0.34 in); Bridge Ring Height: Approx.10.3mm - 10.6mm(0.41 - 0.42 in). Please check the parameter drawing in the attached pics before placing your order.

Professional quality - metal curved bottom humbucker pickup rings (2) in Black finish. Metal construction, durable and sturdy, not easy to deform.

Complete set - Includes both Neck and Bridge position humbucking pickup mounting rings with curved bottom. Nice accessory to replace the broken or old pickup rings to dress up your guitar.

Single coil pickups fit Fender stratocaster squier electric guitar pickup replacement.

Magnet: Alnico 5; Pole pieces: flat fixed. Cream cover, ABS plastic.

Resistance: Neck is 6-7K; Middle is 6-7K; Bridge is 7-8K.

These are excellent value LP alternative humbuckers

Fully wax potted and sealed.Pickup Pole Spacing: 50 mm / 52mm

DC Resistance: NECK:9.5-10K BRIDGE:9.5-10.5K

They sound like regular high output ceramics ，it has really bright mid-tones and low end.The open design make the output volume clear and bright.

It is the standard style for 5-wire pickups..Applicable both guitar, high output for punk, metal and other heavy metal rock style.

Where N stands for neck pickup and B for bridge pickup

All-in-one pre-wired electric guitar pickup harness for 6-string instruments.

With tone control and volume control, straight jack.

Pickup mounted in plastic mounting ring for easy of installation.

The Pickup output a strong sound, like to play metal guitarist, is a good choice.

Hot Rail 2-Dual Blade Electric Guitar High Output Track Type Four Coil Humbucker Pickup Black

Comes with connecting wires, with strong magnification

🎸This guitar pickups suitable for 6-string instruments, ready to mount in your cigar box guitar or other stringed instrument without any need to solder or worry about wiring schematics.

🎸Adjustable pole pieces for perfect balance and smooth threadless tops.

🎸Tone and Volume knobs are included along with mounting hardware for good measure.

🎵 【Updated SSH Configuration】pre-loaded single coil pups for neck and middle position, bridge position with humbucker pickup, all with alnico v magnets bar and fully wax potted, with upgraded clear bobbins, an exact replica of the original Alnico V stratocaster pickups

🎵 【Great Sound】the humbucker bridge pickup is clear and rich in tone, when you add gain or distortion, it's not muddy sounding but has that crunch you expect for blues, country, and rock. The single coils with high gain and distortion are great

🎵 【Supper Easy to Install】only take minutes to solder 3 wires: 2 red pre-tinned wires are for the ground on input jack and spring claw, the white wire for the output hot of jack, or solder other way as you like to have desired sound

♫ Compatible with electric guitar which can be installed humbucker pickup.

♫ Magnet: Alnico 5 humbucker pickup, 12 Pole-Pieces : Flat Top (Adjustable Screw).

♫ Bobbin : Plastic, Base : Copper-nickel.

RUBBER MAGNETS - both bridge pickup and neck pick-up loaded rubber magnets, gold-plated metal housing helps reduce hum; 42 gauge magnetic enamel wrapped wire, fully wax potted, shielded wires

PICKUP POLE SPACING - height of pole pieces are individual adjustable, pole spacing of bridge PU is 52mm and neck pickup is 50mm

DC RESISTANCES - specification of double-conductor wire(tip pre-tinned): 2547 26 AWG enamel 80℃ 300V; lead length of bridge - 9.05" / neck - 14.17"; DC resistance of Neck pickup :6.6kohm / Bridge pickup :7.6 Kohm

Fits most Strat style electric guitar, middle position. Middle pickup is reverse wound/reverse polarity, delivers a humcancelling feature

Genuine Wilkinson parts. 52mm pole spacing, staggered polepiece, fiber bobbin, wax potted

Vintage voiced tone single coil pickup. Alnico V magnets provide incredible focus and dynamics

The open design make the output volume clear and bright

This humbucker open ceramic magnet guitar pickup with black umbrella-head screws fits for double humbucker guitar

Fit for electric Guitar , with high output for punk, metal and other heavy metal rock style

♫EASY INSTALL: This wiring harness is completely prewired. What you need to do is solder your guitar pickups to the switch and ground them to the volume pot. It is very easy to install.

♫PREMIUM MATERIAL: Made of high quality metal and electron components, this guitar wiring harness set has excellent workmanship and good texture, it is durable and convenient to use.

♫PACKAGE CONTENT: This package comes 7 nuts and 4 gaskets, no need for other mounting accessory, easy to operate.

🎸【Rosewood Grain pick guard with rosewood finish】the pick guards made of ABS with rosewood finish to have an awsome rosewood finish, single coil pickup's covers and knobs made of copper, alnico magnets produces a vintage style pickups

🎸【Easy to Install with Minimal Soldering Required】all parts are ready to drop into your guitar body, like SSS pick ups, 5-position pickup selector switch and with push/pull switch on a tone pot, all were prewired and loaded; 11 holes were pre-drilled and guitar pick guards screws including, only need to take few minutes to solder ground and output wire

🎸【Ideal DIY guitar parts and replacement】pickguard and back plate protect the guitar from scratches and play an important role in guitar tremolo, is a good choice as guitar parts / accessories for luthiers to buold or repair guitar

GD CR resistance: 7.2k 15k

String distance: 50mm/52mm

Size: Approx. 69 x 38 x 19mm/2.72 x 1.50 x 0.75""(L x W x H)

SCOPE OF APPLICATION:fits USA/Mexican Standard Strat.

HIGH QUALITY MATERIAL：Made of 3ply PVC material.

PACKAGE INCLUDES: 3 single coil pickups with Ceramic magnet,2 tone & 1 volume knob, 5-way pickup switch & 1x Guitar Backplate & Included mounting screws.

LP style electirc guitar wiring harness with metric components, direct fit for Epi LP/SG/DOT series with 2 humbucker setup; Standard model comes with quick connectors on toggle switch cable

Very easy to install, all you have to do is solder your two pickups signal wire on the two volume B500K pots and ground wire to the back housing of the same pots; Please verify our diagram for wiring

Comes with 500K full size potentiometers (2*A500k on Tone positions and 2*B500k on Volume positions) with .022uF capacitors and 1/4" Output Jack