Best Vikocell in 2026

For rework and touch-up of smt, smd, and through hole solder joints

Suitable for automotive, computer, telecom

10Ml pen applicator with specially designed felt tip

Material: Monocrystalline Silicon

Size: 125mm x 125mm Thickness: 160um Color: Blue

Max. Power: 2.8W Nominal Capacity: 0.5V

Kester 24-6040-0027 - (1) Spool, 1 Pound per Spool

Diameter: 0.031" Inch (0.80mm)

Alloy: 60% Tin / 40% Lead (Product contains Halogen)

Lead free (RoHS Compliant)

Removes tip oxidation

No-Clean compatible formulation

The solder sucker has a large capacity cylinder and silicone tube at the tip for improved suction

[Uses] For solder removal of substrates

Nozzle is heat-resistant silicone tube that will not damage the object

Size: length 186 x width 84 mm.

Applicable models: FX-600, FX-601, PRESTO, DASH

Weight: 380 g.

Easy-To-Use Adjustable Temperature Control Built Into The Handle

Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste

Fast Release Tool For The Quick-Change Nozzle System

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the magnetic plate. Clamp a project (circuits, jewelry, hobby model) securely in place so you can solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 4 magnetic, adjustable 16” and 8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Then move, rearrange and position to keep them steady so you work with accuracy.

WEIGHTED BASE: Rubber feet keep the large powder coated steel 6” x 9” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with precision!

WHEN YOU NEED A HAND: Bolt your PanaVise (not included) to the mount then place the flexible, adjustable gooseneck arms anywhere on the magnetic plate. Clamp a project (circuit board) to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Mount the PanaVise (hardware included) then clip the project to the 360° rotating alligator clamps with locking thumb nuts. Connect, move and position 4 magnetic, adjustable arms to the steel base so you work with ease.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 4.6 lb heavy base from sliding and stable. Wherever you stick the arms - the oval base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

WHEN YOU NEED A HAND: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the XL magnetic plate. Clamp a large project (circuit board, jewelry, drone) securely in place to solder, paint or repair with precision. Work smarter not harder!

STRONG MAGNETIC ARMS: Freely connect 5 magnetic, adjustable 16”/12”/8” arms to the plate. Clip your project to the 360° rotating alligator clamps and lock using thumb nuts. Move, rearrange and position to keep them steady so you can work with accuracy.

WEIGHTED BASE: Rubber feet keep the extra large powder coated steel 8.5” x 11” heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with accuracy!

【Multi-Function】Silicone work mat built-in scale ruler (0 ~38 cm/0~15 in), 124 screws position and 3 pcs magnetic parts areas and 18 notches to classify precision parts,which improve your work efficiency and make the maintenance platform cleaner and tidy.

【Heat Insulation】Heat insulation mat can resist the temperature as high as 500℃ and is anti-corrosive also,Its texture is soft, supports high temperature soldering work directly, which can protect maintenance platform from damage.

【Anti-Slip】Both surface and back side are adopting the anti-slip design, it won't slide around on your counter or station, and its attractive design keeps small parts from sliding, which prevent them from losting or misplacing.

4.5 ft of Low melting point alloy for IC removal.

Easily remove ICs without a Hot Air Station or Hot Air Gun.

Comes in convenient 6.5" lengths with instructions.

12 grams each / 10 per pack

Used for cleaning soldering tips

Material Composition: 100% brass

Includes (4) brazing rods .050 inch x 1/8 inch x 20 inches Stay-Silv 15% Flat Brazing Rods

Uses for many copper-to-copper applications where moderate fit-up can be maintained and brazing temperature is not critical.

Solidus Temperature: 1190°F, 643°C | Liquidus Temperature: 1475°F, 802°C | Recommended Brazing Range: 1300-1500°F, 705-815°C

Premium quality ER309L stainless steel TIG welding rods with available diameters 0.045", 1/16", 3/32" and 1/8"; 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER309L; 36" (914mm) length of rod with single end stamped; typical chemical composition %: C=0.025, Cr=24.5, Ni=13, Si=0.38, Mo=0.35, Mn=1.88, Cu=0.35, P=0.02, S=0.01, remain=Fe.

Features and Applications: filler metal ER309L rod for TIG welding (GTAW) process to weld dissimilar alloys like mild steel and the stainless steels, and also for direct overlay on mild steel for corrosion applications; occasionally used for welding "18-8" base metals when severe corrosion conditions exist or dissimilar metals; ER309L stainless steel exhibits high strength and good toughness over a wide range of temperatures; shielding gas required, usually 100% Argon.

☑️ Premium Quality - Solder Star tips heat up well, keep a nice tin and have excellent heat transfer.

☑️ Wide Assortment - Tips set includes one piece of ETA, ETT, ETB, ETS, ETD model (screwdriver, chisel, conical). With this set in hand, you will be able to handle just about any electronic soldering task.

☑️ Perfect Compatibility - Our ET series tips work perfectly with Weller WES51, WESD51, WCC100, PES51, WE1010NA, EC1201A, EC2000, EC2001 analog, digital stations and pencils (not compatible with soldering-guns).

100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering; 0.1" hole spacing for DIP integrated circuits and headers.

THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions

MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use; With pre-tinned plated holes; Double sided board with plated-thru holes allows components to be easily soldered to either side of the board

🍏🍎Upgraded System - Our nebulizer machine mainly updates the internal chip and the operating system. Compared with the original model, the upgraded nebulizer can help you for a longer time. The atomization is more stable, the mist is more delicate, and the atomization particles are about 0.5-2 μm. The absorption effect is better.

🍏🍎Adjustable Atomization Rate - The atomization rate is about 0.15 ml/min to 0.35 ml/min, which is suitable for toddler, kids, adults and the elderly. It is a necessary health magic for every family. The nebulizer machine comes with mouthpiece (our mouthpiece has a opening above it, which allows you to breathe more comfortably when you use it), adult mask and child mask. You can choose your own needs.

🍏🍎Unique Details - Jet nebulizer uses AC 120V/60Hz power supply. The power cord is 1.5m which long enough for you to watch movies or rest while atomizing. Compressor nebulizer comes with 10 filter cottons, which needs to be replaced regularly to obtain more fresh air. Usually replace it every 3 months (actually depends on your use frequency). The switch with dust cover to prevent water from entering and damage the switch, so as to prolong the service life of the machine.

POWERFUL: Heavy duty jobs made easy with one-handed loading operation with simple push-button trigger that quickly releases the plunger to create an immediate and direct vacuum impulse at the desoldering tip. Comfort grip suitable for both left and right-handed users.

EASY TO USE: Trigger activates the plunger including the self-cleaning shaft also acting as a valve during the initial vacuum stroke. As the shaft leaves the tip, a high-vacuum impulse force is created to lift, suck and remove the molten solder into the barrel.

EASY TO MAINTAIN AND CLEAN: A convenient bayonet-twist barrel allows the pump to be taken apart for fast routine cleaning. Self-cleans each time the tool is reloaded.

Upgrade Product: Circuit Board Holder has four pillars, each pillar is magnetic, adjustable magnetic helping hands can be positioned anywhere on the heavy steel base, which can stuck any shape of the board.

Magnetic Flexible Arms: 4 adjustable metal gooseneck arms with strong magnetic base,which have a powerful attraction to the steel base. We included two 9" arms, two 4.5" arms helping hand arms, Completely free your hands up and work easier than ever before.

Stainless Steel Base: 9 x 6 inch powder coated steel base with non-slip rubber pads, keep the soldering helping hands from sliding around on your bench.

WHEN YOU NEED A HAND: QuadHands Classic is the ultimate workbench tool and vise. When you need a third hand it holds a project so you can solder, weld miniatures, paint or glue with precision. Clamp it and move it to any position. Work smarter not harder!

STRONG CLAMP: Stainless steel rotating alligator clamps with removable silicone covers (protects microchips) lock into place with a quick turn of a thumb nut. Perfect for engineers, artists or hobbyists who work on projects that require extreme accuracy.

INNOVATIVE FLEX DESIGN: QuadHands Workbench kit is the perfect work station assistant. Four heat resistant, secured-in location arms (8” & 16”) bend and move with flexibility allowing you to steadily use a soldering iron for prolonged periods of time.

【One-handed Use Desoldering Pump】The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.

【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.

【Alloy Braided Solder Wick】Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.

Occupational Health & Safety

Country of Manifacturer: Mexico

Manufacturer: Oatey

Active range 1050°F - 1800°F

1lb Jar

Made in USA

Premium quality Tweco-style twist-lock insulated cable connector/adapter connection via positive cam action and female terminal adapter (threaded stud to Tweco male connector).

Tweco-style insulated male connector is with a pin of 5/8" diameter and 45° angle terminal adapter (2-AF) is with 17/32" stud hole and female acceptor for Tweco male plug. All connectors/adapters are with heat and oil resistant insulated covers.

Connectors are compatible with Tweco 2-MPC, Lenco LC-40, Miller 191981/218677 for welding cable AWG #4-2/0 connection. Female terminal adapter is compatible with Tweco 2-AF and Miller 218678. Connection via a positive cam action.

Solder Paste

Leaded

No Clean

【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.

【Powerful Suction Solder Sucker】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.

【Alloy Braided Solder Wick】Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.

Comes with 2 slits and removable cutouts

Dimensions: 2-1/4" x 2" x 1/2"

Package Dimensions: 1.016 H x 15.748 L x 8.382 W (centimetres)

Package Weight: 0.022 pounds

Made to withstand even the most demanding jobs

Active range 1050°F - 1600°F

Model Number: SSWF1

Item Package Dimension: 4.75" L x 4.75" W x 3.38" H